Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > The Bar

The Bar For non Automotive Related Chat

Reply
 
Thread Tools Display Modes
Old 04-08-2016, 09:33 AM   #5101
munron
Starter Motor
 
Join Date: Aug 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

New here and just a standard Ford owner of a BA wagon and a BF XR6 ute.
Need the Forum for general repair tips.
Spent 3 hours trying to trouble shoot a jammed drivers seat on the XR6 ute. Would not slide forward. Was within 10 minutes of removing the whole seat and tracks... then I spotted it... the 50c coin wedged at the left hand rear track ! Had to manufacture a 'hooked' stiff wire to yank it out.
BEWARE 50c pieces if you have the XR6 UTE !

Does anyone know of any tonneau aftermarket supports that will stop the inevitable pooling of rainwater fwd and aft of the transverse supports.

XR6 ute Auto Trans cable ball and socket... What genious designed this ?? A nylon socket ! Wired it up to get going with cable ties and then picture framing wire.
Final fix .. drilled out the ball and put a bolt and washers through it. Probably cheaper in the manufacturing than the stupid ball and nylon socket.

XR6 ute light stalk .. internal wiring frayed. Hardly surprising .. seems to have been manufactured to save 2mm of additional micro wiring in the stalk. Pulled apart 'tiny'extra wire soldered in other wise $200 for new stalk,


BA wagon .. spend my life hitting the right rear panel to get the right rear brake light working !
Munro Nichols Brisbane
munron is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2016, 05:09 PM   #5102
Woz Bruv
Starter Motor
 
Join Date: Jul 2016
Posts: 5
Default Re: Welcome to New Members - Post here to say gday!

Hello m8s,
I just moved to Australia from Spain a few weeks ago (I'm English and had been living in Ibiza, Spain for over8 years).
My wife and I have just bought a 2013 Focus as our best car and 2006 Fiesta Zetec Sport for me to get to work in. Both seem like pretty good cars so far.
I've owned various fords over the years and recently had to scrap a Transit tipper when we were in Spain because it was too old to bother doing it up to sell before coming to Australia. It was sad to wave goodbye to the old workhorse.
I thought I would join now in case I need any advice in the future. Got a few useful tips on the UK Transit website in the past so I'm hoping for the same kind of thing here.
Btw, I am absolutely loving Australia so far. I think it's the greatest country on earth.
Woz Bruv is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 06-08-2016, 05:29 PM   #5103
Nathan73
Starter Motor
 
Join Date: Jul 2015
Posts: 19
Default Re: Welcome to New Members - Post here to say gday!

I lived in London for 10 years so understand your car choice, but in Oz mate have a crack at a V8 😊 welcome
Nathan73 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 06-08-2016, 06:07 PM   #5104
Woz Bruv
Starter Motor
 
Join Date: Jul 2016
Posts: 5
Default Re: Welcome to New Members - Post here to say gday!

Maybe in the future. This move has cost us a fortune so we just wanted a couple of small reliable cars to get us started, m8
Woz Bruv is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 10-08-2016, 09:27 AM   #5105
fairing
Starter Motor
 
Join Date: Aug 2016
Posts: 4
Thumbs up Re: Welcome to New Members - Post here to say gday!

Good Day all,
I am in Hervey Bay Qld.
I had for over 15 years a FORD EF.. reliable, comfortable, parts easy to get and just what I (now 75 yrs old) like - the style, the fuel consumption, parts easy to get and the car to service is cheap. Why FORD has been unable to sell the cars I find hard to understand.
The EF needed quite a few parts to put it in good condition again. I found a 1994 Falcon Ghia Fairmont with 144 K Km on the clock - it was cheaper to buy then the parts needed for the EF.
After a good clean up and claying the car it looks nice again. I have been driving for many month to relocate cars for AVIS and most of them late models.
The Fairmont I would prefer over any of them.
I am now replacing all sensors and the thermostat. The car drives well - but suddenly It does not want to idle - stays at 1200 rpm. Shut it of and restart =all good. I have another CPU - same thing.
I found a fault code reader in the UK (I bought two:-) and am waiting to scan it.
Still waiting for parts - Australia Post - 12 days now to get the thermostat fro MEL to H-Bay !! Anybody wants a fault code reader? Only for Ford EEC-IV !
fairing is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 10-08-2016, 10:14 AM   #5106
madfab
Starter Motor
 
Join Date: Aug 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi just joined looks like some good early falcon stuff look forward to checking it all out. This is my XM pretty stock apart from lowered and mooneys.
Attached Images
File Type: jpg IMAG0051.jpg (148.1 KB, 15 views)
madfab is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 14-08-2016, 12:24 AM   #5107
Jarrad88
Starter Motor
 
Join Date: Jan 2015
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Hi guys just rejoined the ford family with a xr6t ute
Jarrad88 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 17-08-2016, 06:02 PM   #5108
Apw
Starter Motor
 
Join Date: Jun 2016
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Hey guys. Recently acquired an fg na xr6 in that wicked green until i get off my p's. So far i am very happy with it, particularly shifting up the gears entering a freeway getting up to speed. Nothing over the speed limit of course!
Apw is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2016, 08:10 PM   #5109
Captain Risky
Starter Motor
 
Join Date: Aug 2016
Location: SE QLD
Posts: 11
Default Re: Welcome to New Members - Post here to say gday!

Gday my names Captain Risky (aka Jes), I live in QLD. In case your wondering I chose the name because about 6 different people swear I am that dude in real life . I have loved lots of cars but have never owned a ford. Recently I bought this. Its an XA fairmont with 302 and auto. Im in love with it BIGTIME!!!
Id been looking for about 2 years but with coupe prices going nuts recently I decided to get one while I could. I actually have another project car to finish first so dont expect a full restoration immediately.
Also I know bugger all about fords so go easy on me please! Anyhow very proud to finally have one of these beasts and meet with like minded car people,

Captain Risky
Captain Risky is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-08-2016, 06:33 PM   #5110
bafalconute
Starter Motor
 
Join Date: Jul 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hello & Thank You for the warm welcome.
Regards,
bafalconute
bafalconute is offline   Reply With Quote Multi-Quote with this Post
Old 24-08-2016, 04:14 PM   #5111
radford
Starter Motor
 
Join Date: Jul 2016
Posts: 1
Default Re: Hello First Time Poster- xw owner

Hello to all, this is my latest acquisition, 1970 xw panel van/ambulance.
Attached Images
File Type: jpg IMG_20160717_081342.jpg (66.0 KB, 5 views)
File Type: jpg IMG_20160717_170900.jpg (49.4 KB, 5 views)
File Type: jpg IMG_20160722_170637.jpg (49.9 KB, 5 views)
File Type: jpg IMG_20160722_170714.jpg (54.1 KB, 7 views)
radford is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 25-08-2016, 10:47 AM   #5112
hisdibs
Starter Motor
 
Join Date: Aug 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi all. Looks like a great site wih lots of interesting info and conversation.
I have a dead stock 1967 XR Falcon wagon, 170ci, 3 on the tree.

Talk soon ,
Joe
hisdibs is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-08-2016, 04:12 PM   #5113
Rob67
Starter Motor
 
Join Date: Aug 2016
Location: Lithgow, NSW
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

G'day y'all, ta heaps to the admin for my acceptance. I've not long acquired my 3rd ford and am now the proud owner of a BA 5.4l ute. Altho it's to be more my workhorse/everyday car. I previously owned and loved a BF XR6 turbo, awesome car but alas was the undoing of my licence. I also once owned an XD ute with 5.8l V8.

Last edited by Rob67; 30-08-2016 at 04:29 PM. Reason: memory lapse
Rob67 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2016, 05:42 PM   #5114
Saarge
Starter Motor
 
Join Date: Aug 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hi All,

I'mlooking forward to hearing all the Ford chat.
Ex-owner of an '67 XR wagon and an XE panel van. Soon to be owner of a 1965 F100.
Thanks for sharing.
Saarge is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2016, 07:05 PM   #5115
Pedro472
Starter Motor
 
Pedro472's Avatar
 
Join Date: Aug 2016
Location: Canberra
Posts: 22
Default Re: Welcome to New Members - Post here to say gday!

Hi All, thanks for accepting my application. On to Ford number 5, which is an 2016 FG-X XR6 Sprint. Previously owned EB S Wagon, ED Futura, KE Laser Sedan (!) and a manual FG XR6. Just sent application to local Ford Club. Cheers, Pedro.
Pedro472 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 31-08-2016, 12:43 PM   #5116
kimf100
Starter Motor
 
kimf100's Avatar
 
Join Date: Aug 2016
Location: Perth
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Greetings too all and thank you for accepting me on your fine forum. I'm a long time (meaning I can remember when a lot of your classics were new) Ford owner and lover. Currently have a F100 LWB 4x4 with original 351C on LPG - love it.
kimf100 is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2016, 11:42 PM   #5117
ijes3107
Starter Motor
 
Join Date: May 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Good evening all, can anybody tell me if I can fit BA standard rotors and pads into a series 2 AU Falcon. I have series 1 which I have converted to series 2 set up front and rear. dba quote different parts numbers AU to BA on the rotors etc. Any help would be appreciated. Regards Ian
ijes3107 is offline   Reply With Quote Multi-Quote with this Post
Old 02-09-2016, 01:28 PM   #5118
Ash01
Starter Motor
 
Join Date: Sep 2016
Posts: 3
Default Re: Welcome to New Members - Post here to say gday!

Hi there everyone.
I'm not sure how to use this sight.
Does anyone know where I can find a Ford Explorer Specialist in brisbane?
I have had a mechanic that has tottaly ruined my car and need to get someone who specifically knows about the Ford Explorer Xlt 2004 model.
Thanks heaps in adavance guys.
Go Ford
Ash01 is offline   Reply With Quote Multi-Quote with this Post
Old 02-09-2016, 02:46 PM   #5119
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by ijes3107 View Post
Good evening all, can anybody tell me if I can fit BA standard rotors and pads into a series 2 AU Falcon. I have series 1 which I have converted to series 2 set up front and rear. dba quote different parts numbers AU to BA on the rotors etc. Any help would be appreciated. Regards Ian
Have you tried the search function? Or ask in the AU-BF forum

http://www.fordforums.com.au/forumdisplay.php?f=30
Quote:
Originally Posted by Ash01 View Post
Hi there everyone.
I'm not sure how to use this sight.
Does anyone know where I can find a Ford Explorer Specialist in brisbane?
I have had a mechanic that has tottaly ruined my car and need to get someone who specifically knows about the Ford Explorer Xlt 2004 model.
The Explorer Forum would be a good place to start, Someone in there may be able to help.

http://www.fordforums.com.au/forumdisplay.php?f=364
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 02-09-2016, 03:02 PM   #5120
Ansimp
Regular Member
 
Join Date: Jul 2015
Location: Brisbane
Posts: 393
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Ash01 View Post
Hi there everyone.
I'm not sure how to use this sight.
Does anyone know where I can find a Ford Explorer Specialist in brisbane?
I have had a mechanic that has tottaly ruined my car and need to get someone who specifically knows about the Ford Explorer Xlt 2004 model.
Thanks heaps in adavance guys.
Go Ford
Unfortunately many in the trade refer to them as Ford Exploders....
Ansimp is offline   Reply With Quote Multi-Quote with this Post
Old 02-09-2016, 06:01 PM   #5121
Holmes11
Starter Motor
 
Join Date: Apr 2016
Posts: 22
Default Re: Welcome to New Members - Post here to say gday!

I thought I'd best say hello, as I've been hanging around for a few months now to soak up some knowledge.

Have a PX Ranger and a SZ Territory currently in my possession, had come seeking the know how to fix various issues on the pair of them.
Holmes11 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 04-09-2016, 06:50 AM   #5122
waynocrano
Starter Motor
 
Join Date: Sep 2016
Posts: 4
Smile waynocrano says HELLO to all...

Hello to all...
Im waynocrano and new to the forum......
I'm from out of Perth and drive a white dec 2007
BF F6 RSPEC, and I'm in love.....love the car....
The car is immaculate and has just turned over
60, 000 km
All original except for 100 pound
injectors and a flash tune, 300 rwk, thanks to
Simon at extreme ford perth
Cant wait to get in the forum, looking forward to it
See ya on the road
waynocrano is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 04-09-2016, 08:46 PM   #5123
HOTPSUTE
RED HOT ALLOY BLOCK
 
HOTPSUTE's Avatar
 
Join Date: Jan 2010
Location: Perth WA.
Posts: 36
Default Re: waynocrano says HELLO to all...

