Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 14-09-2006, 06:53 PM   #1
Dayvo
Starter Motor
 
Join Date: Sep 2006
Posts: 11
Default KF auto

Hi all , Just a quick question . My son has just bought a KF laser (auto ).
The car is in pretty good condition . The main problem is the auto gearbox , it seems to rev out in 1st gear ( doesn't seem to make any difference if you floor it if just take of nice and easy ) then it really slams into 2nd. I had a look under the bonnet and found that the hose that comes out of what looks like the servo ( in the top of the gearbox ) it is about 200mm long and has a screw stuck in the end to block it off. I guess it is a vacumn hose .
Does anyone know where the other end is supposed to be connected to ?
Thanks Dayvo

Dayvo is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2006, 07:06 PM   #2
MISTA FIESTA
Da Shifty One
 
MISTA FIESTA's Avatar
 
Join Date: Mar 2005
Location: Sydney
Posts: 1,586
Default

Hey Mate,

I used to have a KF auto and it also used to take ages to rev out 1st then it kinda shunts the car going into second.

I have no idea about the vacumn hose location.

Where was the kf purchased?? Sounds like it might have been mine?

Cheers

Damo
__________________
2013 Ford Fiesta ST - Frozen White - AU 0072/XXXX
- Mountune ST180 Intake Hose - Mountune Quick Shifter - J1 ST180 MAF Adapter - K&N Apollo CAI - Triple R Front Splitter - Richbrook Shorty Aerial - DMB Gel Overlays - LED Interior Bulb Upgrade -
MISTA FIESTA is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2006, 07:12 PM   #3
smally289
growing up is optional
 
smally289's Avatar
 
Join Date: Feb 2006
Location: Gawler area SA
Posts: 3,303
Default

The blocked off vac hose is normal. I think its actually a vent. Check the kickdown switch on the accel pedal, it should click when you floor it. The 1-2 shift on these is never going to be really smooth tho
smally289 is offline   Reply With Quote Multi-Quote with this Post
Old 15-09-2006, 09:30 PM   #4
Dayvo
Starter Motor
 
Join Date: Sep 2006
Posts: 11
Default

Thanks for the feedback guys , might put it in for an auto service and see what they have to say
Dayvo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:51 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL