|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
08-03-2024, 03:07 PM | #1 | ||
Starter Motor
Join Date: Jan 2021
Posts: 3
|
My 2016 MD Mondeo Titanium Diesel with 67000 kms on the clock has intermittent problem with the auto engine on/off feature not restarting the engine. It usually happens before the engine has fully warmed up and always at a busy set of traffic lights. The engine will eventually restart via the ignition switch. Has anyone had this problem?
|
||
09-03-2024, 07:32 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
|
Just turn it off completely. The saving in fuel is not worth what it could cost in repairs.
Sent from my SM-S906E using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
This user likes this post: |
09-03-2024, 01:58 PM | #3 | ||
Starter Motor
Join Date: Jan 2021
Posts: 3
|
How can I permanently disable the damn thing?
|
||
10-03-2024, 09:15 PM | #4 | ||
Regular Member
Join Date: Dec 2022
Posts: 125
|
Don't take this as gospel, but I don't think you can. AFAIK it's legally required as part of the emissions control. I can't access configuration settings on my Forscan because my free license period ran out, and because they're Russian, we can't send money to them to buy the full license. So I can't say for certain.
I've just gotten into the habit of switching it off when I release the handbrake. It's just like switch, switch, gear lever. Becomes quite automatic. But if you really want to disable it, search old threads. There's a link in one to a little electronic circuit you can make that will electronically "toggle" the switch every time you start up. So the default effectively becomes off. |
||
10-03-2024, 10:36 PM | #5 | ||
Diesel Sniffer
Join Date: Jun 2015
Location: Sydney
Posts: 1,322
|
As suggested, u will find a manual over ride button/switch in the centre console(near the handbrake lever when in the down position) i also believe it can be coded out(from memory it's in the bcm)
|
||