|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
22-08-2006, 08:32 PM
|
#1 | ||
|
E-Series
Join Date: Apr 2006
Location: Melbourne
Posts: 272
|
well as the title says 1 is siting lower on 1 side. all i did was change the caster arm because is was bent put the car of the jack and now the car is sitting lower dose any 1 no way?
__________________
EBTS50 NOW WITH A UNICHIP 140RWKW THANKS TO BOG :eclipsee_ http://tinypic.com/14v6afr.jpg |
||
|
|
|
23-08-2006, 12:07 PM
|
#2 | ||
|
Oops, I slipped....
Join Date: Dec 2004
Location: Adelaide, SA
Posts: 1,861
|
How did the radius rod get bent? If it's from impact damage there's a pretty good chance the LCA, spindle, K-frame, chassis, inner guards etc etc are bent. If you tightened the suspension bolts up with the wheel hanging in the air, this could cause it, as well as having a swaybar not connected properly.
__________________
1995 EF Fairmont 5.0 Heritage Green - BTR with TCI 2500 stall - Ported E7's - Pacemaker Tri-Y's - 3" Mandrel-bent Lukey Exhaust 1984 XE S-Pack 250 Sno White - LPG - Single Rail - 2.5" Exhaust "Just because you don't understand something, does not make it wrong" |
||
|
|
|
|
23-08-2006, 12:11 PM
|
#3 | ||
|
E-Series
Join Date: Apr 2006
Location: Melbourne
Posts: 272
|
ok thanks for that it not bothering me any more it dosnt scrape or any thingumm i got a wheel agilnment to day and there trying to say that the lower balljoints r gone, needs R/H rack end, for some reasion he said only 1 side had a camber kit when i had both side fitted, and a re alignment
__________________
EBTS50 NOW WITH A UNICHIP 140RWKW THANKS TO BOG :eclipsee_ http://tinypic.com/14v6afr.jpg |
||
|
|
|
|
23-08-2006, 02:25 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Posts: 1,419
|
How Much Lower????
__________________
405rwhp LS1, FG XR6T Ute manual, VE series 2 Omega LPG. |
||
|
|
|
One side is sitting lower that the outher side :(
Linear Mode
