New Tech Article - AU Wiring Diagrams **UPDATED**

[russellw]

You mean like THIS one??

Originally Posted by RBAKER

help! the fuel gauge system looks simple, but it involves components;
interface computer and instrument drivers (located on instrument
cluster panel) and possibly a link to the EEC; a diagram may assist to
understand and solve probs

[Mack 6]

Might be a little late here russell, but do you have a diagram on the pinout for the eec-v module?
I need to identify a few wires coming out

[russellw]

Hi Mack6

You'll find the pinout information in the Tech Article Database HERE

Cheers
Russ

Originally Posted by Mack 6

Might be a little late here russell, but do you have a diagram on the pinout for the eec-v module?
I need to identify a few wires coming out

[JC]

How handy are these diagrams? Well, let me tell you. I was at the in-laws, and wanted to install some little tweeters in the front A pillar trim. I ran speaker wire to the back of the head unit, but then wet to look up my book to show me which coloured wires to use, and guess what? Left the AU workshop manual at home. So onto the net, go to FF, into this thread, and found the info I needed.

Thanks Russ - without your diagrams, I would be speakerless tonight!

[Laminge]

Originally Posted by russellw

You mean like THIS one??

hes either blown up or missing in action!

[JC]

Originally Posted by Laminge

hes either blown up or missing in action!

Who? Russ? Please explain!

[xepvan351]

im wanting to change my standard tape player with stacker op to a single din pioneer cd player in my au1 xr8 ute and i just need to know the colours of the wires. can anyone help??

[ferral]

hi russ just wondering if u had a clear copy of the audio wiring for a 1999 au falcon or could tell me the wire colours behind the head deck plz

thanks

[Syncro]

WOW Thats not for the amatures like me.lol

ps. does anyone know the code for an AU radio cassette player?

[HLC]

Originally Posted by Syncro

WOW Thats not for the amatures like me.lol

ps. does anyone know the code for an AU radio cassette player?

should be on a card in your manual... if not, you'll have to give Ford a ring.

[cookie]

do you have wiring diagram for au2 cruise control

[russellw]

Originally Posted by cookie

do you have wiring diagram for au2 cruise control

Like THIS one??

Cheers
Russ

[Syncro]

Is there a key for the wiring colours

[walmec2003]

Do you have, or can you get the wireing diagram fur the AU ABS system. I have a high earth resistance, & need to know where the earth's are located.
Walmec2003.
Thank you.

[CookyMonsta69]

Hi guys how are you all? I have a slight problem with the sterio in my AUI. I've upgraded the sterio to a cd player from an AUII. Everything works fine appart from the steering wheel controls. I know this isn't a big thing, but I hate having something on my car that doesn't work. Any help at all would be greatly appreciated

Thanks heaps

Cooky
:

[russellw]

Originally Posted by Syncro

Is there a key for the wiring colours

There is and it can be found HERE

Cheers
Russ

[russellw]

Originally Posted by walmec2003

Do you have, or can you get the wireing diagram fur the AU ABS system. I have a high earth resistance, & need to know where the earth's are located.
Walmec2003.
Thank you.

The diagram HERE and the three after it all cover the ABS system.

Cheers
Russ

[russellw]

Originally Posted by CookyMonsta69

Hi guys how are you all? I have a slight problem with the sterio in my AUI. I've upgraded the sterio to a cd player from an AUII. Everything works fine appart from the steering wheel controls. I know this isn't a big thing, but I hate having something on my car that doesn't work. Any help at all would be greatly appreciated

Thanks heaps

Cooky
:

The RH side of the diagram HERE shows the wiring for the steering wheel controls which runs up through the steering column.

Cheers
Russ

[FGII-XR6]

hi all i know this is off the subject of the AU but has anyone got a pinout for the BA ECU

thanks

Brett

[FUZMOBILE]

looking for wiring for starter motor for au2 from ignition to starter, also watertemp sensor wiring

[teabags2]

Russ,
Is a wiring diag available for the AU3 Forte 4.00Lt Auto which tells me what each of the wires from the ECU to the trans does? Also for factory cruise?

Bob

[russellw]

Originally Posted by FUZMOBILE

looking for wiring for starter motor for au2 from ignition to starter, also watertemp sensor wiring

Start & Charge circuits added and can be found HERE
Water temp sensor is under the BEM section.

Cheers
Russ

[russellw]

Originally Posted by teabags2

Russ,
Is a wiring diag available for the AU3 Forte 4.00Lt Auto which tells me what each of the wires from the ECU to the trans does? Also for factory cruise?

Bob

If there is it will either be in Section 2 or Section 8.

Cheers
Russ

[FUZMOBILE]

Originally Posted by russellw

Start & Charge circuits added and can be found HERE
Water temp sensor is under the BEM section.

Cheers
Russ

thanx buddy much appreciated

[phibza_XR6]

hey mate, was wondering if a wiring diagram was available that showed what and where the tacho signal wire is on a AU series 2 xr6 ute manual.
if you were able to point me in the direction of it i would be very thankful

[FGII-XR6]

it is pin 45 on the ECU pink with a blue trace or pin 16 on the cluster

[FGII-XR6]

it is pin 45 on the ECU pink with a blue trace or pin 16 on the cluster where it is bink with a white trace not sure where the connector is where it changes colour but it does these colours are for AU2 but i assume it suits all

[phibza_XR6]

thanks mate, im trying to wire up a shift light so i will probably just try and use the wire that goes into the cluster. I no there is 2 plugs that go into the cluster which one of these would the wire be in? also do you no which pin power and earth is out of all the wires that go into the bak of the cluster?

[V8Au2FairLane]

would anyone know how to remove the cover to the traction control button to change the globe and the power windows cover thanks

[Bokk]

russellw great diagrams, was wondering if you have a schematic that covers the Oxy Sensor to the ECU, keep up the good work....I,m doing a project car that i'm installing the oxysensor in, have the ECU and fuel/air mixture gauge etc