Ideas for group buys??

[BlacklistedXR]

I will be interested in a torque wrench, O2 sensor and quick shifter group buy if any of them take off.
I still wouldnt mind getting in on a nolathane bushes group buy but there didn't seem too much interest last time it was mentioned.

[*Sloxr6*]

Just did a bit of digging and I can get 9 o2 sensors for $60 plus postage. If anyone is interested in this let me know and I will order them.

[THR347]

Originally Posted by BlacklistedXR

I will be interested in a torque wrench, O2 sensor and quick shifter group buy if any of them take off.
I still wouldnt mind getting in on a nolathane bushes group buy but there didn't seem too much interest last time it was mentioned.

i second nolathane bushes and sway bars too if possible.

[AUbigfoot]

I'd be up for some sway bars!

[bloggs24]

I'm up for a quality torque wrench, and bushes, however id prefer superpro bushes, not as harsh apparently.

[BlacklistedXR]

Originally Posted by Dellar69

Just did a bit of digging and I can get 9 o2 sensors for $60 plus postage. If anyone is interested in this let me know and I will order them.

Sounds great mate. I will definetly be up for two. PM a moderator (username RG or B2tf) before you do anything and run it by them.

I will be up for whiteline swaybars as well. Forgot to mention that.
Maybe we should get a list going and how many people want in on a group buy.

[low au classic]

nolathane bushes and sway bars are the go if there for a good price

[ronwest]

I'm interested in Nolathane (or whatever) bushes as well.

Maybe not a full kit but there was a mention a little while ago as to which bushes are better as Nolathane and which are better left original (I think JC was involved in the discussion... but then again JC is involved in most discussions, lol)

BTW, I got my O2 sensor (Bosch) off ebay for $50 + postage.

[BlacklistedXR]

This is a list based on interest to give an idea on numbers. Feel free to add or remove your name.

Torque Wrenches:dave93761, ayeyou, pjm58, BlacklistedXR, bloggs24
Scuff Plates: pjm58, stattic,Mikal52, ayeyou
O2 Sensors: dreadly,grandpa_spec_au, mont5.0, BlacklistedXR
Shocks:Windsor 220,dreadley,grandpa_spec_au, BlacklistedXR
Swaybars: BlacklistedXR, ayeyou, AUbigfoot, bloggs24, lowauclassic
Bushes: BlacklistedXR, ayeyou, bloggs24, lowauclassic, ronwest

[low au classic]

Torque Wrenches: dave93761, ayeyou, pjm58, BlacklistedXR, bloggs24

Scuff Plates: pjm58, stattic,Mikal52, ayeyou, lowauclassic

O2 Sensors: dreadly,grandpa_spec_au, mont5.0, BlacklistedXR

Shocks: Windsor 220,dreadley,grandpa_spec_au, BlacklistedXR, lowauclassic

Swaybars: BlacklistedXR, ayeyou, AUbigfoot, bloggs24, lowauclassic

Bushes: BlacklistedXR, ayeyou, bloggs24, lowauclassic, ronwest

[MGM]

what bushes are we talking? whole front end kit? i need only the LCA kit

[BlacklistedXR]

Originally Posted by MGM

what bushes are we talking? whole front end kit? i need only the LCA kit

I think most people would be interested in the whole suspension kit, i could be wrong. I beleive with a group buy that we may be able to get a full Nolathane bush kit for around 550 bucks which isnt that much at all really. I might give GT Suspensions a call tommorow if i have time and see what sort of price they are willing to do for a group buy in nolathane bushes and in whiteline swaybars.
For those who want a group buy on shocks, am i right in assuming you are after koni yellow or reds? dave93761 picked up a set of yellows for 700bucks so we might be able to get it cheaper then that with a group buy. Obviously IRS and Non IRS prices will be different.

[MADED-6]

ill be in for a bushes and swaybars and shocks but need prices first.
cheers josh.

[Dave_Obsession]

Originally Posted by BlacklistedXR

I think most people would be interested in the whole suspension kit, i could be wrong. I beleive with a group buy that we may be able to get a full Nolathane bush kit for around 550 bucks which isnt that much at all really. I might give GT Suspensions a call tommorow if i have time and see what sort of price they are willing to do for a group buy in nolathane bushes and in whiteline swaybars.
For those who want a group buy on shocks, am i right in assuming you are after koni yellow or reds? dave93761 picked up a set of yellows for 700bucks so we might be able to get it cheaper then that with a group buy. Obviously IRS and Non IRS prices will be different.

I floated the idea of a group buy with Ange (owner of GT Suspension) when I was there - wasn't really too keen on discounting it any further, even for a big group purchase - besides I picked up them for just over 50% of RRP......that's a pretty damn good saving anyway!!!

Still, worth an ask if you guys get enough definate people, would be much better to say that you have 15 confirmed purchasers ready to pay up straight away....that may tip the balance in your favour.

[blownv8au]

guys you can get o2 sensors on ebay for $60, Mgm ebay also has nolathane front end kits for $395 i need one also so if we could get these cheaper through a group buy i'm in. with the koni shocks is this guy doing rear shocks to suit utes if so i'll be in a group buy aswell on a set of front and rears (yellows that is).

[dreadly]

Sway bars! ;)

[MGM]

are the o2 sensors the same for AU as they are EF/EL?

[ronwest]

Originally Posted by MGM

are the o2 sensors the same for AU as they are EF/EL?

According to the ebay listing AU's are 4 wire and EF/EL's are 3 wire... but they are the same price ($58 + $7 postage).

[5LGhiaWgn]

Hey guys If people are interested in quickshifters/short shifts I have been able to obtain some decent pricing for group buys of 5 or more shifters if there is enough interest


www.billetproducts.com.au

[BlacklistedXR]

Im definetly interested in a billet short shifter. So you can 100% count me in if it happens.

[mik]

i have one, how about boot struts and bonnet struts .....mine are heading for 9 years old and starting to get tired i`m sure there must be many others with this problem, the tension wrench sounds good, i have one but not convinced of its accuracy ....i think its rubbish, a 27 mm front sway bar i`d definatly be in for that it would go nicely with the koni`s .

[Gambit]

How many would want a torque wrench? What brand & model/s would everyone want? I can see what prices I can get if there is any interest.

[KITBAG]

Go with the MADE IN AUSTRALIA

WARREN AND BROWN
DEFLECTING BEAM (DUAL SIGNAL) :

[Mikal52]

I'll more than likely be in for a quickshifter aswell

[Dave_Obsession]

would also be in for a 27mm front sway bar!

[mik]

Originally Posted by Gambit

How many would want a torque wrench? What brand & model/s would everyone want? I can see what prices I can get if there is any interest.

i would be interested in torque wrench if the price is right (another vote for the warren brown).
1. front 27mm swaybar
2. torque wrench

[LPGUTE]

305nm torque wrench would be great

[private9]

Originally Posted by Mikal52

I'll more than likely be in for a quickshifter aswell

There's a billet group buy on at the moment. I saw one on fordmods, not sure if it's on here.

[FGII-XR6]

i organised the last 2 orders for these I can get another lot up and running if there is enough interest

Originally Posted by AUbigfoot

Scuff plates would be saught after I imagine. I'd be more than happy to look into this for people?

[RG]

Originally Posted by au3xr6

i organised the last 2 orders for these I can get another lot up and running if there is enough interest

I dare say there would be, no harm in putting up a group buy EOI in the group buy section to get an idea on numbers.