|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-10-2021, 03:44 PM
|
#1 | ||
|
Regular Member
Join Date: Dec 2008
Location: Sydney
Posts: 128
|
Hey guys, I had a leak from the PCV area so I swapped my PCV Valve and gaskets and hoses. Check out the vid if you need some tips.
https://youtu.be/qyUOlSV-c3c Mine was leaking from the rear hose. It seems that this collapsed under vacuum over time, causing a leak where the metal pipe connects to the rear hose. Hope this helps someone out. |
||
|
|
| 3 users like this post: |
|
11-04-2022, 12:00 PM
|
#2 | ||
|
Regular Member
Join Date: Jun 2020
Location: Hunter Valley
Posts: 31
|
Hey Mr Horus works!
I've messaged you on your channel before, but couldn't PM you my details, lacking any social media. Please look for my PM on this forum |
||
|
|
|
Focus MK1 - PCV Valve System - DIY Guide
Linear Mode
