Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 06-10-2006, 07:25 PM   #1
Peej
Regular Member
 
Join Date: Mar 2006
Posts: 86
Default Compression Ratio

Was just wondering if someone could make me understand what it means?

Peej is offline   Reply With Quote Multi-Quote with this Post
Old 06-10-2006, 07:34 PM   #2
Peej
Regular Member
 
Join Date: Mar 2006
Posts: 86
Default

The reason i ask is today i test drove the new swift sport. I must say it feels comfortable, nice engine tone etc. and dare i say it, apart from slighty stiffer suspension and slighty better clutch feel (well i think so).... it feels exactly the same as the fiesta, if not a bit more sluggish around lower RPM's. Im actually trying to see what the difference is in the hardware of each. But lets put it this way, unless the price of the newie is dropped a bit, fiesta all the way.
Peej is offline   Reply With Quote Multi-Quote with this Post
Old 07-10-2006, 01:39 AM   #3
Pieoter
FF.Com.Au Hardcore
 
Join Date: Jan 2005
Posts: 792
Default

Compression ratio that is quoted by the car makers is static compression ratio. Its the amount that the air inside the cylinder will be compressed by. In the Fiesta each cylinder has a capacity of 400cc and a compression ratio of 11.0:1 so the air will be squashed into the space of ~36cc. So you should be getting a pressure of 11bar in the cylinder.

The higher the compression ratio the more efficient the engine will be.
__________________
COLORADO RED FIESTA ZETEC
MODS - Window Tint, Bmc Panel Filter, Euro Plates, Ghia grill, Momo F16 leather gearknob, Momo Leather gearboot, WQ Zetec Front sway bar, WQ Zetec Sway bar links, WQ Zetec bushes.
ICE - Alpine CDA9827, MbQuart Reference 6.5inch splits, MbQuart Reference rears, Rockford Fosgate Punch Stage 3 12inch Sub, Rockford Fosgate P4004 + P3001.
Pieoter is offline   Reply With Quote Multi-Quote with this Post
Old 07-10-2006, 09:51 AM   #4
joshf2
striped
 
joshf2's Avatar
 
Join Date: Aug 2005
Location: Sydney
Posts: 656
Default

you'll also need to run a higher octane fuel, as with more compression, the higher likelyhood of detonation.
joshf2 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:20 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL