Hard to get bits Wanted or For Sale - Page 18

351p6replica · 05-08-2011, 05:34 PM

cjp are the quater lites like the 1s on xb coupe pic above? if so l have a pair from my zh that should fit l had them sitting for a while pm me if you still need them l also have a great condition fuel tank xc modle l beleive would fit a xc coupe for original look if anybody after it pik up maryborough no dints new rubber joiner for filler an sender unit

grumblexr6 · 11-08-2011, 07:35 PM

G'day all I'm trying to track down set of door trims front and rear the condition of them can be trashed as I'm just after the metal top, Thanks Jon

lowxr · 12-08-2011, 12:12 PM

after the dash spears i think there called silver thanks

1FAT4D · 13-08-2011, 05:51 PM

Looking for coupe mags. 15x10 hotwires. I have got the 14x8s but don't have the rear rims. Cheers

xbrules · 13-08-2011, 06:02 PM

Quote:

Originally Posted by 1FAT4D

Looking for coupe mags. 15x10 hotwires. I have got the 14x8s but don't have the rear rims. Cheers

Neales Wheels in Sydney make those new now

http://www.nealewheels.com.au/

lilmattie · 08-09-2011, 11:30 AM

I'm after a P5 LTD console for my coupe please.

I know.. probably all snapped up by our Landau ownsers already.

lilmattie · 08-09-2011, 11:41 AM

Quote:

Originally Posted by cjp

Hi Guys, Im chasing a few coupe parts if anyone can help;

- Good condition coupe rear quarter panel indicators
- Fairmont coupe top of door chrome trim (I have a couple of sets of rear 1/4 panel trim - maybe someone is interested in a swap?)
- Rear parcel shelf side panels (I don't know what they are called but every coupe owner should know what they are!). See pic below

I don't need NOS quality - just good condition. PM me if you would like to sell any of the above.

Thanks, Chris

I'm after a set of these as well.. same condition. Suitable for retrimming.

351p6replica · 08-09-2011, 01:47 PM

got a pair pm me ya email an l will send ya acouple of quter indicators pics if ya like mate

351p6replica · 08-09-2011, 06:12 PM

should anybody require coupe rear quater indicators l have a pair with crome around them . they are zh ones but l did have them in my xa coupe ages ago

gcg2503 · 08-09-2011, 06:28 PM

ZH rear qtr lenses fit XA XB coupes (and Landaus) but are not correct

These are XA Coupe/ landau correct rear qtr lights

KOUPE76 · 07-10-2011, 05:37 PM

Wanted - centre pad for XBGT steering wheel, have genuine parts if interested on a trade!

zeuss000 · 08-10-2011, 09:13 AM

Quote:

Originally Posted by KOUPE76

Wanted - centre pad for XBGT steering wheel, have genuine parts if interested on a trade!

Howdy Mate, I have what i think is a centre pad from an XBGT wheel but i am not 100% sure, i wouldn't bother mentioning it but it is in really nice condition, can you point me to a pic of what you are after? if not i will take one and upload it so you can check it out. BTW It is black.
Cheers
Ed

KOUPE76 · 08-10-2011, 02:17 PM

Quote:

Originally Posted by zeuss000

Howdy Mate, I have what i think is a centre pad from an XBGT wheel but i am not 100% sure, i wouldn't bother mentioning it but it is in really nice condition, can you point me to a pic of what you are after? if not i will take one and upload it so you can check it out. BTW It is black.
Cheers
Ed

Hi Ed,
Here is a pic of the centre pad I'm after, not fussed if you havent got the inserts.
Cheers
Mick

zeuss000 · 08-10-2011, 05:25 PM

Here is a pic of the centre pad I'm after, not fussed if you havent got the inserts

Sorry to waste your time mate, that is not what i have. Good luck with your search.
Chers
Ed

coupe75 · 09-10-2011, 03:06 PM

Wanted, top chrome trim for xb coupe. call or pm 0418335841. I'm located in melbourne, and am happy to pay postage.

gcg2503 · 15-10-2011, 10:14 PM

Landau rear bucket seats for sale

have been retrimmed though

http://www.ebay.com.au/itm/Ford-XA-X...item43aa5283e6

Tony xa · 20-10-2011, 09:36 PM

Hey guys I am looking for both left and right xa or xb coupe door skins .I am looking for nos or repo or hand made ones .

