![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1141 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
![]() The two drying towels I grab the most at the moment are the Rag Company FTW's and their Gauntlet. ![]() Which one you choose will be down to how you dry your car. If you use a blower to remove water before using a towel, the smaller FTW's are going to be up your alley. You will probably need 2 - 4 depending on your needs. https://carcareco.com.au/product/the...l-40cm-x-40cm/ ![]() The Gauntlet is made in several sizes. I have the small 30x30cm for wheels, and use the medium 38x60cm for drying. There are also larger sizes if you want to dry without using a blower. https://carcareco.com.au/product/the...-drying-towel/ ![]() Both of these are twist loop towels but are much nicer to use than the Supercell. Another towel I like is the Tempest JNR from Waxit, the smaller version though. This is similar to the Big Green Sucker, but in a more manageable size. https://www.waxit.com.au/products/te...ant=1102839984 ![]()
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
3 users like this post: |
![]() |
#1142 | ||
Regular Member
![]() Join Date: Nov 2008
Location: Sydney
Posts: 908
|
A weekend of paint correction and detailing of a 1996 Commodore that’s never been touched. Loads of scratches/ swirls and stone chips. Thanks to Shinemate Ex610 and a variety of products to get to this stage ( much left to do but she’s in better shape than 3 days ago)
![]() ![]() ![]() ![]() Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
![]() |
![]() ![]() |
![]() |
#1143 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
![]()
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1144 | ||
Regular Member
![]() Join Date: Nov 2008
Location: Sydney
Posts: 908
|
Yep - the DA polisher worked a treat - got a lot of swirls and scratches out of the paint. The bonnet is a bit of a mess though - looks like some heavy staining and stone chips - might get this resprayed - did my best and quite happy with the outcome - thanks for creating this post and content- it’s been very useful in this project Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
![]() |
![]() ![]() |
![]() |
#1145 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,640
|
Which product and pads did you use to achieve that excellent result?
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
||
![]() |
![]() ![]() |
![]() |
#1146 | |||
Regular Member
![]() Join Date: Nov 2008
Location: Sydney
Posts: 908
|
Quote:
All from Waxit - Shinemate DA polisher and Scholls compounds. Had to hit it with a heavy cut to eliminate 26 years worth of swirls and scratches- but the effort was worth it Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
|||
![]() |
![]() ![]() |
![]() |
#1147 | ||
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 6,891
|
Add me to the list of those not impressed with the big green sucker. If I bought it at full price I would really feel like a big sucker. Mine now just spreads water rather than absorb. I have to go over the same spot 3 times to get it somewhat dry. I find drenching it, then wringing it, then wiping to be more effective than just wiping when the towel is dry. Why is that?
It does hold water well when it absorbs. I can do a whole sedan and only have to wring it once. Keen to give the waffle weave towels a go. Can you use ANY waffle weave towel? Target has the waffle cotton bamboo bath towels going for $18 ![]() I was looking at those waffle weave towels on the detailingshed.com.au, but the shipping costs more than the product ![]()
__________________
~~~~~~~~~~~~~~ Rides (past and present) Current: 2004 Ford Falcon 5.4L 3v Barra 220, Manual Past: Mitsubishi Sigma (m), Toyota Seca (m), Toyota Seca SX (m), Toyota Vienta V6 (m), Toyota Soarer 4L v8 (a), BA XR8 ute (m), T3 TE50 (m), BMW Z4 (m) AFF motto - If contrary views trigger, please use ignore button. ![]() |
||
![]() |
![]() ![]() |
![]() |
#1148 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
A couple of suggestions regarding using these sort of towels. 1/ Microfiber drying towels are used differently to what many would be used to coming from a Chamois. For best results, use one towel to absorb the bulk of the water, then follow up with a smaller second towel to remove any residual water. This way you are not fighting against the one towel expecting it to remove water and leave the paint completely dry. You will spend more time attempting to do it with one towel and/or trying to wring it out over and over. 2/ The easiest way to remove water after a wash is to use a leaf blower or a hand held tradesman's blower to drive the bulk of the water from the surface. Again, the time used to do this is then saved by not having to use multiple towels or wringing out a chamois. Using this method, I can dry an entire car with one small 40x40xm towel. 3/ Use a drying aid! This provides lubrication, provides something to "prime" your drying towel to help with absorption and also, in some cases, can help water to "flash" off which helps avoid streaking. I would also recommend watching these two video's to see what I mean by using drying aids, combined with the two towel method - Skip to the 10.00 min mark - Skip to the 6.00 min mark -
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
![]() |
#1149 | |||
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 6,891
|
Quote:
![]() Leaf blower, what a great idea!! ![]() ![]()
__________________
~~~~~~~~~~~~~~ Rides (past and present) Current: 2004 Ford Falcon 5.4L 3v Barra 220, Manual Past: Mitsubishi Sigma (m), Toyota Seca (m), Toyota Seca SX (m), Toyota Vienta V6 (m), Toyota Soarer 4L v8 (a), BA XR8 ute (m), T3 TE50 (m), BMW Z4 (m) AFF motto - If contrary views trigger, please use ignore button. ![]() |
|||
![]() |
![]() ![]() |
![]() |
#1150 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 2,639
|
I don’t mind the big green sucker. But I usually use one smaller towel to move the bulk of the water off.
I then use After Glow as a drying aid on the big green sucker and it works pretty well. A proper blow dryer is on my shopping list though. Maybe 2022 will be the year. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1151 | ||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Yes, you would probably want to be mindful of that. Once you have done it a few times, you will get the hang of doing it efficiently and safely. Work top down, driving the water across and down the panels. Also good for drying tyres prior to dressing.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
![]() |
![]() ![]() |
![]() |
#1152 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
For perspective, I started out at age of 14 using a Meguiar's Chamois. ![]() I moved to the blue Waxit waffle weaves when my XR6 arrived in mid-2008. ![]() I then transitioned to the plush Tempest and BGS towels. ![]() ![]() I'm now using mostly twist-loop microfiber towels as pictured a few posts back.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
![]() |
#1153 | ||
Regular Member
Join Date: Nov 2012
Posts: 283
|
What is this bead maker he talks about ?
|
||
![]() |
![]() ![]() |
![]() |
#1154 | ||
Cannonballin'.
Join Date: Jan 2006
Location: Bendigo, Vic
Posts: 853
|
It's a spray on, wipe off sealant. But it's bloody awesome, I'm about to do an order for a bulk pack after almost finishing off my first bottle.
Basically, whatever wax/ceramic/graphene coating you use (or even don't use at all) it goes on over the top of it- best way to describe it is that it "boosts" whatever you've got on there. I use it on paint, black plastics, wheels, glass, pretty much everything. Matt from Obsessed Garage can often come off as borderline eccentric, and his monotone can be a bit hard to properly enjoy his videos sometimes- but he calls a spade a spade and he knows his stuff. and his reaction to Bead Maker was the reason why I pulled the trigger on a bottle in the first place.
__________________
Project: 1999 Futura, 1985 Mazda Traveller, 1977 Holden HX Kingswood
Sold: 2007 XR8 Rip Curl Edition Ute Sold: 2003 Fairmont Ghia Sold: 1991 LTD |
||
![]() |
![]() ![]() |
![]() |
#1155 | ||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
As mentioned, Bead Maker is a spray sealant mostly used as a drying aid. I also use it when I detail other peoples cars, it's a very quick and easy way to add protection and gloss.
https://www.detailstore.com.au/produ...99fe5f90&_ss=r https://detailingshed.com.au/product...18399576195129 https://carcareco.com.au/product/bea...nt-protectant/ ![]() I was late to the Bead Maker train, but it has become a staple in my cabinet.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
![]() |
![]() ![]() |
![]() |
#1156 | ||
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
I use the bowdens bead master as it works nicely.
Now you guys mention it, the last time i used the big green sucker i used boss gloss at the same time, and it made it work a lot better than i remember it. Must help. |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1157 | ||
T3/Sprint8
![]() Join Date: Jan 2005
Location: Australia
Posts: 16,334
|
big sucker is ok once all nice and wet BUT its a bugga to ring out - I agree with DFB very cumbersome.
