(QLD) WILLOWBANK TEST & TUNE Wednesday 18th of JUNE!!! - Page 2

CADSKY · 02-06-2008, 06:52 AM

Quote:

Originally Posted by Neoxr6

hahaha his car is Prett quick. i had him till 330ft then good night Irene he just kept pulling away

yeah that was the run that i changed into second at 3800rpm

:
which ironically was my best 60ft start for the night with a 2.037 :togo:

joe260 · 02-06-2008, 07:12 AM

Quote:

Originally Posted by TUF260

once i work out how to juggle the clutch and the revs andkeep it in the staging area and get the power to the ground then ill race you, until then i dont need to be physically embarrased ;)

i wish i just had a car i could roll up to the lights in and all i had to worry bout was the accelerator...would make life a bit simpler...lol

would also be good if some of you more experienced racers were there to lend some tips to a certain crap XR8 driver (me) lol....oh and maybe the other one.......(jo)..........

the only part i would beat you in swan would be the top end. other than that unless i can produce a miracle and take my 60ft times from 2.6 to 2.1 like you then i would say that i cant crack into the 13's....

my launching is what kills me....:(

was also running an open pod filter and it was a hot day so i woulda been sucking in heaps of hot air... i dont have that problem now, and i also have wider rubber with tread on now lol....

what ya tryin to say :jab: i know how ta drive lol. and stop making excuses on your times

: ;)

TheSneakiness · 02-06-2008, 07:16 AM

Can't make a Wednesday night... :(

TUF270 · 02-06-2008, 07:49 AM

Quote:

Originally Posted by XTC 190

Wish I could make it but wednesday too hard, by the time I get home and get out there night would be over.

wednesday is hard for me having to drive 2hrs down there, but ill just get the afternoon off, well i'll try.......

XRT-HOWSEE · 03-06-2008, 11:04 AM

i'll be heading out with Paul from elite auto, i'll have my 315rwkw xr6t and paul is bringing his 350+rwkw f6, so it'll be a good night for the fords

TUF270 · 05-06-2008, 04:21 PM

well i just ok'd it with the boss to take the whole day off so im definitely going....cant wait... ;)

xrf_27 · 05-06-2008, 04:27 PM

y arnt u wroking michael ha ha ha ill come too ;) ill watch

Neoxr6 · 05-06-2008, 05:11 PM

not long now, i need more runs............

CADSKY · 05-06-2008, 06:02 PM

lol its adictive!! i cant wait either.

although i got some really good times last time, i just know there more in my car. if i can learn how to use the sequential properly i think i will beat my best time and beat that 100mph mark too!

Road Games · 05-06-2008, 06:15 PM

Quote:

Originally Posted by swan_ford

lol its adictive!! i cant wait either.

although i got some really good times last time, i just know there more in my car. if i can learn how to use the sequential properly i think i will beat my best time and beat that 100mph mark too!

Get your bum down here for a manifold and tyre swap and i GAURANTEE you will have the new record !!
I want them back but

: !!

joe260 · 05-06-2008, 06:20 PM

doesnt take you all day to drive there mick :P not long to go yay

Neoxr6 · 05-06-2008, 06:34 PM

hey no cheating, he will make me look even worse if he gets them off you

XTC 190 · 05-06-2008, 06:54 PM

I hate you all, i soooo want to go but bloody work etc etc etc

:

Neoxr6 · 05-06-2008, 07:25 PM

do you have any go fast bits Jason? I cant get beaten by Aaron by to much

XTC 190 · 05-06-2008, 07:46 PM

Quote:

Originally Posted by Neoxr6

do you have any go fast bits Jason? I cant get beaten by Aaron by to much

I got a good 4 speed auto, swap yah

I wish I did bud but unfortunatley all bolted to my car.

Take everything out thats not bolted down, thats inside the car and boot keep as least fuel in as possible, go some V power for a few days before hand air filter out lower profile wheels and tyres got some 16 inchers here with low profile tyres if you wanna borrow them.Not sure if they fit the BF they should.

Zed7fiddy · 05-06-2008, 07:46 PM

Wooot

i should be there guys, gotta source some boots, QR dont let you run bikes without ankle reinforced boots, soooo looking foreward to this, gunan annihalate any time the barge ever would of done

Lets jsu thope i can con my mate mel into taking her bike and her van down, or maybe luke will take me in his xr ute? cmon guyssss

CADSKY · 05-06-2008, 08:06 PM

Quote:

Originally Posted by DAZZLER351

Get your bum down here for a manifold and tyre swap and i GAURANTEE you will have the new record !!
I want them back but

: !!

sweet i mite just have to tkae u up on that!

i MUST humiliate josh

:

Neoxr6 · 05-06-2008, 08:29 PM

hey go easy what did i ever do to you? lol

I mite try the 16's to see if they fit before than Jason Thanks.

XTC 190 · 05-06-2008, 08:33 PM

No worries bud, see what else we can do for ya, get you closer but then again Swanny has got more bits than yours so will be a race against your own time I feel but I can see that droppin a fair bit

Road Games · 05-06-2008, 08:38 PM

Quote:

Originally Posted by Neoxr6

hey go easy what did i ever do to you? lol

I mite try the 16's to see if they fit before than Jason Thanks.

Tractive effort is higher with your existing wheels than the 205/50 16 wheels and tyres i gave Jason ??( if they are the 14.4 specials ??)
Aaron drove away from me when i had my 19's i can gaurantee you the reverse would take place with my 16"s (alloys fitted).
in fact he will run a 13.8 with my rims on !!
Timeslips prove this ...
Steel rims are heavy and narrower and will stuff up your ABS and SCM because of the different dia front to rear !!!
Be warned .....
Ba ,s can turn traction control off on the dyno but i am unsure about stability control on the BF ??
Have you got the O2 sensor issue sorted ?

joe260 · 05-06-2008, 08:43 PM

anything i can borrow of anyone ;) lol

XTC 190 · 05-06-2008, 09:06 PM

14.2, just to clarify

Just think if we could get 15's on

Never had any probs with the Abs and stuff with different height wheels, Bf may be different unsure on that

Road Games · 05-06-2008, 09:47 PM

Quote:

Originally Posted by XTC 190

14.2, just to clarify

Just think if we could get 15's on

Never had any probs with the Abs and stuff with different height wheels, Bf may be different unsure on that

Sorry, i was told that run was on slicks ??
My bad , BF is way different... Hopefully they have the same buttons i do ....Gonna snoop around when Aaron gets here....

You can get 15"s on , have a watch of the Ford Forums National's Footage ..., Real slicks fit easy.
Thats how i destroyed my 4.11s !!

JO , did Vic contact you ??

CADSKY · 05-06-2008, 09:56 PM

Quote:

Originally Posted by DAZZLER351

Aaron drove away from me when i had my 19's i can gaurantee you the reverse would take place with my 16"s (alloys fitted).
in fact he will run a 13.8 with my rims on !!

that would be awesome!!! somehow i dont think it will happen. i know i said i had more in my car.... but 13.8's untuned???? i dont know about that.

powerbulge · 05-06-2008, 11:42 PM

Well I will be definitely up for a run on Wed. I have my car booked for an exhaust job. I'm getting a twin 2.5" system cat back with quad tips. Can wait!

Dazz you said something a little while ago about looking for some slicks and finding out the smallest rim you can fit on the xr8 ute. I'm still interested.
Also I didn't think about the traction/stability control system being affected by the smaller dia rear wheel. But will turning off traction control be enough to stop any issues? Bf does have a button to turn it off.

CADSKY · 06-06-2008, 06:54 AM

Quote:

Originally Posted by powerbulge

But will turning off traction control be enough to stop any issues? Bf does have a button to turn it off.

did u run your car with the traction control on last weekend?? if so TURN IT OFF!!!!!!!!!

Road Games · 06-06-2008, 07:31 AM

Quote:

Originally Posted by powerbulge

Well I will be definitely up for a run on Wed. I have my car booked for an exhaust job. I'm getting a twin 2.5" system cat back with quad tips. Can wait!

Dazz you said something a little while ago about looking for some slicks and finding out the smallest rim you can fit on the xr8 ute. I'm still interested.
Also I didn't think about the traction/stability control system being affected by the smaller dia rear wheel. But will turning off traction control be enough to stop any issues? Bf does have a button to turn it off.

Must have been a killer burnout

Yes turn it off that is fine...
Give BLUEPOWER a call mate , Chris will advise you what is needed after all he runs 10.0s at over 140 mph with a 8" slick

TUF270 · 06-06-2008, 07:56 AM

im going to get anihilated by everyone.....including probably stock Yaris if one happens to turn up....lol.....starting to think my car sucks.... :(

powerbulge · 06-06-2008, 08:21 AM

Quote:

Originally Posted by swan_ford

did u run your car with the traction control on last weekend?? if so TURN IT OFF!!!!!!!!!

Yes I forgot to turn off the traction control on the first run.....I couldn't workout why I couldn't keep the rears spinning!!!!

:
But for the next three runs I remembered.

Quote:

Originally Posted by Powerbulge

Also I didn't think about the traction/stability control system being affected by the smaller dia rear wheel. But will turning off traction control be enough to stop any issues? Bf does have a button to turn it off.

I was tired last night when I was replying to the post. What I was referring to was turning off traction control with smaller dia rear rims, as I was considering buying a smaller sized rim with slicks.

Quote:

Originally Posted by DAZZLER351

Steel rims are heavy and narrower and will stuff up your ABS and SCM because of the different dia front to rear !!!
Be warned .....
Ba ,s can turn traction control off on the dyno but i am unsure about stability control on the BF ??

Neoxr6 · 06-06-2008, 09:00 AM

no not yet i would like a pic of the exhaust side of a Bf please. i can only see 1 o2 sensor. i think they might have got rid of the other one. I would like some proof before i go back to them.

Thanks