|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-07-2006, 10:37 AM
|
#1 | ||
|
Ryna
Join Date: May 2006
Location: Perth WA
Posts: 17
|
my engine is being rebuilt, in pulling it apart we discovered it was already 40 thou over, but the bores were screwed and pistons had chips at the top.
so it is going to be bored out to 60 thou, and new ACL flat tops put in. also bottom end balanced, crank grind and balanced, clutch balanced, lighten flywheel. then the head will have a service which includes hardened seats for unleaded all up the quote is about $1200 do you rekn its a good price? |
||
|
|
|
20-07-2006, 11:25 AM
|
#2 | ||
|
Regular Member
Join Date: Apr 2006
Posts: 72
|
Is that including labour, Im also in Perth and thinking of doing soemthing similar.
cheers :MrT_anim: |
||
|
|
|
|
20-07-2006, 12:20 PM
|
#3 | ||
|
Ryna
Join Date: May 2006
Location: Perth WA
Posts: 17
|
no, not labour, just sending the parts out to machine shop
|
||
|
|
|
|
20-07-2006, 12:38 PM
|
#4 | ||
|
Starter Motor
Join Date: Jul 2006
Location: perth
Posts: 6
|
im in perth too, where are u getting your quote from?
|
||
|
|
|
|
20-07-2006, 04:42 PM
|
#5 | ||
|
Thats Me
Join Date: May 2006
Location: Perth
Posts: 33
|
And the list of people go on
 I'd like to know where from aswell.cheers |
||
|
|
|
|
20-07-2006, 05:35 PM
|
#6 | ||
|
Starter Motor
Join Date: Jun 2006
Posts: 21
|
crown engines are pretty good. give nick a call, hes a champ.
|
||
|
|
|
|
05-09-2006, 11:40 PM
|
#7 | ||
|
Starter Motor
Join Date: Jul 2006
Location: perth
Posts: 6
|
racetune in bayswater sposed to be pretty good. u guys in perth contact me or add to msn djdaveking01@hotmail.com
|
||
|
|
|
|
06-09-2006, 03:31 PM
|
#8 | ||
|
Regular Member
Join Date: Mar 2006
Location: Perth, WA - NOR
Posts: 325
|
Or try ERR - (Escort Road & Race) in kelmscott, Tony is great, nothing is ever too much trouble.
__________________
GGR | SCT | Tein | Samco | Whiteline | Mongoose | Forge
|
||
|
|
|
|
06-09-2006, 03:33 PM
|
#9 | ||
|
Regular Member
Join Date: Mar 2006
Location: Perth, WA - NOR
Posts: 325
|
Sorry for the double post but all the Perth ppl should get together for an old school Ford cruise
I'm going to my first Ford Rallye Sport Club meeting tonight too... thinking of joining up
__________________
GGR | SCT | Tein | Samco | Whiteline | Mongoose | Forge
|
||
|
|
|
got a quote on engine work
Linear Mode