XA5800 · 28-10-2011, 06:12 PM

Looking for XA Coupe fuel filler neck, any help appreciated

Thanks Brett

carrot · 31-10-2011, 03:08 PM

I am after the Holey Grail of Landau parts...... Vinyl roof moulds. PM me if you can assist and I know they are expensive!
Phillip

Scooter · 31-10-2011, 08:59 PM

Quote:

Originally Posted by XA5800

Looking for XA Coupe fuel filler neck, any help appreciated

Thanks Brett

One has just turned up on Ebay quite cheap with a buy it now! $60 I think.
Just double check it is XA and coupe length.

timothyds · 04-11-2011, 07:58 PM

i hope iv put this in the right place. im looking for a full conversion setup for my XB Cleveland v8 to manual. iv tried ebay but nothing is in NSW and trust is an issue so i thought id see if anyone here has anything to sell. the more complete the better as i dont want to have to track bits down if i dont have to. iv got about 350 od HP so im thinking top loader would be best but open to advice. thanks all and check your sheds for me !

gtxb67 · 05-11-2011, 10:45 AM

cost might be a factor, but couldn't you get virtually everything brand new from shops in sydney. at least then you should be right to just bolt it in

in 2002 my conversion cost around $3000 - a fair bit, but in "theory" it was all good. the stuff from castlemaine rod shop was perfect. the gt performance shop items, less so, but it was easier than trying to source parts privately

XC GXL · 05-11-2011, 05:50 PM

Quote:

Originally Posted by timothyds

i hope iv put this in the right place. im looking for a full conversion setup for my XB Cleveland v8 to manual. iv tried ebay but nothing is in NSW and trust is an issue so i thought id see if anyone here has anything to sell. the more complete the better as i dont want to have to track bits down if i dont have to. iv got about 350 od HP so im thinking top loader would be best but open to advice. thanks all and check your sheds for me !

Give Kris Hodges a call in Warilla. He will be able to help you out mate.

Kris Hodges Automotive
Unit 2, 12 Commercial Drive
Warilla NSW 2581
Kris Hodges
Ph: 4297 6620
Fax: 4297 8970

Wayne

XB74GS · 06-11-2011, 06:32 AM

Hi everyone,

I'm after a set of rear bar overriders for my coupe.
Must be complete & in good condition.
Can trade parts if required as I have collected a bit of stuff over the years.
Thanks
Todd.

JG65TE · 06-11-2011, 09:05 AM

Quote:

Originally Posted by Scooter

One has just turned up on Ebay quite cheap with a buy it now! $60 I think.
Just double check it is XA and coupe length.

Its not, came from a sedan. Already checked it for a spare for myself

EasyD · 08-11-2011, 03:19 PM

Hi Guys,

Australia post has lost and as a result I'm chasing:

1. Windscreen wipers, coupe.(are there any alternatives?)

2. Dash piece (the fill in plate on the drivers end of the dash between the dash and door jam if that makes any sense) any colour

3. Glove box (anything in usable cond.)

4. Passenger side top corner windscreen trim piece.

I don't mind paying what it's worth and if you're in Brisvegas and can drop it off to oz-rods in Meadowbrook even better. (happy to compensate the seller for this also)

memphis2k · 14-11-2011, 01:53 PM

Hey everyone

Im selling off a HEAP of my coupe spare parts to fund the final stage of my build, plenty of hard to get bits (I have literally a whole coupe worth of spares) drop me a PM with what your after and a price your looking to pay and maybe we can do a deal.

Only thing I dont have is full panels that are usable apart from a NOS radiator support. If you only need a small part of a panel for a patch up I may be able to assist.

gcg2503 · 14-11-2011, 02:02 PM

pm sent

gtxb67 · 14-11-2011, 05:48 PM

cortina windscreen wipers work - from memory they are 16 inch

THE4RD · 08-12-2011, 07:34 PM

Wanted:

Landau Interior:

Front Seats
Front Door Cards with arm rests (no need for the power window switches)
Passenger and Driver's footwell kick panels
Rear Seats
Panel between Rear Seats
Rear Door Cards
Rear Storage Boxes (both sides)
Rear Trim Panels (Both sides)

I already have the console, dash and under dash (carpeted) panels

PM me if you have one for sale