Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 26-08-2006, 08:23 PM   #1
5tees
Starter Motor
 
Join Date: Aug 2006
Posts: 2
Default TX5 AirCon relays and fuses

G'day

My first post. Just picked up a '90 TX5. All good except the Aircon does not come on. I have put 12v to the compressor clutch and it all runs OK. Can someone just tell me which relays and fuses (and where they are located) are used to control the air con?

Many Thanks

Paul.

5tees is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2006, 11:30 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

if there is no gas in the system the compressor clutch will not engage
its an inbuilt safety as not to burn out the compressor

the tx valve should be behind the glove box if that is faulty/leaking the air con will not work

the air con fuse( is , or should be) a 15 A number 14 middle row 5 fuses down from the top
the wiring is switch , blower motor control , resistor ,blower motor
wire colours should be blue /yellow blue/green and blue... .black earth
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2006, 01:37 AM   #3
MITCHAY
FF.Com.Au Hardcore
 
Join Date: Apr 2005
Location: Canberra
Posts: 13,436
Default

Also if it is out of gas you might have to get it retro fitted to run 134a refridgerant. Mine's an 89 model and they wouldn't just top it up as it was ozone depleting. I'm not sure if this is the case with the 90 model. Some places do a free air con check. It cost me about $450 with gas to get the retrofit.
MITCHAY is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2006, 02:05 PM   #4
5tees
Starter Motor
 
Join Date: Aug 2006
Posts: 2
Default

Thanks Dirty Hands,

When I force it to run the air is freezing cold so I'm pretty sure is not down on gas.
It has also been updated to the new gas too.

Thanks for the pointers on the fuses - I'll check them tonight.
5tees is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:55 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL