|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-03-2005, 10:46 AM
|
#1 | ||
|
Da Shifty One
Join Date: Mar 2005
Location: Sydney
Posts: 1,586
|
Howdy PPLS,
Let me tell you about a crap week ive had... 1. Get the car back from the repairers and the boot light on the dash is still on. 2. They did a shit job of putting the bumper bar on as it held on with two clips that kep falling off. 3. Took about 4 hours with the stripes, not an easy process, there are a few minor bubbles but its not like ur gonna sitt there and stare at the imperfections. 4. Spent about 8 hours on the stereo system. What a nightmare!!! First i replaced the rear stocky speakers with Pionneer 6 X 9's Yes u are probably saying how the hell do they fit, well they do. It was a BIT*H taking off the rear panels, i ****ed up about 2 clips and scratched it but its all ok now as u cant see anything. 5. Then came figuring out a trigger wire for the amp, another BITCH. After using Pietoers directions i scratched the standard head unit, and f**ked the heater. So in the end just ran a wire form the fuse box using a blown fuse to the amp which worked quite well. But when i put everything back the heater started to work THANK GOD. Ive still got a few minor adjustments to do as the rear panel doesnt clip on properly. So in essence it was a very hard job thats gonna give you a lot of headaches, but at the end i beleive it was all worth it. Ill post more pixs of all the stuff i did asap. If any of you want help in doing the same thing let me know as i am more than happy to help. Last edited by MISTA FIESTA; 15-03-2005 at 07:02 PM. |
||
|
|
|
15-03-2005, 03:12 PM
|
#2 | ||
|
Candy White GTI
Join Date: Jan 2005
Posts: 1,516
|
hey... got pics yet?
|
||
|
|
|
|
15-03-2005, 05:12 PM
|
#3 | ||
|
Fairmont Ghia
Join Date: Dec 2004
Location: NSW
Posts: 2,144
|
 Tim! |
||
|
|
|
|
15-03-2005, 10:34 PM
|
#4 | ||
|
Candy White GTI
Join Date: Jan 2005
Posts: 1,516
|
looks awesome!! id be happy with that
 how much the stripes cost ? |
||
|
|
|
|
15-03-2005, 10:57 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 792
|
What directions of mine did you use? Also how did you manage to get the 6x9's in the stock hole?
__________________
COLORADO RED FIESTA ZETEC MODS - Window Tint, Bmc Panel Filter, Euro Plates, Ghia grill, Momo F16 leather gearknob, Momo Leather gearboot, WQ Zetec Front sway bar, WQ Zetec Sway bar links, WQ Zetec bushes. ICE - Alpine CDA9827, MbQuart Reference 6.5inch splits, MbQuart Reference rears, Rockford Fosgate Punch Stage 3 12inch Sub, Rockford Fosgate P4004 + P3001. |
||
|
|
|
|
16-03-2005, 09:22 AM
|
#6 | ||
|
Supes
Join Date: Jan 2005
Location: Sydney
Posts: 1,063
|
nice work on the GT stripes there......looks good.
__________________
Yes I DO drive a Toyota |
||
|
|
|
Some Pixs Of My Fiesta + Sound SYSTEM + GT Stripes
Linear Mode
