|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
10-01-2018, 02:28 PM | #61 | |||
Starter Motor
Join Date: Aug 2013
Posts: 2
|
Quote:
I took the Fan Controller to Injectronics. They didn't have any refurbished ones for my 'Early Model' Car. They don't deal directly with the Public and suggested I take it to Repco or Burson who are their 'Agents'. So I took it to Bursons who sent it to Injectronics to get 'refurbished'. It cost $358 and I got it back about a week later. Works Great Now!! Peeter |
|||
23-06-2018, 03:13 PM | #62 | ||
Starter Motor
Join Date: Mar 2013
Posts: 24
|
The fan controller in my EA finally died. Cannot complain - almost 27 years!
A new transistor, associated bits (about $45 including postage) and a few hours and good as new. Thanks aussiblue. |
||
This user likes this post: |
09-12-2019, 01:23 PM | #63 | ||
Starter Motor
Join Date: Jul 2019
Posts: 2
|
I have got this problem with my AU2 Fairlane. Iv got the replacement resistor and im all set. Now .. how the hell do I remove the glovebox? I feel a bit silly with this one. Cant find the screws anywhere, does it just clip in? ok .. fonud it! But the fam/blower assembly looks much different to the ones in this forum.
How the hell do i get at it without pulling half the dash out? Last edited by booHa; 09-12-2019 at 01:32 PM. |
||
09-12-2019, 01:33 PM | #64 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,360
|
OK, you found it - good.
The resistor should be in the “pinch” between fan housing and where the evaporator is sited. |
||
12-12-2019, 06:55 PM | #65 | ||
Starter Motor
Join Date: Jul 2019
Posts: 2
|
Hi, I sure did find it. It was a bit of a bugger to get the unit out but eventually (ergh and a few cuts and choice words, a few beers too haha) I got it done. You should have seen the level of crap that came out too.. half a shopping bag of leaves, dirt, random debris, sticks and stink! Why these cars dont have a cabin filter is absolutely beyond me, outrageous really. I should have put a mesh or something in place but hey its lasted this long (20 years nearly) I dont suppose I will keep it for too much longer.
But at the end of the day AussieBlue gave EXACTLY the right data. The transistor married up perfectly, in fact it was exactly the same as the existing one. So after a good vacuum, a bit of fiddling and soldering and putting everything back, refitting the under-bonnet fuse and voila - IT WORKED PERFECTLY. Thank you guys very much. Another happy customer |
||
This user likes this post: |
21-12-2022, 03:29 PM | #66 | ||
Starter Motor
Join Date: Dec 2022
Posts: 2
|
I have BA Ute and the acc fun won’t turn off .
Anyone be able to help Cheers |
||
23-12-2022, 05:41 PM | #67 | ||
Next upgraded Mk1 Leopard
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,913
|
Greery this is the AU section and the last post was 2019. Try the BA Forum.
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
|
||