Hello back at ya waynocrano
__________________
BF II 06 Super Pursuit Ute Manual

2.8H Kenne Bell
Mild ported heads
Ford Motorsport GT Alloy Block
463 rwkw
Powered by Xtreme Ford Tuning
HOTPSUTE is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2016, 05:38 AM   #5124
Louie.35au
Starter Motor
 
Join Date: Sep 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

Hello to all of you..thanks for letting me join in your group..
Louie.35au is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2016, 07:27 AM   #5125
YarravalleyXR8
Starter Motor
 
Join Date: Aug 2016
Posts: 20
Default Re: Welcome to New Members - Post here to say gday!

Howdy all.
I've been lurking for a few weeks to get some Intel on my car.

After many years of dreaming I am now the proud owner of a Ford V8

I have a FG XR8 with the luxury pack & I'm in love, my first car purchased with my heart & not my head in mind.

I have owned an XF & it gave me 300k of reliable service, hopefully this one will last just as long. If I had the cash I'd love an XE manual with a 351, ideally an ESP but I might need to win the lotto for that dream.

My biggest dilemma at the moment is do I leave my XR8 stock or stick a cat back exhaust on it because it misses the V8 growl
YarravalleyXR8 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 05-09-2016, 02:57 PM   #5126
PriceSmith
Starter Motor
 
Join Date: Sep 2016
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Hi All,
Great site. Wish I was joining for more positive reasons - but sorry to say I've joined up so I can see how many other 2012 Territory AWD Diesels have been or are leaking water into the cabin resulting in wet floors every-time it rains!

Been going on now for more than 15 months and I'm fed up!
PriceSmith is offline   Reply With Quote Multi-Quote with this Post
Old 05-09-2016, 07:51 PM   #5127
Bolly47
FF.Com.Au Hardcore
 
Join Date: Jan 2013
Location: upper lockyer qld
Posts: 517
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by PriceSmith View Post
Hi All,
Great site. Wish I was joining for more positive reasons - but sorry to say I've joined up so I can see how many other 2012 Territory AWD Diesels have been or are leaking water into the cabin resulting in wet floors every-time it rains!

Been going on now for more than 15 months and I'm fed up!
so where is water leaking is in the front or rear floor ��
Bolly47 is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2016, 01:03 AM   #5128
Holty
Starter Motor
 
Join Date: Sep 2016
Posts: 10
Default Re: Welcome to New Members - Post here to say gday!

Hi all just thought ill give this forum a go as im a ford man and have owned a zf Fairlane 500 302 cleveland for a year now and loving it 👍
Holty is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2016, 10:07 AM   #5129
PriceSmith
Starter Motor
 
Join Date: Sep 2016
Posts: 2
Default Re: Welcome to New Members - Post here to say gday!

Quote:
Originally Posted by Bolly47 View Post
so where is water leaking is in the front or rear floor ��
Hi - As far as I can tell its now only leaking into drivers side floor - front and rear. In earlier times all carpets have been saturated. They have resealed doors and fitted plastic into each of the doors as a few people on here have also had to do. Now it seems just the drivers side is still an issue for unknown reasons.
PriceSmith is offline   Reply With Quote Multi-Quote with this Post
Old 07-09-2016, 01:32 PM   #5130
pfry1942
Starter Motor
 
Join Date: Sep 2016
Posts: 1
Default Re: Welcome to New Members - Post here to say gday!

I have joined Ford Forums to alert the Ford Enthusiast Community to the fact the Ford Australia intends to ship the Company Archives to the USA - so they will not be accessible to people in Australia - I urge you to post the following article by Peter Robinson in Wheels Magazine to as many Ford sites and in particular to Social Media as possible to publicise the Ford plan and to prevent it happening - http://www.wheelsmag.com.au/news/160...ralian-archive
Regards
Peter Fry
pfry1942 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL