|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-08-2006, 10:09 AM
|
#1 | ||
|
Regular Member
Join Date: Mar 2006
Location: Tassie
Posts: 142
|
Hi everyone. I am having trouble taking out the oil plugs in a 1600. I have accidently rounded one off so would it be possible to drill it out. I am using a 6mm alan key thing
Thanks |
||
|
|
|
01-09-2006, 11:48 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
if this is the gearbox
if you are going to drill coat the drill shank in thick grease so the drill fillings dont go into the box can you use a cold chisel and hammer on the outside edge of the plug to loosen ? I use a stick welder and zap a spanner /allen key or a nut onto the plug that gets the job done
__________________
My car goes Brumm Brumm |
||
|
|
|
oil plugs
Linear Mode
