Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 04-11-2015, 11:46 PM   #4711
Eck
Starter Motor
 
Join Date: Nov 2015
Posts: 5
Default Re: Welcome to New Members - Post here to say gday!

Hi, I am new to the forum, i am in the process of trying to put el tickford 4.0L into xh ute . All seems to fit , but runs like a hairy goat. Do i need cpu from original vehicle to run this engine ?
Eck is offline   Reply With Quote Multi-Quote with this Post
Old 04-11-2015, 11:51 PM   #4712
Eck
Starter Motor
 
Join Date: Nov 2015
Posts: 5
Default Re: Welcome to New Members - Post here to say gday!

Hi, I am new to the forum, i am in the process of trying to put el tickford 4.0L into xh ute . All seems to fit , but runs like a hairy goat. Do i need cpu from original vehicle to run this engine ?
Eck is offline   Reply With Quote Multi-Quote with this Post
Old 06-11-2015, 08:48 PM   #4713
bighoss
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

hi i just joined this site today i find this site to be very good anything related to ford cars ,, ive just purchased a ba mk2 xr6 love it ,, lol , i have a query im, wanting to replace my six stacker cd unit , to a single cd unit , as the 6 stacker cd unit is kaput ,, would it be compatable any ideas please ,,, cheers big hoss
bighoss is offline   Reply With Quote Multi-Quote with this Post
Old 07-11-2015, 10:20 AM   #4714
tdyxr
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default New member Hi all!!

Hi guys and girls,

My name is James joined up to aff for info and right ups on all ford things.
I own a Manual BA mkII xr6 with just a couple minor bolt on mods. Pic will explain my user name

Looking forward for car chat

James
Attached Images
File Type: jpg image.jpg (91.0 KB, 18 views)
tdyxr is offline   Reply With Quote Multi-Quote with this Post
Old 07-11-2015, 11:41 AM   #4715
fg g6et
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi all my names brendan an 23 and have a 2011 g6et
fg g6et is offline   Reply With Quote Multi-Quote with this Post
Old 10-11-2015, 09:53 AM   #4716
Waddles
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Thanks for the welcome.

My name is Glenn and I am running a black 2010 FG Falcon XR50.

Looking forward to reading some posts.
Waddles is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2015, 12:20 PM   #4717
wade79
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi thanks for welcome my name is Wade and i have a BA xr8 which i am currently doing some big mods on.
wade79 is offline   Reply With Quote Multi-Quote with this Post
Old 12-11-2015, 06:09 PM   #4718
BFGasUte
Banned
 
Join Date: Nov 2015
Posts: 158
Default Re: Welcome to New Members - Post here to say gday!

Hello Ford lovers,

My name says it all, I was a member many years ago, but my HDD crashed with my log-in details. Nice to see that other brands are not hated here. My GF has an XR6 I got her, a BA in Citric Acid. Bright colour ? It was hit in a car-park the first day. I look forward to reading more good stuff.

Regards Chris
BFGasUte is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 13-11-2015, 03:01 PM   #4719
347xhFTW
Starter Motor
 
Join Date: Nov 2015
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

G'day I'm Jason , got 2 xh xr8s blue 98 manual running 347cu,onnet bulge, body kit, fuel cap and tarp holes deleted and rear cab wall modified into super cap
Green 98 auto, turbo build in progress!
Look forward to reading all the threads on here
347xhFTW is offline   Reply With Quote Multi-Quote with this Post
Old 16-11-2015, 09:07 AM   #4720
SamJNR
Starter Motor
 
Join Date: Nov 2015
Posts: 3
Default Re: Welcome to New Members - Post here to say gday!

GDay guys. Hope everyone is doin well. Name is Sam im 28 and a Ford Fanatic. Ive got a FG XR8 Ute manual and love it. Just a few upgrades on it for now n still goin, in saying that, opinions and ideas are most welcome at any time and im also more than interested in meeting Fanatics like myself around melbourne who do gather ups and discuss/work with the cars. Thats enough from me for now and lookin forward to chatting. Thank u. Sam.
SamJNR is offline   Reply With Quote Multi-Quote with this Post
Old 16-11-2015, 05:48 PM   #4721
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Hi All I am Maurice Donovan from Allautos Advanced Tuning @ Geebung Brisabne wwwallautos.com.au
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 03:38 PM   #4722
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Hi there i am a reasonably car savvy chick in regional qld with a 93 eb II falcon which i am currently having to do some work to thanx to some "lovely" friends.....one of those things to do is change over the ignition barrel which i am having a little bit of trouble working out based on what i have been reading online....if anyone can help specially with pics i will b forever grateful.....cheers and thanx
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 03:44 PM   #4723
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by 93 ebie View Post
Hi there i am a reasonably car savvy chick in regional qld with a 93 eb II falcon which i am currently having to do some work to thanx to some "lovely" friends.....one of those things to do is change over the ignition barrel which i am having a little bit of trouble working out based on what i have been reading online....if anyone can help specially with pics i will b forever grateful.....cheers and thanx
Have a look, or ask, in the 'Post Classic' section. Most of the E series people are there.


http://www.fordforums.com.au/forumdisplay.php?f=29
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 04:29 PM   #4724
Tonyz
Starter Motor
 
Join Date: Oct 2015
Posts: 4
Cool Re: Welcome to New Members - Post here to say gday!

Hi thanks for the welcome,
I had a bit of a mental attack a couple of months ago, when I decided to transform my 6 cylinder AU ute into a V8 AU fairlane ute complete body and interior. Hence my mental attack I've got a AU1 fairlane and AU3 ute ,not all parts interchange. I'm getting there there are a lot more trying times ahead.
This forum has helped me a lot so far THANKS.
I will post some progress pic's once I work out how.
Tonyz is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 05:38 PM   #4725
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by 93 ebie View Post
Hi there i am a reasonably car savvy chick in regional qld with a 93 eb II falcon which i am currently having to do some work to thanx to some "lovely" friends.....one of those things to do is change over the ignition barrel which i am having a little bit of trouble working out based on what i have been reading online....if anyone can help specially with pics i will b forever grateful.....cheers and thanx
Changing an ignition barrel is usually a simple job, you have to insert the ignition key and select accessories and there is a pin you need to push in on the outer housing to realise the key and barrel. It has been some time since I have done one so I forget the exact position of the pin but to a trained eye it is easy to find. The biggest issue is you will have to link the new key and to do that you will need a scan tool.
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 05:55 PM   #4726
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

I think i have located the pin....on left side behind steering wheel??....but hard as i try to push it it doesnt seem to budge....do i need to take wheel off??
Cheers
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 06:15 PM   #4727
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by 93 ebie View Post
I think i have located the pin....on left side behind steering wheel??....but hard as i try to push it it doesnt seem to budge....do i need to take wheel off??
Cheers
No need to remove the wheel, do you have the ignition key in and turned to accessories. If it is not on accessories you will not be able to push in the pin.
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 07:17 PM   #4728
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Yes i have tried on both the first and second accessory places but still no luck.....its like the pin is jammed or something....
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 07:31 PM   #4729
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by 93 ebie View Post
Yes i have tried on both the first and second accessory places but still no luck.....its like the pin is jammed or something....
Have you tried wriggling the barrel while in the accessory position and pushing the pin at the same time?
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 07:36 PM   #4730
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Allautos View Post
Have you tried wriggling the barrel while in the accessory position and pushing the pin at the same time?
http://www.justanswer.com/ford/47if0...html#re.v/326/
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 07:44 PM   #4731
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Yep.....over and over again....wont budge....might have to find someone with cold chisel and take of the whole thing...
Cheers
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 07:48 PM   #4732
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Thanx for link....that is the pin i found but it just wont depress properly....i will try again once wheel is off the parts car
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 08:52 PM   #4733
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by 93 ebie View Post
Yep.....over and over again....wont budge....might have to find someone with cold chisel and take of the whole thing...
Cheers
If you are doing it right it should come out, maybe you need to drill a hole in the side of the key barrel and screw in a decent slid hammer and force it out, otherwise go to the wreckers and buy a complete ignition assembly and unscrew the sheer bolts with pin punch and hammer and replace the lot.
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 17-11-2015, 09:07 PM   #4734
93 ebie
Starter Motor
 
Join Date: Nov 2015
Posts: 9
Default Re: Welcome to New Members - Post here to say gday!

Thanx i will c what happens tomorrow then go from there...thankyou for your help..
Cheers
93 ebie is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2015, 05:32 PM   #4735
Megs74
Starter Motor
 
Join Date: Nov 2015
Posts: 4
Cool Re: Welcome to New Members - Post here to say gday!

Hey, I'm a 2012 diesel awd territory owner. Done 74000km and already had a $610 wheel bearing job done and now have a steering sensor fault causing problems. Any other owners experiencing problems? Trust it to be all out of warranty!
Megs74 is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2015, 05:36 PM   #4736
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Megs74 View Post
Hey, I'm a 2012 diesel awd territory owner. Done 74000km and already had a $610 wheel bearing job done and now have a steering sensor fault causing problems. Any other owners experiencing problems? Trust it to be all out of warranty!
What sort of problem? is your MIL on (Malfunction Indicator Lamp) on? do you have a fault code? has this only just happened after you had the wheel bearing job done?
Allautos is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2015, 06:16 PM   #4737
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

This area is primarily for new members introducing themselves to AFF.

Whilst it is always great to see members getting advice, any discussion re problems should really be done in the correct forum or via PM.
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 18-11-2015, 10:28 PM   #4738
Allautos
Starter Motor
 
Join Date: Mar 2014
Posts: 8
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by GasOLane View Post
This area is primarily for new members introducing themselves to AFF.

Whilst it is always great to see members getting advice, any discussion re problems should really be done in the correct forum or via PM.
Sorry I am new to this I was just following the flow, I never asked the questions, in way of introduction, I am a senior Technician, Technical Adviser for The Automotive Technician (TaT) a technical association for automotive technicians. I own and operate a independent automotive workshop in Brisbane. That's enough info I will but out now, thank you all

Regards

Maurice Donovan
Allautos is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-11-2015, 10:45 PM   #4739
Megs74
Starter Motor
 
Join Date: Nov 2015
Posts: 4
Default Re: Welcome to New Members - Post here to say gday!

Thankyou gasolane. I appreciate your effort, I'll post on forum. I'm new to this too!
Megs74 is offline   Reply With Quote Multi-Quote with this Post
Old 19-11-2015, 09:37 AM   #4740
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Megs and Allautos, no problem, it's just to save clogging this thread.

You'll probably find lots of information in the 'Post classic' forum http://www.fordforums.com.au/forumdisplay.php?f=29 for your EB

And I'm sure that Allauto's knowledge will be appreciated in any number of forums in here.
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL