Hard to get bits Wanted or For Sale - Page 12

grumblexr6 · 12-09-2009, 09:29 AM

Gday guys I know you may think its not hard to find but im after complete inner door clips and rods for coupe not sure if they same as sedan but would have thought they will be someone may confirm for me but yea I cant seem to track anything down.
Thanx Jon

Scooter · 12-09-2009, 11:58 AM

Quote:

Originally Posted by grumblexr6

Gday guys I know you may think its not hard to find but im after complete inner door clips and rods for coupe not sure if they same as sedan but would have thought they will be someone may confirm for me but yea I cant seem to track anything down.
Thanx Jon

I would assume that they are the same for the locks, but if you are referring to for the inner door handles, I would think the coupe 1's would be longer?

Pinkbits · 12-09-2009, 08:03 PM

Quote:

Originally Posted by grumblexr6

Gday guys I know you may think its not hard to find but im after complete inner door clips and rods for coupe not sure if they same as sedan but would have thought they will be someone may confirm for me but yea I cant seem to track anything down.
Thanx Jon

Vertical rods should be the same or very similar. These can be bent slightly if needed.
Horizontal rods are longer and all clips are the same.

grumblexr6 · 13-09-2009, 12:19 PM

Thanks for the info guys now just need to find some.

JG65TE · 15-09-2009, 08:39 PM

i tried to use sedan door lock rods on my hardtop, they didnt like it, by the time you bend them to suit there isnt really enuf length to put the button properly. so at this stage i not got em and dont care right now , thats a later job

grumblexr6 · 16-09-2009, 07:22 AM

Hey Guys Im in need of the gaskets that go in front guard blinkers been told that cant buy new one's is this true and as there anything else can use or will I have to make my own. Also need driver side window devider clips to rear side window. Top windscreen mould too not to sure if sedan is same been told it should be though.
Thanks again Guys Jon

JG65TE · 16-09-2009, 08:57 AM

Thought rare spares had the indicator gaskets ? , glass dividers usually come up in pairs, anywhere from 100 bucks to 300+ ....top sedan windscreen mould is short by over a inch unfortunately.

grumblexr6 · 16-09-2009, 09:46 AM

Was in rare spares last week to pick up some stuff and while I was there I asked about the indicator gaskets and said sorry cant get them. You can almost build a XW/XY from rare spares but nothing for XC as they say there not on high demand at moment which is crap and finding it hard to get stuff I need

blower351 · 16-09-2009, 05:30 PM

hey fellas chassing alloy molding that goes around the vinyl top on the landau.

XCCobra351 · 04-10-2009, 10:05 PM

Hi, that makes two of us. It's a shame the vinyl roof mouldings are not being done repro for Landau's but I guess the demand is not there!

sydneysteve · 13-10-2009, 12:26 AM

Hi there people.....Im after a LANDAU Boot lock with the "L" still in place...I would appreciate any help in sourcing one..cheers!

JK1 · 14-10-2009, 01:05 PM

Hey fellas im after some 15" wheels - 15x10 and 15x8

Also a centre console for an XB
Cheers

Scooter · 14-10-2009, 09:40 PM

Hi, I am chasing some NOS Hella driving lights or lenses, 301-105-274. Anyone interseted in parting with a set? Willing to pay reasonable money.

Tha Jack · 15-10-2009, 10:11 AM

Gday Guys n Gals,
Ive got a set of near new Tyres for sale 295/50/15 DOMINATORS and 235/50/15
one has some damage to the tread due to scraping the guard. Done less than 500ks. I Dont recomend using them on the track though.

Im also after a set of rims 15 x 10s & 15 x 8s or even just a set of 15 x 8s to fit some track tyres to.

Cheers Jack

cob115 · 15-10-2009, 11:28 AM

[QUOTE=Tha Jack]Gday Guys n Gals,
Ive got a set of near new Tyres for sale 295/50/15 DOMINATORS and 235/50/15
one has some damage to the tread due to scraping the guard. Done less than 500ks. I Dont recomend using them on the track though.

Im also after a set of rims 15 x 10s & 15 x 8s or even just a set of 15 x 8s to fit some track

Hang on they would make top burn out tyres Jack :evil3: with your rim have you thought about getting a standard steel rim 15inch and getting a rim shop to turn in to 15x10s/12s? n get you magical 5.1/4 back space: )i done it with some old skool splats n they look horn

sydneysteve · 17-10-2009, 06:46 PM

would anyone out there have a wiring diagram for the power windows on the Landau,,,,,help would be much appreciated....cheers!!

Muzz Landau · 17-10-2009, 09:42 PM

Hi sydneysteve,
I can scan the wiring diagram for you if you like.
Post up your email address or PM it to me.
Cheers

Tha Jack · 20-10-2009, 10:14 PM

Hey Guys,
Im looking for a rear bumper to fit a coupe?
I"d prefer a chrome one but painted will do.

Cheers Jack

xe351 · 21-10-2009, 03:01 PM

i think a zf/zg fairlane rear bumper might also be the same as coupe?

Pinkbits · 21-10-2009, 06:57 PM

Quote:

Originally Posted by xe351

i think a zf/zg fairlane rear bumper might also be the same as coupe?

Negative.
XA sedan, XA & B coupe are the same
XC coupe is the same but with vertical slots to locate the bumper jack.

ZF/G & P5 rear bars are the same.

CJR09 · 26-10-2009, 09:42 AM

Hey guys, I need a xa white w/basketweave insert upholstery interior for my superbird.

I know I can get it at various gt shops but I have a xa fairmont burgundy upholstery in almost mint condition - one small wear mark on drivers seat piping that I would like to swap for

so if anyone knows of anything lying around somewhere hook us up!!

thanks in advance, cjr09

AMCE · 26-10-2009, 10:08 AM

WANTED - a set of wheels for my Cobra. Preferably V5 Simmons with deep dish - or otherwise aftermarket Globes.
Looking for 295 for the back - 16 or 15 inch rims.
If anyone has anything like this - or something similar - please let me know!!

AMCE · 28-10-2009, 10:20 AM

Base surround wanted for manual shifter. I am converting auto back to manual and need the base surround that sits inside the console. My God I cannot find one anywhere. Lost a bidding war on ebay for one recently and I can't even seem to to find repo's or NOS anywhere. Any advice appreciated.

XBCoupeNZ · 28-10-2009, 10:59 AM

Quote:

Originally Posted by Wild High

Base surround wanted for manual shifter. I am converting auto back to manual and need the base surround that sits inside the console. My God I cannot find one anywhere. Lost a bidding war on ebay for one recently and I can't even seem to to find repo's or NOS anywhere. Any advice appreciated.

Sorry - not really sure what part you mean.

Could it be one of these?

http://cgi.ebay.com.au/FORD-4-SPD-MA...item3ef9a405a0

XBCoupeNZ · 28-10-2009, 11:02 AM

http://cgi.ebay.com.au/ws/eBayISAPI....=STRK:MEWAX:IT

Hard to find item - thought I'd let you all know if you hadn't seen it.

I would dearly love it, as mine is no where near original - completely hacked to bits and needs rebuilding. Can't see him freighting it here though LOL

If anyone has a template or measurements for the back part of the parcel shelf, I'd be keen to get a copy of it.

AMCE · 28-10-2009, 04:19 PM

Thanks XBCoupeNZ. No I'm after the plastic/vinyl insert that flat sits inside the console and that the gear lever pokes through.
Or in other words the base of the gear shift boot.... its rectangular...
Hmmm - not sure the real name for it! Someone help?

CJR09 · 28-10-2009, 04:44 PM

Quote:

Originally Posted by Wild High

Thanks XBCoupeNZ. No I'm after the plastic/vinyl insert that flat sits inside the console and that the gear lever pokes through.
Or in other words the base of the gear shift boot.... its rectangular...
Hmmm - not sure the real name for it! Someone help?

hey wild high - is this what you're after?

AMCE · 29-10-2009, 02:47 PM

No I don't think so. I rang those guys and they reckon they don;t stock the item I'm after. I'm looking for the part that sits flat inside that piece itself... and which the gearlevel pokes through...

grumblexr6 · 29-10-2009, 04:22 PM

http://www.fordmuscleparts.com.au/sh...ducts/show/729 is this what you after but just in Black not woodgrain.

AMCE · 30-10-2009, 08:29 PM

YES!!!!!! Thats the one!! They call it a console insert. Yep = I want it black however and for a manual...
I'll check out their web site coz I never have ...
Mate - thanks boys!!!