Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 30-01-2011, 07:10 PM   #61
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Quote:
Originally Posted by Chicka
Damo, the Oil Filter in the TDCI is a small paper cartridge type.....looks crappy, but obviously does the job. Glad you are enjoying the diesel. Mine is now almost 3 years old with 35,000 kms, and I still enjoy driving it every day ! As for performance, I fitted a DP ( Diesel Power) chip, available from Berrima Diesel in NSW.( and a K&N Air Filter) Goes bloody hard mate !!!
Epic, how much did the chip and filter cost and whats it drive like now? I'm interested once the car is run in but I'm looking at the Code:RED ones.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2011, 07:48 PM   #62
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Wink DP chip - Ford Focus TDCI

Hey Big Damo,regarding the DP Chip and K&N Air Filter....My place of work is right next door to some local Diesel Specialists, they recommended the DP Chip as compared to most of the Euro ones,I can't remember the specific reasons why....however that's what I went with.Actually, I'd just returned from a 2 week trip to Tokyo( which I loved!)...I was on a bit of a high...and enjoying far too many red wines whilst surfing the 'net...so , I bit the bullet and purchased the DP31 Chip Online ! not cheap...$ 1495.00 to be exact.I was a little ****ed at myself for doing so, however, once she was fitted....about 10 mins work..I was rapt ! It is 10 position adjustments,,comes standard set at position 5...I am running mine at 6 , and am happy with that,Supposed to give 118 kw and extra 50 nm of torque. ( It certainly feels like it !)
As regards the K & N Filter...purchased from the UK ( On Ebay)...about $ 130.00 from memory. Contrary to a comment I saw made by another member, I have no doubt that the K&N made a very noticeable difference ( in the seat of the pants ) On my last service, I changed back to the original filter ( just in case Ford spat the dummy) ...When I remembered to re-insert the K&N 2 weeks later, I instantly felt the increase in power and smoothness.Hope my comments might be of some help to you mate.
By the way, I have sent you ( per email) a link to assist you with running in your "rattler"....I have run-in my vehicle using the guidelines, and couldn't be happier !!!!!!!!
Old Mate Chicka!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2011, 08:00 PM   #63
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Quote:
Originally Posted by Chicka
Hey Big Damo,regarding the DP Chip and K&N Air Filter....My place of work is right next door to some local Diesel Specialists, they recommended the DP Chip as compared to most of the Euro ones,I can't remember the specific reasons why....however that's what I went with.Actually, I'd just returned from a 2 week trip to Tokyo( which I loved!)...I was on a bit of a high...and enjoying far too many red wines whilst surfing the 'net...so , I bit the bullet and purchased the DP31 Chip Online ! not cheap...$ 1495.00 to be exact.I was a little ****ed at myself for doing so, however, once she was fitted....about 10 mins work..I was rapt ! It is 10 position adjustments,,comes standard set at position 5...I am running mine at 6 , and am happy with that,Supposed to give 118 kw and extra 50 nm of torque. ( It certainly feels like it !)
As regards the K & N Filter...purchased from the UK ( On Ebay)...about $ 130.00 from memory. Contrary to a comment I saw made by another member, I have no doubt that the K&N made a very noticeable difference ( in the seat of the pants ) On my last service, I changed back to the original filter ( just in case Ford spat the dummy) ...When I remembered to re-insert the K&N 2 weeks later, I instantly felt the increase in power and smoothness.Hope my comments might be of some help to you mate.
By the way, I have sent you ( per email) a link to assist you with running in your "rattler"....I have run-in my vehicle using the guidelines, and couldn't be happier !!!!!!!!
Old Mate Chicka!
Thanks much, I'm also looking at changing the air intake/filter and intercooler, I was looking at the Code:RED intercooler and air intake but they haven't replied to my emails, with the air intake I'm thinking of changing the plastic tube and air filter, with an alloy pipe made up by a friend with the filter ending down somewhere near the grille opening for a cold air intake setup.

EDIT: Just read that email, very good link there, hard to avoid the long constant revs part though as I drive 100km of 100km/h freeway a day, might take her up the mountain and work it out a bit more

I've been shifting before 2000 RPM to the next gear, might have to work it out a bit more, keep it on boost

Last edited by Franco Cozzo; 30-01-2011 at 08:06 PM.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2011, 08:10 PM   #64
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Big Damo
Thanks much, I'm also looking at changing the air intake/filter and intercooler, I was looking at the Code:RED intercooler and air intake but they haven't replied to my emails, with the air intake I'm thinking of changing the plastic tube and air filter, with an alloy pipe made up by a friend with the filter ending down somewhere near the grille opening for a cold air intake setup.
Sounds like a plan , Damo....Just remember not to void your warranty requirements mate! BTW, I forget to mention....The DP Chip people offer a 5 Year Drivetrain Warranty when you use their chip....Have a look at their website anyway....it's pretty interesting!!!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2011, 08:53 PM   #65
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

With warranty, I don't plan on getting the car serviced at Ford, so if something goes wrong warranty wise I'm going to keep the stock parts and put them back in if the car needs to go back to Ford for any reason.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2011, 08:15 PM   #66
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Big Damo
With warranty, I don't plan on getting the car serviced at Ford, so if something goes wrong warranty wise I'm going to keep the stock parts and put them back in if the car needs to go back to Ford for any reason.
Yeah, Interesting point about Ford Service...I have had 3 services at Ford
Complimentary, 15,000 KS AND 30,0000 K'S.How about this...On each occasion, I have been charged for a different type Oil Filter....each time, a different part number...and, a different price. That really ****ed me off...but, they claimed that simple keying mistakes where the problem....so, there was no problem !
Actually, on the last ( 30.000ks) service, I was charged for Shell Rimula X 15w-40 oil as the fill....again, I was advised that it was a " keying" error and I was actually filled with Shell Helix 5w-30 . Certainly was not confidence inspiring stuff
You would like to think that Ford Service( paying the" extra" for that specialist training and expertise was the way to go !) Sadly....NO!!!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2011, 04:45 PM   #67
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Yep, also already having an issue, its done this to me twice so far.

Sometimes, seems to happen randomly, when I go to start the car, I let it sit with ignition on until snowflake goes orange, red then disapears, when I go to start it after the snowflake goes away, it just wont start, sometimes it will crank over a few times and fire right up, other times, keeps cranking and wont start, second go it works.

Its giving me the shits, done this to me twice, once at work carpark and now in my driveway. I'm going to ring up my salesman tomorrow and organise it to go in to *shudder* Ford service department.

Other than that, all good.

Also curious if i can use shell helix ultra extra 5W-30 in this as well or does it have to be especially a diesel oil? Its a group 4 synthetic that I use in my Fiesta.

Last edited by Franco Cozzo; 01-02-2011 at 04:59 PM.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2011, 09:35 PM   #68
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Big Damo
Yep, also already having an issue, its done this to me twice so far.

Sometimes, seems to happen randomly, when I go to start the car, I let it sit with ignition on until snowflake goes orange, red then disapears, when I go to start it after the snowflake goes away, it just wont start, sometimes it will crank over a few times and fire right up, other times, keeps cranking and wont start, second go it works.

Its giving me the shits, done this to me twice, once at work carpark and now in my driveway. I'm going to ring up my salesman tomorrow and organise it to go in to *shudder* Ford service department.

Other than that, all good.

Also curious if i can use shell helix ultra extra 5W-30 in this as well or does it have to be especially a diesel oil? Its a group 4 synthetic that I use in my Fiesta.
Damo, No.Doesn't have to be a specific Diesel Oil...In
the TDCI, same oil as the petrol version I believe...Personally, In have gone for the Castrol 0-40w Fully Synthetic , which seems to comply with everything!! There are probably much better oils out there...however ..they need to be researched very carefully....I believe that the Castrol 0-40w Synthetic meets this criteria!!!!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2011, 09:37 PM   #69
elgreko
Regular Member
 
elgreko's Avatar
 
Join Date: Mar 2009
Location: Greenvale
Posts: 131
Default Oils

I use mobile 1 full synth 5-30 dosnt smoke any more. I have been told that the ford oil is crap and most of the time they dont put in the proper oil!!! Together with the tunit chip and K&N filter runs great!!!
__________________
MY BABY!!!
http://vantagestarcars.com.au/modules/friendfinder/members/uploads/1/1252391699_SL375562.jpg
elgreko is offline   Reply With Quote Multi-Quote with this Post
Old 01-02-2011, 09:59 PM   #70
WILDB
FF.Com.Au Hardcore
 
WILDB's Avatar
 
Join Date: Dec 2006
Posts: 1,320
Default

You need to make sure that the correct oil is used, I've seen situations in them before where incorrect oil and lack of servicing has led to particulate filter failure.
WILDB is offline   Reply With Quote Multi-Quote with this Post
Old 02-02-2011, 04:10 PM   #71
Marlboro2728
Regular Member
 
Marlboro2728's Avatar
 
Join Date: Aug 2009
Location: Kilmore
Posts: 39
Default

So do the TDCi's have a particle filter (LV Mk1)? I read the new Peugeot RCV needs its particle filter replaced at 160,000kms. If our engine is a peugeot engine like stated further up in this thread, are we in the same boat?
Marlboro2728 is offline   Reply With Quote Multi-Quote with this Post
Old 02-02-2011, 05:03 PM   #72
Turbodiesel
Torquer
 
Turbodiesel's Avatar
 
Join Date: Jul 2007
Posts: 393
Default

Quote:
Originally Posted by Marlboro2728
So do the TDCi's have a particle filter (LV Mk1)? I read the new Peugeot RCV needs its particle filter replaced at 160,000kms. If our engine is a peugeot engine like stated further up in this thread, are we in the same boat?
The early 2007 models do not have a particulate filter, I think they started incorporating them in the 2008 models and onward.
Turbodiesel is offline   Reply With Quote Multi-Quote with this Post
Old 02-02-2011, 05:47 PM   #73
Dustproof
Regular Member
 
Dustproof's Avatar
 
Join Date: Sep 2009
Posts: 131
Default

Quote:
Originally Posted by Big Damo
Also curious if i can use shell helix ultra extra 5W-30 in this as well or does it have to be especially a diesel oil? Its a group 4 synthetic that I use in my Fiesta.
Yes, most definitely use Diesel grade oil. Some Unleaded fuel oils are coming up to the level that they are equal with Diesel but quite there yet. Read the container and it will say if it is suitable for Diesel engines.

The Focus needs a low ash type oil if your car has a particulate filter, if you use any other oil, you risk the filter clogging up which can reduce the life of the filter which can be expensive to replace. If you don't have a particulate filter, then normal diesel oil is fine.

Anyone doing their own servicing should make sure they use the correct filter (Not necessarily Ford branded), make sure the filter cap is torqued down to the correct tension and change the filter every service. If you are going to change the fuel filter, make sure you have the correct tools to bleed the system before attempting the change. In the major service, there is a requirement to replace some fluid that is for the particulate filter, this apparently (So the book say's) is only done by Ford - go figure!!

Any truck driver will tell you, the secret to longevity in a diesel engine is changing filters frequently, personally I change the oil and filter every 7,000km, about 1/2 the normal service cycle.

__________________
1400 GTR Goes like it has a Kwaka up its butt
Dustproof is offline   Reply With Quote Multi-Quote with this Post
Old 02-02-2011, 06:57 PM   #74
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Turbodiesel
The early 2007 models do not have a particulate filter, I think they started incorporating them in the 2008 models and onward.
Yeah, Thats correct...mine is a 2007 Model, so no DPF is fitted...Came with the 2008 Model, and yes....A study of the Oil Manufacturer sites with clarify the oil required if you have a Particulate Filter fitted . For a period, I used Penrite Diesel 5, which is a 5w-40 Oil safe for the TDCI Common Rail Injected engines...I was very confident in using this particular Oil.....however....Not suit able for DPF models.....All the best !! Getting ready to ride out the Cyclone hitting Cairns area tonight.......Wish me luck!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 04-02-2011, 01:57 PM   #75
DeKa
Regular Member
 
Join Date: Jul 2006
Posts: 149
Default

Peugeot recommend the same oil in both their petrol and diesel engines: Total Quartz Ineo ECS 5W30 - http://www.peugeot.com.au/media/deli...305-df583b.pdf

They make the diesel engine in the Focus so maybe that would be the best oil to use.
The engine is the DW10BTED4 and depending on your Focus' year model it may or may not have a Diesel Particulate Filter (DPF) or FAP.
DeKa is offline   Reply With Quote Multi-Quote with this Post
Old 04-02-2011, 04:05 PM   #76
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

I think mine does, its a 2010 model, LV MKI. where is this particulate filter located? Is there any way I can remove it?

Also hope you came out well Chicka.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 07-02-2011, 08:45 PM   #77
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Big Damo
I think mine does, its a 2010 model, LV MKI. where is this particulate filter located? Is there any way I can remove it?

Also hope you came out well Chicka.
Goodonya Big Damo....back on line at last...lost power at home for almost 4 days
Not too bad considering what some poor buggers are trying to contend with!
The cyclone hit hardest about 150 ks south of Cairns ( where I live)...I just had a big tree clean-up to contend with...bugger all really.Anyway Damo...not sure where the DPF is fitted in the TDCI...so I am no help mate !
Will be in touch though !!!! and thanks for your thoughts!!!
We TDCI boys gotta stick together !!
Regards Chicka!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 07-02-2011, 09:38 PM   #78
marg99
FF.Com.Au Hardcore
 
Join Date: Jul 2008
Location: Melbourne
Posts: 804
Default

The Particluate filter is usually in the engine pipe (the exhaust bit from the engine to the cat converter) with a sensor either side of it to measure pressure. When it starts restricting exhaust flow its time for the engine to burn it clean.
My 07 build TDCI came without the little bugger for which I am glad.
marg99 is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2011, 10:58 AM   #79
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Still trying to run it in, i havent been driving it, NZ, old man driving me to work until my sleeping pattern fixed, now im at TAFE using trains......

Grr. Next week it should be getting driven again.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2011, 04:57 PM   #80
Turbodiesel
Torquer
 
Turbodiesel's Avatar
 
Join Date: Jul 2007
Posts: 393
Default

Well boys I've been enquiring about some chips... I get absolutely no response from Spider, be it the UK site or Australia, DPChip didn't respond to my email either.

The only response I've had is from Tunit which is apparantly a similar unit to DPChip. They quoted me $1280 plus $15 postage.

They also gave me a list of suppliers in my area so I just called one of them and asked me to get a quote as well.

So Chicka you can really feel the difference huh? I remember reading someone else's post saying it wasn't worth it but you sound happy with your purchase.
Turbodiesel is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2011, 11:43 PM   #81
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

I emailed code:RED a few weeks ago and I recieved no reply. Damn them, damn them to hell!

Anyways European-Parts is an authorised dealer for Code:RED so I'm going to enquire through them, maybe they might reply to me.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 12-02-2011, 02:13 PM   #82
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Turbodiesel
Well boys I've been enquiring about some chips... I get absolutely no response from Spider, be it the UK site or Australia, DPChip didn't respond to my email either.

The only response I've had is from Tunit which is apparantly a similar unit to DPChip. They quoted me $1280 plus $15 postage.

They also gave me a list of suppliers in my area so I just called one of them and asked me to get a quote as well.

