![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Bar For non Automotive Related Chat |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,860
|
I’ve got four of these to do, they’re window regulator guide blocks:
The back of the pin is heavily counterbored as shown, the receiving hole is not chamfered at the exit side. I need to make/adapt a tool to set these pins very solidly. Thinking of using a vice with appropriate tooling, to progressively deform the piece. Would I be better placed to form a bevel on my “setter” or a domed end? Dry or greased? |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 10,827
|
Sort of like an eyelet making tool ??
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#3 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,860
|
Hadn’t thought about craft gear. It’s probably a few levels above usual upholstery or couture strength requirements though.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 10,827
|
I bought one for canvas and is very robust. My old man had several commercial style ones being an upholsterer.
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,938
|
Something here perhaps https://www.birdsall-leather.com.au/...pl.php?pager=1 or something (likely a stud or grommet anvil) from a marine sailmaker or tarp supplier perhaps.
__________________
regards Blue |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,938
|
If you have an arbor press or hydraulic press some of the dies & dimple accessories for them should work too. These sort of things https://www.gizmoplans.com/best-shop-press-accessories/
__________________
regards Blue Last edited by aussiblue; 24-11-2022 at 06:40 PM. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#7 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,938
|
.... or https://www.ebay.com.au/itm/27524996...Bk9SR6aJxoeVYQ or https://www.ebay.com.au/itm/29483649...Bk9SR6aJxoeVYQ etc
__________________
regards Blue |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#8 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,860
|
It’s getting way overthought here.
![]() Wiz has indirectly furnished a detail, the setter should be closer to domed than chamfered. I’m thinking my big vice, a suitable socket on the “blocking” side and my improvised setter to the counterbored side. A sacrificed 8mm high tensile bolt should do it - the pin shank is only about 6mm across. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#9 | |||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,938
|
Quote:
__________________
regards Blue |
|||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#10 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 21,860
|
Methodology, shown in a photo. I used my setter and a large vice to perform the task.
The plastic guide with metal pin, on the pin head side the guide’s cap snugly holds a quarter inch socket (shown with a spare guide). That provides strong, even backing support. On the counterbored side, the bullet tip ground onto my random bolt works with a little moly grease to spread the pin base as I clamp it all in a vice. I backed off the vice slightly and rotated the “setting tool” a one-third turn twice over. A much more calm-inducing approach than wallering away with a ball-pein hammer and the pin head precariously supported on a benchtop. |
||
![]() |
![]() ![]() |