Wheels That Fit Brembo Brakes

[Professor Farnsworth]

And I've been chasing a good condition set for weeks, no joy.

[ivanflo]

http://www.stgeorgetyres.com.au/pack...ct-detail.aspx

I was in the market for staggered 18 inch wheels and...
Apparently these 17 inch wheels clear Brembo's?

I believe them to be XXR 550's, anyone had any experience with XXR?

[HI PSI]

Matt from Race Brakes Sydney is currently investigating modifying a rotor hub and brackets, so that I can fit Brembo's behind normal wheels. I'll keep you posted on further developments.

[FLOORED]

Originally Posted by HI PSI

Matt from Race Brakes Sydney is currently investigating modifying a rotor hub and brackets, so that I can fit Brembo's behind normal wheels. I'll keep you posted on further developments.

The rotor is a two piece option and will run bobbins (which are being manufactured) and just waiting on them to proceed.

[Kezz1]

Originally Posted by kboot6

These are lenso d1r I got fitted today
front 18x9 +15. 245/40
Rear 18x10 +22. 265/35
They fit over 4 pot brakes.
Its standard fpv height and the rears are rubbing on the guard lip so i might have to get them rolled and the fronts i might change to 235 if i can get enough rolled on the front.

Bit of a thread mine here.....

Kboot 6 - out of interest, how much space do the D1R's have between the wheel and caliper up front over the 4 pots?

[08G63T]

Would someone know if the following wheels will fit over 6pot brembos?

- Lenso Speed 2 in 19X8.5 Front and 19X9.5 Rear with P35 or P40 offset
- XXR 527 in 19X8.75" Front and 19X9.75" Rear with P38 offset

I'm going to assume guards will need to be rolled

[Sunburst XR50T]

Guys I'm wondering if anyone knows if 19" XR50 Turbo wheels will fit over the 6 pot Brembos? Or anyone in Sydney with 6 pots that I could see if my wheel fits over?

Cheers.

[irvinnie]

50th anniversary rims won't fit over brembos. I had to change rims on my ute when I fitted 4 pot brembos

[SIRGTP]

Koya SF06...

20x9.5 front +22 clear easily over 6 pots and 20x11 +37 rear just clear rear 4 pots...

[Six6]

Can anyone confirm if Vertini Drift 19" x 8.5 +30 fit over 6 Piston brembo brakes? I can confirm that +25 do.

[FLOORED]

Originally Posted by Six6

Can anyone confirm if Vertini Drift 19" x 8.5 +30 fit over 6 Piston brembo brakes? I can confirm that +25 do.

Most suppliers will generally be able to tell you if that helps.

[Six6]

Thanks for the reply FLOORED. I have tried getting in contact with them but they are unable to confirm if they will fit. But confirm that +25 will

[FLOORED]

Originally Posted by Six6

Thanks for the reply FLOORED. I have tried getting in contact with them but they are unable to confirm if they will fit. But confirm that +25 will

If you have 90mm clearance between the outer rotor face to the inner face of the spoke then they generally fit we don't work off the offset as the spoke can still foul.

[Six6]

Thanks again FLOORED. Unfortunately It looks like it goes from 93mm to 88mm from the outer side of the spoke down to the hub side.

[FLOORED]

Originally Posted by Six6

Thanks again FLOORED. Unfortunately It looks like it goes from 93mm to 88mm from the outer side of the spoke down to the hub side.

This may still be enough for you and i would suggest if you can get a Ford with either 4 or 6 front Brembo's on you could check your wheel for clearance.

[HI PSI]

Originally Posted by Six6

Can anyone confirm if Vertini Drift 19" x 8.5 +30 fit over 6 Piston brembo brakes? I can confirm that +25 do.

Let us know how you go with it. I am sure that other will be interested.

[perthfggsute]

Hi fella's
I recently received Speedy Hotshot wheels from Autocraze (great people to deal with )
The wheels i went for are 19 x 8.5 all around with 245/35/19 rubber on the front and 255/35/19 rubber on the rear.the offset is +30 and they comfortably cleared my 6 spot brembo calipers and discs in front ( i am running standard Ford/FPV brakes in the rear ), the vehicle is a december 2010 FPV GS 315 ute

[marcyeo]

20170930_164445 by Gerald Yeo, on Flickr

20170930_164511 by Gerald Yeo, on Flickr

20170930_143634 by Gerald Yeo, on Flickr

TSW Nurburgrings in Matte gold. 20 x 8.5 +20 fronts and 20 x 10 +40 rear's.

Clear Brembo's with heaps of room!! Thanks Matt!

[JC]

Inovit Force5 19 x 8.5, P35 offset will also clear brembos:

[WyldOne]

Hey all,

Just curious will these rims fit over rear Brembo’s. Thank you in advance

[raised by monkeys]

Vertini Hellfire F20x8.5 +30 R20x10 +40
Front will fit 6p not sure about rears, not much room between the caliper to the inside of the wheel. I did ask for these to be cut to suit front brake upgrade.

[IMG][/IMG]

[FLOORED]

Originally Posted by WyldOne

Hey all,

Just curious will these rims fit over rear Brembo’s. Thank you in advance

Being 17" and the dish in them i doubt they will but the manufacture should be able to tell you once they know the model they are being fitted too.

[WyldOne]

Thank you mate ☺️

What about 17” Simmons FR with the correct offset.

[FLOORED]

Originally Posted by WyldOne

Thank you mate ☺️

What about 17” Simmons FR with the correct offset.

Your best bet is to ask the Simmons supplier which wheels will fit factory FPV brakes as they should have that info. Dished wheels generally wont allow bigger brakes.

[HI PSI]

I did a mod to my brakes, the rotor and caliper sit 10.4mm further inboard. Then purchased a set of BBS CH rims, that would have fit anyway...

[WyldOne]

Anyone know if a +40 pos on the rear will clear Brembo’s? Thank you

[arronm]

Yes, but depends on spoke design.

[WyldOne]

I forgot to add Simmons FR

[arronm]

Call tempe tyres, they are simmons.

[WyldOne]

Anyone know if BF XR6 17” rims clear rear Brembo’s? Thanks