TRP Racing Ford Falcon XR6T runs 9.1@159mph, update 8.48@165mph. - Page 14

Giant · 22-10-2012, 10:25 AM

Build the barra so you can pump 83 pounds into it hehehe.

prasac · 22-10-2012, 10:48 AM

Quote:

Originally Posted by Giant

Build the barra so you can pump 83 pounds into it hehehe.

filled block might get there, the GAS 2JZ's (3.4L Stroker) are pumping around 70psi.

Spiro made 1850hp with the methanol tune on 45psi or so, with the de-stroked Barra, not sure what the Barra blocks are good for.

prasac · 22-10-2012, 10:49 AM

think Wilshire only went 198mph, Mick's Motorsport went 197mph.

Giant · 22-10-2012, 11:15 AM

The commentors where very excited when it broke 200mph as they just finished saying they didnt expect it to break 200mph with the high temps. I think they said something about wheel shake helping wheel speed carrying threw to the top end MPH.

Giant · 22-10-2012, 11:37 AM

What do you guys use for driver cooling in the car?

prasac · 22-10-2012, 12:28 PM

Quote:

Originally Posted by Giant

What do you guys use for driver cooling in the car?

driver cooling what's that?

most guys i know don't use anything, i'm just going to get fans and try and find the coolest race suit i can. i have seen other guys run cold air in helmet or have ice packs in suit, but those guys are not really sportsman racers, they are big $ teams.

Giant · 22-10-2012, 12:38 PM

Its all good most times, just 38 degrees and stuck due to someone visiting the sandpit it starts to take its toll.

prasac · 22-10-2012, 12:41 PM

imagine if you were in a race suit, or race suit the nomex underwear

Giant · 22-10-2012, 01:36 PM

Yeah I saw a few guys that where ringing wet in sweat pealing off the race suits, always someone worse off but that falls to help me lmfao.

CYC06T · 22-10-2012, 09:17 PM

Quote:

Originally Posted by prasac

filled block might get there, the GAS 2JZ's (3.4L Stroker) are pumping around 70psi.

Spiro made 1850hp with the methanol tune on 45psi or so, with the de-stroked Barra, not sure what the Barra blocks are good for.

I have my block filled. As a precaution. We are only running about 42pounds for now, but haven't had a clean pass on that boost yet. I am looking forward to seeing where it gets us. Block has been strong with no problems so far.

prasac · 23-10-2012, 08:45 AM

Quote:

Originally Posted by CYC06T

I have my block filled. As a precaution. We are only running about 42pounds for now, but haven't had a clean pass on that boost yet. I am looking forward to seeing where it gets us. Block has been strong with no problems so far.

will you have it ready for the APSA meeting 24th November?

CYC06T · 31-10-2012, 08:22 PM

Quote:

Originally Posted by prasac

will you have it ready for the APSA meeting 24th November?

I'm not sure. It's possible just depends on how quick a few things get made. Will keep you posted on how we are tracking.

How far off is your ride from making its debut?

prasac · 31-10-2012, 09:46 PM

Quote:

Originally Posted by CYC06T

I'm not sure. It's possible just depends on how quick a few things get made. Will keep you posted on how we are tracking.

How far off is your ride from making its debut?

sweet as, hope it all goes smooth

CYC06T · 31-10-2012, 10:04 PM

Quote:

Originally Posted by prasac

sweet as, hope it all goes smooth

That's all you can really hope for. I am off to the states for 10 days for work next week so will hope for some good progress when I get back!

After pitting for the eclipse I am getting very they to be back on the track...

prasac · 01-11-2012, 07:49 AM

makes 2 of us, we are upgrading the gearbox for the Capri for the new 1UZ incarnation, waiting on parts to arrive and Norm is at SEMA

my car is in the paint shop awaiting a lick of paint and then it's last checks and out to have a little hit

CYC06T · 01-11-2012, 09:46 AM

Quote:

Originally Posted by prasac

makes 2 of us, we are upgrading the gearbox for the Capri for the new 1UZ incarnation, waiting on parts to arrive and Norm is at SEMA

my car is in the paint shop awaiting a lick of paint and then it's last checks and out to have a little hit

Nice - I saw some pics of it at the paint shop on fullboost.

The wait can be killer, but patience is a virtue as they say and I am sure it will be worth it. Getting away for work is kinda handy timing as it will keep me busy!

prasac · 01-11-2012, 10:23 AM

Quote:

Originally Posted by CYC06T

Nice - I saw some pics of it at the paint shop on fullboost.

The wait can be killer, but patience is a virtue as they say and I am sure it will be worth it. Getting away for work is kinda handy timing as it will keep me busy!

abscence makes the heart grow fonder

allmtr · 08-03-2013, 09:49 PM

Any updates on this car?

CYC06T · 08-03-2013, 10:03 PM

Quote:

Originally Posted by allmtr

Any updates on this car?

Yeah mate - a new lighter and more powerful version will be arriving by the Nationals in a couple of weeks. Then out for Jambo.

Motors going back in this weekend with a new combo and freshened up with a few more shiny billet bits.

Looking forward to getting back into the groove.

CYC06T · 08-03-2013, 10:08 PM

image.jpg

T4ME · 08-03-2013, 10:13 PM

Electric water pump or is that a blank off just whilst sitting in workshop?

CYC06T · 08-03-2013, 10:53 PM

Quote:

Originally Posted by T4ME

Electric water pump or is that a blank off just whilst sitting in workshop?

Electric

prasac · 09-03-2013, 10:34 AM

looking forward to version 2.0, gonna be some heavy hitting Falcon's out there playing, it's fantastic to see.

Giant · 09-03-2013, 01:37 PM

Looking forward to seeing the beast run at Jambo.

T4ME · 09-03-2013, 01:57 PM

Quote:

Originally Posted by CYC06T

Electric

Who sells these mate as I was rapt with the way one properly set up can bring temps down when back at the pits on some of my other cars.

Bonus of some added torque to I guess

CYC06T · 10-03-2013, 04:17 PM

Quote:

Originally Posted by prasac

looking forward to version 2.0, gonna be some heavy hitting Falcon's out there playing, it's fantastic to see.

You and me both Paulie. The boys fired t up last night. The new combo looks good and sounds pretty tasty.

Will be interesting to see what the GTX goes like.

Hopefully some dyno time this week. It may make it out to FTF this week. Unfortunately I have family commitments so I've said the boys can give it a shakedown if its ready so we have an idea of what's possible at the nationals. We need some track time before Jambo.

SNB05T · 10-03-2013, 08:57 PM

looking good phill.
hopefully we'll see it run on friday night (we're going out for a skid)

Giant · 05-04-2013, 09:49 PM

Is the black beast ready for jambo

CYC06T · 07-04-2013, 08:10 PM

Quote:

Originally Posted by Giant

Is the black beast ready for jambo

Yeah was ready for Jambo. Unfortunately with it getn cancelled on Saturday I had things already committed to for Sunday so missed out.

Will be out for track championships next Saturday and test n tune on the 27th. Lookn forward to it!

prasac · 08-04-2013, 02:36 PM

Quote:

Originally Posted by CYC06T

Yeah was ready for Jambo. Unfortunately with it getn cancelled on Saturday I had things already committed to for Sunday so missed out.

Will be out for track championships next Saturday and test n tune on the 27th. Lookn forward to it!

car looked primed for action on Saturday shame it got rained out, was good to meet ya n have a chat.