Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 24-03-2014, 11:50 PM   #3811
dbridgy
Starter Motor
 
Join Date: Jan 2014
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Hi all.
Thought it was time I said g'day.
I've owned 2 fords now. The first was a 2002 BA XR6 N/A I bought when it was only 2 years old with 170,000km on the clock. It was an ex Telstra exec car. Lots of k's but I got it for a good price back then. I had it converted to gas & it was a great car. I sold it a year ago with 360,000k's on it & it was still going strong. I had seen a 2003 BA XR6 Turbo with only 90,000km & like new condition for $10,000 so I bought that & sold the old one. This one has a vapour injected gas system & it goes just as well on gas as on petrol. It so far has been a good car & I only hope it goes as well and for as long as the old one.
I was always a Holden man before these 2 Fords & many years ago I owned a VH Charger. I wish I still had that sitting in the shed!
It has been good to read these forums & getting other peoples opinions on different topics about their cars.
Cheers for now, Dave
dbridgy is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2014, 05:26 AM   #3812
sparra04
Regular Member
 
Join Date: Feb 2014
Location: newcastle
Posts: 44
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Territory TRP View Post
Hello I am new to this.
I have just purchased a 2013 Territory SZ TS 2.7 DT and would appreciate some advice regarding turbo timers, and the pros and cons of using sports mode in regard to looking after the engine and its service life. Having been a farmer always liked to see a diesel motor with a comfy load but not labouring all the time seemed to be economical this way and trouble free though they may lug through a heavy patch every so often.
Not sure if i am in the correct place to post this but shall give it a go and see what happens.
Thanks for reading this and look forward to any reply to steer me in the right direction.

Regards TRP
hi
turbo timers are designed to let the engine idle down for a pre determined time to allow continued oil flow
if your turbo bearings are hot and you take away oil flow suddenly you will eventually have bearing failure and ruin the turbo
its not a big issue if you are just idling around town but if you were cruising at 100 towing your trailer or van (or hooning around) your turbo works hard and needs to be cooled down before shutting off
I don't have one on the f6 yet so I sit and let it cool first b4 shutting it down
my diesel navara had one from new
__________________
PX ranger
sparra04 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 25-03-2014, 07:52 PM   #3813
rangerford
Starter Motor
 
Join Date: Mar 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

g,day everyone , I have a nice 99 au Fairmont which I love,clean as a whistle under the bonnet and running real good,but I have major issues in the rear suspension,i guess I have to keep on working on it but where do you start,looking forward to talking about cars,thanks keep the car between the ditchs.
rangerford is offline   Reply With Quote Multi-Quote with this Post
Old 26-03-2014, 01:40 PM   #3814
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Territory TRP View Post
Hello I am new to this.
I have just purchased a 2013 Territory SZ TS 2.7 DT and would appreciate some advice regarding turbo timers, and the pros and cons of using sports mode in regard to looking after the engine and its service life. Having been a farmer always liked to see a diesel motor with a comfy load but not labouring all the time seemed to be economical this way and trouble free though they may lug through a heavy patch every so often.
Not sure if i am in the correct place to post this but shall give it a go and see what happens.
Thanks for reading this and look forward to any reply to steer me in the right direction.

Regards TRP
Try asking in the Terry forum.... http://www.fordforums.com.au/forumdisplay.php?f=85
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2014, 09:36 PM   #3815
mkford
Starter Motor
 
Join Date: Mar 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi People! my name is Mike and own an old 93 XG Ute which I cannot part with so constantly repairing and keep driving! it recently took me to Darwin and back to Cairns!
I am now trying to buy some door locks for it and have been told they are the same as ED and they will fit (both being 93 models?)
Can someone please confirm with me if this is correct before I go spending big bucks on Ebay buying locks

Cheers,
Mike
mkford is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2014, 09:41 AM   #3816
hydro27
Starter Motor
 
Join Date: Mar 2014
Posts: 26
Default Re: Welcome to New Members - Post here to say gday!

