Bluepower Blower release imminent..... - Page 4

XRQTOR · 27-05-2007, 01:16 PM

Quote:

Originally Posted by nzstuart

Still waiting for the final costs but I'm very very interested....

http://www.fordforums.com.au/showthread.php?t=100549

**data_mine** · 27-05-2007, 03:12 PM

So what sort of drive line issues should one expect with this setup?

CV's ?
Diff?
ZF 6spd?
Greatly inflated tyre budget?

WASP · 27-05-2007, 03:29 PM

Quote:

Originally Posted by data_mine

So what sort of drive line issues should one expect with this setup?

CV's ?
Diff?
ZF 6spd?
Greatly inflated tyre budget?

Lol, all of the above. You'll get that with any blown set up! Seriously on a 6 psi set up and common sense driving everything you have currently have 'should' hold up ok....for a while anyway.

Nice work Chris.

VooDoo · 23-07-2007, 11:17 PM

These Opcom Autorotors are also available for the Holdens now too. VERY good twin screw blowers and anyone that buys one will be very happy.

Craig · 23-07-2007, 11:26 PM

Quote:

Originally Posted by VooDoo

These Opcom Autorotors are also available for the Holdens now too. VERY good twin screw blowers and anyone that buys one will be very happy.

Don't think there will be too many people interested in Holdens here bud......

VooDoo · 23-07-2007, 11:35 PM

lol, i know that. Just showing my support for this brand of blower. They are much better than the whipples. I like the fords too and its good to see ppl innovating and not using the same things over and over (Vortechs, whipples etc)

Here's mine in any case. We use an air to air intercooler rather than water to air.

rodderz · 23-07-2007, 11:39 PM

Got rid of tuna's turbo out of the barge voodoo? Did you find the s/c better than the turbo or was there another reason?

DOC · 23-07-2007, 11:39 PM

Quote:

Originally Posted by VooDoo

lol, i know that. Just showing my support for this brand of blower. They are much better than the whipples. I like the fords too and its good to see ppl innovating and not using the same things over and over (Vortechs, whipples etc)
Here's mine in any case. We use an air to air intercooler rather than water to air.
[]

Here we go again

Matt_J · 24-07-2007, 08:21 AM

Quote:

Originally Posted by VooDoo

They are much better than the whipples. I like the fords too and its good to see ppl innovating and not using the same things over and over (Vortechs, whipples etc)

how are they better?

10.3 at 138mph with basically no intercooler

Matt.

Matt_J · 24-07-2007, 08:56 AM

Quote:

Originally Posted by VooDoo

These Opcom Autorotors are also available for the Holdens now too. VERY good twin screw blowers and anyone that buys one will be very happy.

Hey Voodoo, its Opcon not Opcom....

no, it wasnt a typo.

:

XRQTOR · 24-07-2007, 09:27 AM

Quote:

Originally Posted by VooDoo

lol, i know that. Just showing my support for this brand of blower. They are much better than the whipples. I like the fords too and its good to see ppl innovating and not using the same things over and over (Vortechs, whipples etc)

Here's mine in any case. We use an air to air intercooler rather than water to air.

Those #'s in your sig correct, 34orwkw from a 4o8 stroker with a blower.

**Bluepower** · 24-07-2007, 11:29 AM

Quote:

Originally Posted by MattJ@Yella Terra

how are they better?

10.3 at 138mph with basically no intercooler

Matt.

There is no substitute for a top mount blower - i recall your Monaro running pretty hard with the Whipple on it, a brutal set-up.

At the time in the LS1 scene, a very stout achievement indeed, and even now few TT LS1's can claim a low 10 sec slip.

As they say, timeslips do tell the story.

:

Matt_J · 24-07-2007, 12:01 PM

Quote:

Originally Posted by Bluepower

There is no substitute for a top mount blower - i recall your Monaro running pretty hard with the Whipple on it, a brutal set-up.

At the time in the LS1 scene, a very stout achievement indeed, and even now few TT LS1's can claim a low 10 sec slip.

As they say, timeslips do tell the story.

:

Yeah, thanks Chris. At that time it was the fastest LS1 in the country and really made the other supercharger 'pushers' eat there own words especially since it was still with the std 5.7 litre bottom end. It was eclipsed by Daniel Collins from Chipmaster in W.A. with another Whipple supercharged Monaro, with a 10.22 at 139 if i remember rightly... not bad for a 2.3 litre Whipple on a 383 stroker LS1. Both street cars too!! To run 10.2 now with the budget TT kits requires the absolute gutting of all gutting, allbeit with semi standard engines.

Matt.

FalKeen · 24-07-2007, 06:09 PM

AU suitable or similar to what BPT is already offering?

**Bluepower** · 25-07-2007, 10:07 AM

Quote:

Originally Posted by FalKeen

AU suitable or similar to what BPT is already offering?

Not AU suitable. Completely different to the BPT setup.

Chris

VooDoo · 26-07-2007, 07:54 PM

Quote:

Originally Posted by XRQTOR

Those #'s in your sig correct, 34orwkw from a 4o8 stroker with a blower.

Nope, that was a stroker in the barge NA.

In my opinion (and Lysholms too) the Autorotor is more efficient than the whipple. Again ppl read with angry eyes. Nobody has said the whipple is crap, far from it. Bluepower has done awesome things with the autorotor and has proven its worth beyond doubt.

BTW matt, Opcom was a typo.

XRQTOR · 26-07-2007, 07:58 PM

Quote:

Originally Posted by VooDoo

Nope, that was a stroker in the barge NA.

In my opinion (and Lysholms too) the Autorotor is more efficient than the whipple. Again ppl read with angry eyes. Nobody has said the whipple is crap, far from it. Bluepower has done awesome things with the autorotor and has proven its worth beyond doubt.

BTW matt, Opcom was a typo.

Ok sweet, thought it seemed a bit low. What sort of power is it making with the blower on it now.

Matt_J · 27-07-2007, 09:34 AM

Quote:

Originally Posted by VooDoo

Nope, that was a stroker in the barge NA.

In my opinion (and Lysholms too) the Autorotor is more efficient than the whipple. Again ppl read with angry eyes. Nobody has said the whipple is crap, far from it. Bluepower has done awesome things with the autorotor and has proven its worth beyond doubt.

BTW matt, Opcom was a typo.

I will let this go cause im a grown up now....

Ok, almost... I have seen and read the comparison done by Lysholm. The comparison was performed on the original Whipple Charger. The new Whipple Charger (now made completely in the USA) is much more efficient than the old unit, as tested by Whipple themselves and details can be seen on the Whipple website.
http://www.whipplesuperchargers.com/...sp?ProdID=1162
If your opinion in based on the Lysholm comparison it is now in-valid. I would be interested in testing you have done to compare the two.

The Autorotor is a very good unit, I had a 2.4 litre unit on my first LS1 Monaro way back in 2002, that later got stolen in Perth, and it was a really nice thing. It made over 400kw at the wheels.

Stu, having any problem with the throttle body being so far away from the engine?

Regards.

JAYBA · 09-08-2007, 01:49 PM

what would an approx price on a non intercooled and intercooled kit cost on a ba xr8
what sort of rwkw could i expect(safely)
and is there somewhere in wa that could fit?

Rooster · 20-08-2007, 09:38 PM

Chris,
mate, thanks heaps for today! the ute has really cemented the argument for the diff gears. I'll put the suggestion up to get you involved in the new project, will know by 13 Sep. And i'll get you the name for the PR rep to see if you can't get some decals on the ute flogginh the trades and some $$$. Will be good to see what numbers those cams get in the Ghia. And possibly change the pacemakers to DiFillipo. 3.7, 4.11 gears, should be laughing for solid 12's. Got those specs i was crapping on about, pretting sure Craig has the same book.
the kenne bell on their 5.4L 4V @ 19.5 psi pushed 704hp / 6500rpm
then they threw this together.

Richard Holdener
5.4L 4 Valve
Steel Rods
Forged Aluminum Crank
JE Forged Pistons
11.75:1 Static Comp
Hand Ported heads
SHM Stage 3 Cams (.474 lift 235 deg duration @ 50thou)
Sullivan intake
90mm Accufab throttlebody
150lb/hour injectors
F.A.S.T. ECU
1 7/8 to 2" 4 into 1 extractors
C16 fuel
ATI F2M Blower @ 25psi
air to water intercooler

1350hp @ 7200rpm and 1028ft-lbs @ 6500rpm

thanks again for today Chris, catch ya when i'm down next

cheers
Ben

XRMATE · 31-08-2007, 08:30 PM

hi guys, i am interested in purchasing 1 of these for my 05 ba xr8 auto, could someone pls pm me with pricing, i am just looking at running below 12.00 in street trim, in nth queensland.
and any xtras required to make the driveline reliable etc.
thanks

XRMATE · 17-09-2007, 06:02 PM

Quote:

Originally Posted by XRMATE

hi guys, i am interested in purchasing 1 of these for my 05 ba xr8 auto, could someone pls pm me with pricing, i am just looking at running below 12.00 in street trim, in nth queensland.
and any xtras required to make the driveline reliable etc.
thanks

Thanks for the chat today Chris, very helpfull.
I could be the first in NQ to have a ken belle i think

:

Jason50 · 20-09-2007, 05:32 PM

Quote:

Originally Posted by XRMATE

Thanks for the chat today Chris, very helpfull.
I could be the first in NQ to have a ken belle i think

:

You won't be the last, when others see how good the setup is

:

In fact I'm feeling the need for a drive right now...

XRMATE · 20-09-2007, 06:20 PM

With the coal boom up here there is plenty of people with cash not to mention xr8's and 6's so there is a good chance a few more will pop up.

Jason50 · 20-09-2007, 06:38 PM

The way the Blue power kit transforms these cars is awsome. The lack of torque until after 3500RPM used to anoy me every time I drove my car (04 BA XR8 auto). Just chuging around in trafic is a pleasure now, and when I get the chance to nail it, it always has the goods.

After 3 months I have not had any trouble with the drive line, though it is running 5PSI to keep things safe until I can aford to play more. Should be good for a low 12 sec 1/4.

FPV8U · 20-09-2007, 09:39 PM

Quote:

Originally Posted by Jason50

The way the Blue power kit transforms these cars is awsome. The lack of torque until after 3500RPM used to anoy me every time I drove my car (04 BA XR8 auto). Just chuging around in trafic is a pleasure now, and when I get the chance to nail it, it always has the goods.

After 3 months I have not had any trouble with the drive line, though it is running 5PSI to keep things safe until I can aford to play more. Should be good for a low 12 sec 1/4.

Don't have any Vids to share at all?

If so shoot me a PM and i'll give you my Email.

Im keen to see some Vids of these Blown Boss's :evil3:

Craig · 21-09-2007, 10:28 AM

Quote:

Originally Posted by Jason50

Should be good for a low 12 sec 1/4.

We already have a ute that runs 12.2's so your thinking is SPOT ON...

:

Jason50 · 22-09-2007, 02:12 PM

Quote:

Originally Posted by FPV8U

Don't have any Vids to share at all?

If so shoot me a PM and i'll give you my Email.

Im keen to see some Vids of these Blown Boss's :evil3:

The only vid I have is from the install on the Bluepower Dyno.

Craig, Nice to know the numbers are there, even in such a mild state of tune. Maybe next time I come up for a tickle I can take it to the track and runa number myself. Was that 12.2 with street tires ?

FPV8U · 22-09-2007, 04:28 PM

Quote:

Originally Posted by Jason50

The only vid I have is from the install on the Bluepower Dyno.

Craig, Nice to know the numbers are there, even in such a mild state of tune. Maybe next time I come up for a tickle I can take it to the track and runa number myself. Was that 12.2 with street tires ?

Can you post it up mate?

Jason50 · 22-09-2007, 05:32 PM

Sure, happy to. I'll get out the tape and get it done in the next day or so.