AU Parts Data - Page 2

Duffman · 13-01-2005, 04:21 PM

Thanks russel that picture is better then mine (only just!). Yeah from pulling out the cluster with the allen keys it seperated the mask from the lens around the edges. Then when the lights are on you can see a rign of light around the outside. I can't seem to get them back together and I dont know which one needs replacing so I guess its best to replace them both.

Thanks again

Oh russ that part number is it for the high or low series cluster, just wondering cause the pic you attached is of the high series.

Dark Horse · 14-01-2005, 11:56 AM

Russ, is the lower grille part of the T3 interchangeable with placing it on the XR's? If so, what is the part number and price?

DivHunter · 14-01-2005, 12:22 PM

Tau 10849 A Instrument Cluster, (te50 Or Ts50 Or Tl50) $1213.00
Tau2 10849 A Instrument Cluster, Xr, Less Police Pack $431.00
Tau2 10849 B Instrument Cluster, Xr, With Police Pack $435.00
Tau2 10849 F Instrument Cluster, (te50 Or Ts50 Or Tl50) $589.00

Could someone make sense of this for me? Is this telling me the AU1 T-Series cluster is twice the price of the S2/3? Why would this be the case?

Also out of all the clusters is there an AU high series with police pack?

**russellw** · 14-01-2005, 03:58 PM

As far as I know it isn't interchangeable.

Cheers
Russ

Quote:

Originally Posted by Dark Horse

Russ, is the lower grille part of the T3 interchangeable with placing it on the XR's? If so, what is the part number and price?

**russellw** · 14-01-2005, 04:02 PM

Quote:

Originally Posted by Fairmont99

Tau 10849 A Instrument Cluster, (te50 Or Ts50 Or Tl50) $1213.00
Tau2 10849 A Instrument Cluster, Xr, Less Police Pack $431.00
Tau2 10849 B Instrument Cluster, Xr, With Police Pack $435.00
Tau2 10849 F Instrument Cluster, (te50 Or Ts50 Or Tl50) $589.00

Could someone make sense of this for me? Is this telling me the AU1 T-Series cluster is twice the price of the S2/3? Why would this be the case?

Also out of all the clusters is there an AU high series with police pack?

Yes it is twice the price - S3 clusters reverted to an XR style cluster as part of the cost cutting exercise that saw the prices reduced - that is to say it had the blue background and graphics where the S1 had the white faced instruments. Don't be fooled by the TAU2 part number - it was actually the S3 cluster.

Russ

DivHunter · 14-01-2005, 05:56 PM

Quote:

Originally Posted by russellw

Yes it is twice the price - S3 clusters reverted to an XR style cluster as part of the cost cutting exercise that saw the prices reduced - that is to say it had the blue background and graphics where the S1 had the white faced instruments. Don't be fooled by the TAU2 part number - it was actually the S3 cluster.

Russ

Thanks Russ

Damn and the S1 cluster is the one I want.

FRDGAL · 23-01-2005, 05:47 AM

I need a part # and price for a dash pocket for when I change to stereo to a single din type.

LG · 23-01-2005, 11:57 AM

Quote:

Originally Posted by Fairmont99

Thanks Russ

Damn and the S1 cluster is the one I want.

You can buy white faces for the XR Clusters. Then just put the blue globes in, and it will be like the T1 Cluster

**russellw** · 23-01-2005, 09:24 PM

Quote:

Originally Posted by AU_Fairmont -S-

I need a part # and price for a dash pocket for when I change to stereo to a single din type.

You might need to provide a but more information there to help.

Russ

FRDGAL · 23-01-2005, 11:50 PM

Quote:

Originally Posted by russellw

You might need to provide a but more information there to help.

Russ

A dash pocket. For when you remove the double din stereo in the AU's and fit a single one. It's that pocket thing that fills the empty space.

DivHunter · 24-01-2005, 09:08 AM

Did any AU actually come with a single din HU?

normell · 24-01-2005, 09:41 AM

Yeah, Forte & Futura, and I think XR's, AUI's had single din radio's, then series II & III went to double din.

DivHunter · 24-01-2005, 11:33 AM

Ahh so the AU1 Forte / Futura and possibly XR, interesting. Will have to remember that when I want to change the HU in the Ghia.

normell · 24-01-2005, 12:39 PM

I think it's called a pocket.
Part number is
ER18846-A1
About $15.75

**russellw** · 24-01-2005, 12:45 PM

ER 18846 A1 ESCUTCHEON RADIO, DK GRAPHITE - BASE RADIO, FORTE - it's about $17 and was only used on the Forte as far as I can tell.

Cheers
Russ

FRDGAL · 24-01-2005, 01:34 PM

Quote:

Originally Posted by normell

Yeah, Forte & Futura, and I think XR's, AUI's had single din radio's, then series II & III went to double din.

Except the AUI update models. They copped the double din.

Also thanks Russ & Normell. I will check that part # with Ford this week and see if it's the one I'm looking for.

LG · 24-01-2005, 02:04 PM

Is that in warm charcoal or just black? When I got my HU installed, I don't think they got the actual factory one off Ford, so I might change em.

normell · 24-01-2005, 02:37 PM

Mine was charcoal, so painted it with satin black.
Ford sells a shit load to joints like Strathfield, JB Etc.

**russellw** · 24-01-2005, 04:01 PM

It's actually Dark Graphite rather than Warm Charcoal.

Cheers
Russ

xceler8shun · 25-01-2005, 09:33 AM

Quote:

Originally Posted by AU_Fairmont -S-

I need a part # and price for a dash pocket for when I change to stereo to a single din type.

there are a few on ebay for sale

http://cgi.ebay.com.au/ws/eBayISAPI....746578448&rd=1

FRDGAL · 25-01-2005, 10:20 AM

Quote:

Originally Posted by Xcel

there are a few on ebay for sale

http://cgi.ebay.com.au/ws/eBayISAPI....746578448&rd=1

Thanks Xcel. I saw that last night but with the postage, it'll cost $24. I rang Ford this morning and they've got them for $15. Double checked on that part # and it is the right one.

LG · 30-01-2005, 06:13 PM

Sorry, does anyone know what description to use, to get a list of the T-Series (1 & 2) Bumpers, front & back?

Thanks

**russellw** · 30-01-2005, 11:30 PM

Part # Description Unit Price
TAU 17C831 A COVER FRT BUMPER BAR, PAINT TO SUIT, T-SERIES $257.00
TNUTVE 17D749 A INSERT FRONT BUMPER, PAINT TO SUIT, T-SERIES $502.00

Unique bits only

LG · 31-01-2005, 04:41 PM

What do you mean by unique bits? Can't you get them?

**russellw** · 31-01-2005, 06:30 PM

I mean those that are still available that are identified as T-Series.

Sourbastard · 03-02-2005, 12:29 PM

Hi guys, I want to get the red rocker cover for the AU2 XR6HP(NON VCT) for my ute, is there a part number for it? I spoke to a ford dealer here and he said it was marked as "obsolete" but he couldnt tell me what that meant, irregardless they didnt have one in stock.

b2tf · 04-02-2005, 09:53 PM

Im reaosonably sure 'obsolete' means that they are limited to the stock remaining at any dealers - i.e. they are not producing any new ones.

For the money they would want i would say it is far cheaper to simply paint your old one - i remember the E series one being about $200 and the only difference between it and the stock one was the red paint. A bit stupid when for $20 or so you can do your own whatever colour you like.

**russellw** · 06-02-2005, 03:30 PM

Quote:

Originally Posted by LG

What do you mean by unique bits? Can't you get them?

Try having a look at this and see if it helps any.

Russ

LG · 06-02-2005, 06:10 PM

Quote:

Originally Posted by russellw

Try having a look at this and see if it helps any.

Russ

Thank you

:

LG · 08-02-2005, 12:19 PM

I'm trying to get some buttons from the Fairmont/Ghia. And I have some, except they aren't a dark dark black.

If you look at the attached image, I have the buttons like the 99 model (a lightish grey).

These are the buttons i got:
AU 18863 B1D - 1/2 height Antenna Switch
AU 18C621 B1D - Back Light Switch

Does anyone know the part numbers for these switches, in the black? I'm also after the traction control switch. Hopefully i can change them for the black ones.

Thanks