G'day, New to this forum. I joined up to discuss and find out more about some old race gear that I have, Apparently quite rare. I also have a nice old truck 75 F100. Born into a ford family my first car was an XW ute, Had several F100's, Went through the XF/XG phase and an AU only to find I like my old truck the most for a daily driver . In the family we also have a XB couple done as a Drag car, And my ol man is doing a 75 F250 dual wheel which has a 6 litre Turbo Isuzu and a 6 speed. Anyhow I wanted to post up about the XE 192540 4 bolt GF Block I have, And also nice set of old alloy heads E2ZM 6090 A3.
For some reason I can not start a new thread so im not sure where the discussion goes from here but maybe someone can help me out. Cheers
hydro27 is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2014, 11:31 AM   #3817
paf
Starter Motor
 
Join Date: Feb 2014
Posts: 3
Default Re: Welcome to New Members - Post here to say gday!

hello, i have replaced my egas converter on my BF falcon and the car runs heaps better, but occasionally at freeway speeds it hesistates slightly.
paf is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2014, 04:20 PM   #3818
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by mkford View Post
Hi People! my name is Mike and own an old 93 XG Ute which I cannot part with so constantly repairing and keep driving! it recently took me to Darwin and back to Cairns!
I am now trying to buy some door locks for it and have been told they are the same as ED and they will fit (both being 93 models?)
Can someone please confirm with me if this is correct before I go spending big bucks on Ebay buying locks

Cheers,
Mike
Head over to either the X Series section http://www.fordforums.com.au/forumdisplay.php?f=86

or the Utes and Vans http://www.fordforums.com.au/forumdisplay.php?f=75
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2014, 08:56 PM   #3819
alan3103
Regular Member
 
Join Date: Nov 2013
Location: Cairns Queensland
Posts: 39
Talking Re: Welcome to New Members - Post here to say gday!

Gday peeps, im new to this site, i did have until last week a bmw cooper s, nice toy but a bit uncomfortable ! I have now got a winter white BA xt in really nice condition, i have already started to add extras to it, hope to learn more about how it ticks on here, once i get used to how this site works im sure i will add some pics, regards to all ,
alan3103 is offline   Reply With Quote Multi-Quote with this Post
Old 28-03-2014, 09:07 PM   #3820
Madaya
FF.Com.Au Hardcore
 
Madaya's Avatar
 
Join Date: Jul 2010
Location: Bunbury WA
Posts: 1,409
Default Re: Welcome to New Members - Post here to say gday!

Mate, you are in the right place. Immense wealth of knowledge here that you wont find in a book. Welcome.
__________________
2010 FG XR6 I6 CC Ute, Nitro colour. lsd, sports suspension, Ford 18's fitted with Michelin Primacy 3 ST 245x45x18, MW Quick Shifter, Pacemaker 4500 Extractors, Carbuilders Soundproofing, KPM Street Fighter CAI
Madaya is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 29-03-2014, 05:35 PM   #3821
hydro27
Starter Motor
 
Join Date: Mar 2014
Posts: 26
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by hydro27 View Post
G'day, New to this forum. I joined up to discuss and find out more about some old race gear that I have, Apparently quite rare. I also have a nice old truck 75 F100. Born into a ford family my first car was an XW ute, Had several F100's, Went through the XF/XG phase and an AU only to find I like my old truck the most for a daily driver . In the family we also have a XB couple done as a Drag car, And my ol man is doing a 75 F250 dual wheel which has a 6 litre Turbo Isuzu and a 6 speed. Anyhow I wanted to post up about the XE 192540 4 bolt GF Block I have, And also nice set of old alloy heads E2ZM 6090 A3.
For some reason I can not start a new thread so im not sure where the discussion goes from here but maybe someone can help me out. Cheers
Can anyone hear help out with this stuff
hydro27 is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2014, 09:11 PM   #3822
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by hydro27 View Post
Can anyone hear help out with this stuff
Which part do you need help with?
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 31-03-2014, 10:14 AM   #3823
echo007
Owner
 
Join Date: Mar 2014
Location: New Zealand
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hello all. Thanks for adding me to the forum. Safe driving.
echo007 is offline   Reply With Quote Multi-Quote with this Post
Old 31-03-2014, 11:26 PM   #3824
stamps351
Regular Member
 
Join Date: Feb 2014
Posts: 39
Default Re: Welcome to New Members - Post here to say gday!

Hi Guys i'm new to the forum, look forward to reading up on all the info you guys provide.

Just wondering i'm not sure how to start a new thread?

I wanted to ask about my throttle response sensor on my NL fairlane it has the 5L Windsor, it runs fine but maybe once a week on start up the revs jump around a bit at idle an once she warms up theres no dramas, the mechanic put the scanner on the computer an it came up with the throttle position sensor error..... have you guys had this problem? is it worth fixing at the moment (money is tight atm)

any info on this guys would be great cheers
stamps351 is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2014, 12:15 PM   #3825
Boyaki
Starter Motor
 
Join Date: Apr 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi all. Ive been driving fords for a while now and work on them my self. I have owned a few el ef. I had and XE ESP 6. I am currently driving an XG.
Thanks for letting me join. Cheers.
Boyaki is offline   Reply With Quote Multi-Quote with this Post
Old 01-04-2014, 05:40 PM   #3826
chak52
Starter Motor
 
Join Date: Apr 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

I drive a 1999 Ford AU Station. Drives like the day one after all the years. Love it and wouldn't change it for anything. Thank you for this great forum.
chak52 is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2014, 11:23 AM   #3827
Noober69
Starter Motor
 
Join Date: Mar 2014
Posts: 25
Default Re: Welcome to New Members - Post here to say gday!

Hi, I am seriously thinking about a 2013 Falcon FG Mk11 G6E EcoLPI for the wife after someone wrote off her 4wd. Need something large for the kids and country cruising, and 4wd's too expensive to run. My first ever car was a 1978 Ford Escort sedan 2L auto with vinyl roof. Classic. Hope any new Ford is as reliable.
Noober69 is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2014, 05:00 PM   #3828
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by stamps351 View Post
Hi Guys i'm new to the forum, look forward to reading up on all the info you guys provide.

Just wondering i'm not sure how to start a new thread?

I wanted to ask about my throttle response sensor on my NL fairlane it has the 5L Windsor, it runs fine but maybe once a week on start up the revs jump around a bit at idle an once she warms up theres no dramas, the mechanic put the scanner on the computer an it came up with the throttle position sensor error..... have you guys had this problem? is it worth fixing at the moment (money is tight atm)

any info on this guys would be great cheers
Go to Post Classic Forumhttp://www.fordforums.com.au/forumdisplay.php?f=29

Near the top of the page on the left hand side and just above the heading 'Threads in Forum' there's a button labelled 'New Thread' .
Click on that and you're away
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 05-04-2014, 01:50 PM   #3829
Naths1983
Starter Motor
 
Join Date: Apr 2014
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Hi there, I'm new to this, but could someone give me a little help as I am stumped. I have an 'AU ute 2000 model' on dedicated gas, that had been sitting for 2 weeks, went to start it and all I got was click click click battery is fine as I tried to jump start it with the Rav 4 and got the same thing, a rapid click click click. Bench tested the starter motor and it was dead as shown no sign of life when jumped. So put a new starter motor in but get the same thing click click click, yet when the keys are on and I jump the starter motor it will start. Swapped the starter relay around with other ones that are the same and still get the same response 'Click Click Click'!!! Can any one please help me?

Last edited by Naths1983; 05-04-2014 at 01:59 PM.
Naths1983 is offline   Reply With Quote Multi-Quote with this Post
Old 05-04-2014, 02:09 PM   #3830
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Naths1983 View Post
Hi there, I'm new to this, but could someone give me a little help as I am stumped. I have an 'AU ute 2000 model' on dedicated gas, that had been sitting for 2 weeks, went to start it and all I got was click click click battery is fine as I tried to jump start it with the Rav 4 and got the same thing, a rapid click click click. Bench tested the starter motor and it was dead as shown no sign of life when jumped. So put a new starter motor in but get the same thing click click click, yet when the keys are on and I jump the starter motor it will start. Swapped the starter relay around with other ones that are the same and still get the same response 'Click Click Click'!!! Can any one please help me?
Sounds like the battery might not be as fine as you think,how old is it?
The Rav battery might not have enough amps to do any good (especially if using elcheapo jumper leads).

I'd be taking the battery out and getting it tested.
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 05-04-2014, 10:56 PM   #3831
Naths1983
Starter Motor
 
Join Date: Apr 2014
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

The Rav starts the AU fine when I hot wire the solenoid on the starter motor, just won't start it when trying to start by the ignition just get the 'click click click'. And now that I have had the AU battery on a trickle charge for a few days it seems to be holding its charge as it will now start the ute but only when hot wire the starter motor.
Naths1983 is offline   Reply With Quote Multi-Quote with this Post
Old 07-04-2014, 09:57 PM   #3832
Roy Staker
Starter Motor
 
Join Date: Aug 2012
Posts: 7
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by russellw View Post
Howdy all Newbies!

Welcome to Fordforums.com.au

: : : : :

This is the place to introduce yourself and your ride, most of all enjoy your stay!

: : :nutsycuck : :
hi Russ
thanks for the warm ford welcome
I have 2 fords, EF future wagon & my NL fairlane (concorde)
both have ceramic pacemaker extractors
& I also have a 1977 C20 chev pick-up, with big wheels & a 327
this is a great site, its make great reading, & an excellent way to fix any problems, everyone loves to help
cheers - Roy
Roy Staker is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 10:59 AM   #3833
Ravenon
Raven
 
Ravenon's Avatar
 
Join Date: Mar 2014
Location: Auckland
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Hi All

Thanks for the add..

My names Raven I live in Auckland NZ and have a AUII XR8 ute..
Ravenon is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 11:42 AM   #3834
g hedges
Starter Motor
 
Join Date: Apr 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

G,day Guys
I,m Gary know as Gazza

Thanks for the welcome..
Just brought a 2009 fg xr6 lightning silver
34,000klms only

I would like to change the icc screen to colour
Have read a little about it on this site.
Do you know of anyone selling a colour screen to fit the above fg xr6 single climate in good condition (no scratches)

And any advice would be appreciated.
Thanking-you
g hedges is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 12:23 PM   #3835
KingFord29
Starter Motor
 
Join Date: Apr 2014
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Gday matty,

Call me A, I'm here for the love of Ranger. Ta, mate.
KingFord29 is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 12:52 PM   #3836
lockett351
Starter Motor
 
Join Date: Apr 2014
Location: tasmania
Posts: 15
Wink Re: Welcome to New Members - Post here to say gday!

Hi everyone tony is my name and I have a 351w in a xe falcon.
lockett351 is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 11:17 PM   #3837
kcee
Regular Member
 
Join Date: Mar 2014
Posts: 114
Default Re: Welcome to New Members - Post here to say gday!

Hi all, been stalking the threads for a while.
Have owned and driven Ford's in the past but nothing newer than the good old xc.
Hopefully in a few weeks will own either an bf or fg xr8 or GS/super pursuit.

Till ron.
kcee is offline   Reply With Quote Multi-Quote with this Post
Old 09-04-2014, 11:56 PM   #3838
harjoy
Starter Motor
 
Join Date: Apr 2014
Posts: 1
Smile Re: Welcome to New Members - Post here to say gday!


Hi folks, my name is Harry. My present ride is 2005 BA Ser 11 RVT Ute. I hope to be able to share some good news stories in the future. I am brand new to this forum thing, so if I do something wrong, it is not intentional. After all I am 66 years old so what would you expect. Have fun and thanks for the invitation.

Harry.
harjoy is offline   Reply With Quote Multi-Quote with this Post
Old 10-04-2014, 12:16 AM   #3839
dav
Starter Motor
 
Join Date: Feb 2012
Posts: 10
Default Re: Welcome to New Members - Post here to say gday!

G'day to everyone, been visiting this site for quite sometime so I thought its about time to say hi. I'm restoring a September 73 built xa gt coupe,wild violet with white interior, it will be a slow build being a full nut and bolt resto, just like to say how amazing and inspirational you guys are and I'm hoping I can replicate some of the work I've see at the forum
Cheers Dav (Mick)
dav is offline   Reply With Quote Multi-Quote with this Post
Old 10-04-2014, 09:35 AM   #3840
.JP.
knowledge is power
 
Join Date: Apr 2014
Location: melbourne
Posts: 3
Default Re: Welcome to New Members - Post here to say gday!

G'day all been on this site for a little while now and i dont know how to start a new thread or ask a question so i will ask my question now and hope it gets across and doesnt upset anyone... I HAVE A 1998 AU WAGON AFTER SITTING OVER NIGHT OR FOR A DAY OR 2 IT HAS TROUBLES STARTING IT JUST COUGHS AND FARTS THEN STALLS THEN I TRY AGAIN STRAIGHT AWAY AND IT BARKS STRAIGHT INTO LIFE I HAVE NEW PLUGS AND GOOD FUEL IN IT AND AIR CLEANER AND OIL BUT STILL NO LUCK ON STARTING IT FIRST GO AFTER SITTING FOR A DAY OR SO IVE ALSO CLEANED INTAKE AND ICV... IF ANYONE CAN HELP WITH ADVICE IT WOULD BE HIGHLY APPRECIATED AS IM AT WITTS END AND CONSIDERING TAKING TO FORD AND HOCKING MY LEFT NUT FOR HELP
.JP. is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:56 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL