![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Nov 2019
Posts: 4
|
My AU III series Falcon Forte wagon has just developed a poor FM reception status. It takes about 15 minutes of the radio being on before I receive any reception. It tends to become clearer the longer I leave it switched on. The only thing I can come up with is that there might be a weak solder connection. I'm more mechanical minded than electrician minded. Any ideas ?
Thanks Terry F |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
#neuteredlyfe
![]() ![]() Join Date: Apr 2012
Posts: 10,528
|
Is the stereo factory or aftermarket?
Have you checked to make sure that it is plugged in properly at the back of the stereo? |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Starter Motor
Join Date: Nov 2019
Posts: 4
|
My radio is OEM from 2001.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Hervey Bay
Posts: 5,213
|
Your thought of a dud solder joint would be a fair assumption.
Normally an electronic device that starts working after a little time being turned on is due to something internally heating up, expanding and restoring a poor or broken connection. But it could also be a something like a failing capacitor as well. Might want to check for basics like dirt and corrosion under the ground screw of the antenna, inside the guard. Make sure a rodent hasn't eaten through the antenna cable. If I remember correctly later AU's had an automatic antenna. I take it the antenna is extending? Might the universe's way of telling you its time to upgrade the head unit. |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,944
|
Open it up and check for cold solder joints (check google images for "cold solder joints" to see what you are looking for and reflow the solder on any you find. Also see https://electronics.stackexchange.co...m-vacuum-tubes
__________________
regards Blue |
||
![]() |
![]() ![]() |