![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Dec 2008
Posts: 33
|
will ZC Titanium projector headlights plug into ZC Zetec and work?
Are the projector style any better than halogen? |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,019
|
I'll have to look at the wiring diagrams to be sure if they are plug and play but projectors are usually a decent upgrade on halogens. I know the FG XR6 (halogen) to FGII XR6 (projector) needs an adaptor wiring loom to make it work but that's mostly because the FG had a combined high/low beam + a high beam whereas the FGII has only a low + high with both staying on when in high beam.
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,019
|
The headlamp wiring diagram identifies a number of pins that are unique to '345' (high series) variants but the two lamps share common components other than the 'active' cornering lamps of the projectors although they are in physically different locations on the two lamps. The connector is a 14 pin but with only 12 used so perhaps check yours to see if you have all 12 wires.
You won't have the adaptive headlamp module so the cornering lamps will be in a fixed position and the other adaptive functions won't work but that shouldn't cause an issue as the GEM won't be expecting to get errors without it there. For more detail go and have a look at the MB Mondeo lighting wiring schematics in our technical portal as they are the same options. Diagrams 417-01-3 & 4 are for the normal headlamps and 417-01-5 & 6 are for projector or HID lamps.
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#4 | ||
Regular Member
Join Date: Dec 2008
Posts: 33
|
thanks for the great technical info. Much appreciated.
|
||
![]() |
![]() ![]() |