|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-01-2022, 06:54 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2022
Posts: 7
|
Evening All,
Thanks for the add 👍. We’ve just bought a 2008 Zetec Focus for the young fella to learn to drive in a manual, apparently my 60 year old Land crab wasn’t cool enough 🤣. Anyway the top lid of the centre console/arm rest is busted, I’ve had a quick look at how to pull the hinge out so I can work magic with epoxy/super glue, but I got a bit bored, can I impose upon the good nature of this board to get some tips? Otherwise she’s a little rocket ship. Ian |
||
|
|
|
04-01-2022, 11:52 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,316
|
Just be careful when removing it as the arm on the hinge is slightly kinked otherwise it's easy enough.
__________________
 Observatio Facta Rotae
|
||
|
|
|
| This user likes this post: |
|
04-01-2022, 09:50 PM
|
#3 | ||
|
Starter Motor
Join Date: Jan 2022
Posts: 7
|
Thanks Russell,
Any tips on how to get to the point where I can take the hinge pin part out? I reckon I might have to take a photo to show what I mean, sometimes my explanation isn’t as clear as I’d hoped 👍 Ian |
||
|
|
|
|
05-01-2022, 03:08 PM
|
#4 | ||
|
Regular Member
Join Date: Mar 2006
Location: Newcastle, NSW
Posts: 352
|
If it's the same as an 09, it's remove the rear plastic part, there are 2 Torx screws behind the ash tray, and 2 at the top inside the console. Once they're undoe, the rear peice slides out and then you cna undo the 4 Screws holding in the hinge.
__________________
Current: 2016 Camry 1966 Mustang Coupe Previous: 2011 SZ Territory Titanium 2008 Ford Edge AWD Limited Silhouette BF XR6, ZF Auto White EF GLi, XR look alike VH Commodore |
||
|
|
|
| This user likes this post: |
|
09-02-2022, 11:12 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,705
 
|
Here are all the factory components of the console if its any help.. not much still available from Ford though.
LS LT Focus Console.PNG |
||
|
|
|
Centre Console Lid
Linear Mode
