|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Early Falcon Car Club of Qld Inc The Queensland early model Falcon Club. |
 |
|
|
Thread Tools | Display Modes |
22-02-2024, 11:38 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2024
Posts: 3
|
Hello fellow XB Owners I NEED HELP Installing a electronic Dizzy into my 351 Cleveland WHER is the resistor wire? I know it runs from Coil to ignition but I need to find where to connect a nEW WIRE to run to Positive on Coil Colur location need help please
|
||
|
|
|
23-02-2024, 08:35 AM
|
#2 | ||
|
Regular Member
Join Date: Nov 2006
Location: Gold Coast
Posts: 175
|
The wire resistor to the coil is in the harness. If you unwrap the harness from the coil back towards the firewall you will see it.
It is a thick pink wire if you keep following it back you will get to a red/green (From memory) you need to run a new wire from that point.
__________________
Territory black VSI lpg XW GS Fairmont 351C toploader 9inch Mazda Bravo 4 X 4 |
||
|
|
|
|
23-02-2024, 12:15 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2024
Posts: 3
|
Hi mate some advice say its a red/purple wire from ignition which Ive found followed it back through firewall above brake booster then to junction near battery it seems to go on past battery and not to coil I note on coil positive side are 2 brown wires one thicker than the other so thinking is the thin brown wire the resistor wire so now about to solve that destination of the 2 brown hoping one connects to the red/purple damn am ove r it bloody ford engineers
|
||
|
|
|
|
23-02-2024, 02:31 PM
|
#4 | ||
|
Donating Member
 
Join Date: Jan 2005
Location: Morayfield
Posts: 28,115
  
|
The other wire is probably going to the starter solenoid.
__________________
I love Holdens.... |
||
|
|
|
Resistor wire
Linear Mode