I think the last time I wasn't getting a good SUCK from the big sucker it needed a a good machine wash, then its performance was good again.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" Last edited by FTE217; 07-02-2022 at 04:45 PM. |
||
![]() |
![]() ![]() |
![]() |
#1158 | ||
FF.Com.Au Hardcore
Join Date: Jan 2019
Posts: 575
|
I'm half way through washing my i30, using water, Safeway home brand laundry soap (I think it's Velvet soap in a Safeway box) and an old sock and I also used a bit of degreaser to remove some sticker goo from the rear windscreen. It's been a long time since I washed the whole car ... will I finish it today?
[I have owned the car since new, Dec 2007] I'd love to have a really nice car but I couldn't do the detail cleaning that many of you do. |
||
![]() |
![]() ![]() |
![]() |
#1159 | ||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
A nice surprise was waiting for me when I got home this afternoon........
![]() ![]() ![]() I said this in my thread but just can't understand how a package from the USA can arrive in less than 7 days but I am still waiting for a set of pet clippers to arrive from Sydney after 30 days? ![]() Product reviews are here for those interested - https://www.fordforums.com.au/showpo...postcount=1608
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
![]() |
![]() ![]() |
2 users like this post: |
![]() |
#1161 | ||
2003 BA Falcon XT
Join Date: Jun 2008
Location: Wyndhamvale, Victoria
Posts: 1,138
|
Interesting with the Big Green Sucker. I've had mine since 2018 and still works like new. As someone said you need to prime it with something like Boss Gloss. 6 sprays on each side is perfect.
I used it today on my partners new car without priming it.... And yeah it was garbage for a while till it got wet. I'm washing my partners new 2018 Santa Fe that was a country car and apart from when it was serviced it was never washed. Two washes down and I have the exterior to a manageable level. I used a stint wash consisting of CT-18 Truck Wash and a lot of Meg's Super Degreaser, used both through a combination of a snow foam and sprayed directly onto the paint. Lots of brushing, lots of washing and a final quick coat of Bowden's Own Happy Ending to temporarily provide some protection. It's being used a lot to the end of April, where I'll apply some proper protection. Currently sits on 233,600km. Haven't got round to the engine bay. The grime is pretty bad so not sure if degreaser alone will cut it. Will have to see! I'm not overly confident about spaying water in the engine bay. Still from where it was.... Grime on the paint, inbetween the panels, hundreds of bugs.... It's a huge improvement. Decontamination, clay, polish and it'll come up alright!! ![]() ![]() ![]() ![]() Also I tried the Repco Eclipse range of wheel cleaner. Works brilliantly!! I usually take more pictures during the process, but it's been so hot just wanted to get this done. My partners mum passed away recently, so it's clocking up up even more milage, then we have to to Adelaide in April.
__________________
2003 BA Ford Falcon XT IMPCO LPG Vapour Injection. DETAILING Meguiar's NXT Car Wash Collonite #845 Insulator Wax Bowden's Own Happy Ending & Fully Slick Chemtech CT-18 Truck Wash (Wheels & Chassis) Bowden's Own Wheely Clean & Tyre Sheen Bowden's Own Three Way Paint Decontamination Spray OILS AND FILTERS Nulon Full Synthetic 10w-40 Nulon Long Life Coolant Ryco Oil & Air Filters My Instagram Account: @ba_falcon2003
|
||
![]() |
![]() ![]() |
![]() |
#1162 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
I once had a delivery from Detailing Shed sent with Fastway. For where I am, the default is for it to be sent to the Bendigo depot, then moved out via courier to other regional towns. I received an message from Fastway that my delivery was attempted, it was certainly not, and that if I did not personally drive 2 hours to pick it up from the depot, would be discarded. After consulting with Detailing Shed and others, there was pattern of similar instances where parcels were opened and if something appealed, were declared not suitable for delivery and then kept or on-sold. In the end, the poor guys at Detailing Shed had to pay another courier to pick it up from the depot and deliver it to me, they would not have made any profit on that sale. On delivery, it was clear the box had been opened. So now, I'm waiting to see if or when I will actually get what I ordered.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1163 | |||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,640
|
Quote:
I have my eye on a few of their products and might try a few soon as my stuff runs out. They are Australian made so worth a shot. Just have to wait for 25% off promos. They have bulk size bottles on some of the items too.
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1164 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
Once you have it cleaned and the APC/Degreaser rinsed off, spray the the engine bay with Meguiar's D170 Hyper Dressing. This stuff is self leveling so can be sprayed on liberally and left to dry. The following day, give it a quick wipe over if needed. https://www.repco.com.au/en/car-care...032/p/A5576809 Have a look at these two video's on Hyper Dressing and Engine Bay Detailing. Now, he go's full on with water and foam, something I'll leave up to you to decide. The method of using brushes ect is the same though. https://www.youtube.com/watch?v=JS0Gy_ufyMA&t=5s
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1165 | |||
Former BTIKD
![]() Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
|
Quote:
Seeing as Repco is now owned by a Seppo company and the wording on their site just says "specifically tailored to harsh Australian and New Zealand conditions" it wouldn't surprise me if they're made offshore ![]()
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
|
|||
![]() |
![]() ![]() |
![]() |
#1166 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
https://www.waxit.com.au/collections...ers-and-dryers https://detailingshed.com.au/collect...yers-blowers-1 I have the Big Boi Pro 4 - ![]() There is also an updated version called the Pro+ with a longer hose and remote controls located on the hand grip. https://detailingshed.com.au/collect...gboi-blowr-pro ![]()
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1167 | |||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 2,639
|
Quote:
Do you use yours? Or do you just grab a leaf blower because it’s easier? |
|||
![]() |
![]() ![]() |
![]() |
#1168 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
The smaller outlet housing focuses the air better and makes it more efficient at driving water off the paint or from behind mirrors and grills. In cooler weather, the heating function speeds the evaporation of water...........and keeps your hands warm. Some don't like the hose and cord aspect but I adapted quickly and would not be without one now. That said, unless you really like to detail your car, or are doing many cars each week, a good leaf blower is more than sufficient. If you do decide to get one, I would say just get the biggest one to maximize the effectiveness.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten Last edited by DFB FGXR6; 08-02-2022 at 05:26 PM. |
|||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1169 | ||
Starter Motor
Join Date: Feb 2022
Posts: 12
|
Hi DFB,
I've been lurking these forums for a while and your detailing knowledge is one of the main reasons I decided to make an account. Love your collection of cars too! Is there anything I can use to get hard water marks off glass? I seem to remember something about this contained in your Show N Shine thread but I can't for the life of me remember what page this was on. Thanks! |
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#1170 | |||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
Quote:
As I have mentioned in the past, glass polishing takes a different approach to paint. Normally with paint, you would start with the least intrusive method and work up from there. Glass on the other hand is much harder and requires more aggressive compounds to see an effective difference. First of all though, you could try a water spot remover such as CarPro Spotless. These sort of acidic chemicals help to break down the mineral deposits that have caused the spotting. You can also make you own by mixing water and white vinegar 50/50. https://www.waxit.com.au/collections...ver-50ml-500ml If you have no luck with that, you are then going to need to polish the glass. Any polishing compound with decent levels of cut can be used, however CarPro CeriGlass is what you want. CeriGlass is specifically designed for the harder surface glass presents. It is available in kit form or by itself. https://www.waxit.com.au/products/ca...r&_ss=e&_v=1.0 https://www.waxit.com.au/collections...rpro-ceriglass I would recommend the kit as it includes a hand applicator which you will definitely need. Even if you decide to use a machine polisher, the hand applicator is able to get into the edges of side windows that a polisher wont. I would also say to order some Rayon glass pads, these are better at managing heat, important when dealing with glass, and are much thinner a traditional polishing pad. https://www.waxit.com.au/collections...-velcro-75-130 ![]() ![]() You will also want to tape around the glass to prevent ruining the rubber trims. ![]() ![]() Polished glass is wonderful, you will be surprised at how much rubbish is bonded to the glass over time.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
![]() |
![]() ![]() |