So Chicka you can really feel the difference huh? I remember reading someone else's post saying it wasn't worth it but you sound happy with your purchase.
Yeah, for sure..as I previously said, I have no figures to back it up, but the" seat of the pants" feeling in great as far as I am concerned! I am surprised that the DP people haven't responded! I Found their service excellent ! I know its a lotta cash , but I'm certainly happy with the purchase ! Even the induction sound from inside the car is great
Sounds and runs like a very flexible petrol driven vehicle...and smooth too !!!
Hope you make the right decision !!!!!All the best !!!
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 12-02-2011, 05:34 PM   #83
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

I might look into the DP one, should I run in the car first before I go for something like that or F it?

I was thinking of putting about 3000km on the car before I went for any performance mods.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 12-02-2011, 10:05 PM   #84
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Quote:
Hi

of course the intercooler makes a good benefit in torque and power because the OEM one is very restrictive.

We have already supplied many of these to the MK2 owners with the 2.0 TDCI. I would more over recommend the chiptuning software for the 2.0 rather than the module.

Mit freundlichen Grüßen
Best regards

Sascha Mayer
Sounds good
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2011, 06:56 PM   #85
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Got a good update for you all when i get home:

Picture tells a thousand words

Last edited by Franco Cozzo; 14-02-2011 at 07:01 PM.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2011, 10:32 PM   #86
In Focus
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: W.A.
Posts: 1,713
Default

I've seen your other post, Damo. Glad you're ok. And glad I got my Mrs into a five-star safety LX Fiesta. Worth the extra money over the 4 star CL for a situation like that.
__________________
His: 2019 Ford Focus SA Trend with Driver Assist Pack: 1.5 Ecoboost 3-cylinder (yes, 3 cylinders!), 8-speed automatic in Ruby Red.

Hers: 2020 Ford Puma JK: 1.0 Ecoboost 3-cylinder, 7-speed DCT in Frozen White.
In Focus is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2011, 11:00 PM   #87
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Quote:
Originally Posted by In Focus
I've seen your other post, Damo. Glad you're ok. And glad I got my Mrs into a five-star safety LX Fiesta. Worth the extra money over the 4 star CL for a situation like that.
Damn right, I escaped serious injury thanks to modern technology.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2011, 07:30 PM   #88
Chicka
Regular Member
 
Join Date: May 2008
Location: North Queensland
Posts: 36
Default

Quote:
Originally Posted by Big Damo
I might look into the DP one, should I run in the car first before I go for something like that or F it?

I was thinking of putting about 3000km on the car before I went for any performance mods.
Hi again Big Damo....With regard to the fitting of a DP Chip,I believe that fitment from day 1 is not a problem.Actually, The owner of the Diesel Specialists place near me fitted a Steinbauer Chip on his vehicle at about 1000kms. It was a brand new Jeep Cherokee . The Steinbauer chip is ,I think, about $ 2500.00 ...but it is connected to each individual injector, and is apparently more sophisticated than most other available tuning chips.These Diesel boys next door seem to reckon that " drive it like you stole it" is the way to go with the modern common rail diesels..( Within reason , of course).Let's hope the're right !!!!
Chicka
Chicka is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2011, 08:56 PM   #89
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,513
Default

Quote:
Originally Posted by Chicka
Hi again Big Damo....With regard to the fitting of a DP Chip,I believe that fitment from day 1 is not a problem.Actually, The owner of the Diesel Specialists place near me fitted a Steinbauer Chip on his vehicle at about 1000kms. It was a brand new Jeep Cherokee . The Steinbauer chip is ,I think, about $ 2500.00 ...but it is connected to each individual injector, and is apparently more sophisticated than most other available tuning chips.These Diesel boys next door seem to reckon that " drive it like you stole it" is the way to go with the modern common rail diesels..( Within reason , of course).Let's hope the're right !!!!
Chicka
Interesting, thanks much for all your feedback, but now I have to wait until insurance delivers me my new car, if they can get another in the same colour and manual:







Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2011, 07:12 PM   #90
Turbodiesel
Torquer
 
Turbodiesel's Avatar
 
Join Date: Jul 2007
Posts: 393
Default

Holy crap, what the hell happened there Damo?!
Turbodiesel is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:21 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL