Hard to get bits Wanted or For Sale

[xacoupeking]

Im pretty sure i can arrange transport so how much do you want for doors and boot.

[Donny]

xacoupeking, PM sent.....

To all the others asking about my coupe spares, give me a few days to make a list and I will get back to everyone with what I have.

[Donny]

Ok guys, had a quick look at what I had lying around. This isnt everything by a long shot, but covers some of what I have been getting PM's about.

First the doors....XA coupe doors. 2 right doors 1 left door. RH door 1 has a good frame and striker area, but the skin isnt great at all. RH door 2 is in good overall nick, has some surface rust and a few bubbles of stuff coming up down in the lower sill area, striker ok. Nothing too ugly yet. LH door is basically the same condition as RH door 2, except there is a rust bubble in the middle of the sill instead of at the end of it, and the striker area needs fixing. Can use either the spare door shell or I can supply a good striker repair section to weld into place. All the doors are easily repairable.

Boot....standard coupe bootlid. will need to be paint stripped and has a few older repairs in the end bit that goes over the tail lights. part of the skin has some filler in it. I dont know how deep, I got another bootlid, so didnt investigate further.

Stainless front left and right coupe door top trims.....These things are allmost concourse. all they need is a polish and away you go. No deep scratches at all on either, no dints, no gouges. These are an 8 or 9 out of 10 before a polish.

C pillar moulds coupe....These have been rechromed and present as best as possible. They still have the factory bubbles that you cannot remove, but present as reconditioned items. These are fairmont/gt items to suit the full length stainless trims of those models.

XA GT Guard Flutes....1 left and 1 right. 1 is definantly genuine (RHS) the other I suspect is an early repo as you can bend it about and shape it a little. Feels like lead??? solid but pliable if that makes sense. The genuine one has 2/3 pins intact the repo one none. These things are as rare as hens teeth, and a must if you are doing an xa gt front end.

Please make any queries/offers to PM so we dont clog the thread. If you want/expect me to name $$ then I will have to refer to ebay sale prices to get an idea of worth, as I dont really know their current values.
I have pics of all the above bits if anyone asks too.

Donny

[Pinkbits]

This ending soon if anyone is interested $57 at the moment.
http://cars.shop.ebay.com.au/items/C...d=p3913.c0.m24

[XBCoupeNZ]

But its in NZ

Matching numbers Mulberry metallic, white interior and factory sunroof.
Also factory air conditioning.

Nice looking car

http://www.trademe.co.nz/Trade-Me-Mo...-181434633.htm

[Big Mike]

I'm still looking for a fuel cap and ring in decent condition - not too fussed about pins or the internal plunger but the shell and latch need to be ok. Chrome or part painted not sure which I'd rather - if anyone has a spare?

Same deal for rear honeycomb - not fussed about the pins or colour but reasonable condition please, short of buying the repro gear.

[Donny]

the repo honey combs are supposed to be quite good I hear.

[GT-GTF]

Originally Posted by xagt_coupe

the repo honey combs are supposed to be quite good I hear.

I have the repo honey combs on mine. I ordered them with strong double sided tape rather than pins so I wouldn't have to drill holes in my beloved. They are excellent. I put them side by side with a coupe with genuine honey combs and couldn't spot any difference (except mine look pristine!).

[Big Mike]

I expect they are fantastic - but because I also don't want to drill holes, and because I'm doing some customizing too... I don't want to ruin a mint set and I imagine I can get away with a lot less money than buying brand spankers.

[xacoupeking]

Where can you get the repro xa gt front guard vents from as i cant really afford the real ones at the moment.

[GT-GTF]

Originally Posted by Big Mike

I expect they are fantastic - but because I also don't want to drill holes, and because I'm doing some customizing too... I don't want to ruin a mint set and I imagine I can get away with a lot less money than buying brand spankers.

I think I paid $100 for mine off ebay. The guy is based in Western Sydney and sells them on ebay all the time. I'll have photos of my finished resto up later this week (less new wheels which I'm still looking for) so you can see for yourself how they look.

[landau37]

Hi guys have a inner grille for a right hand fluke coupe ,nos pm if interested ! hope this is posted right.....

[Donny]

Originally Posted by xagt_coupe

STILL AVAILABLE....
First the doors....XA coupe doors. 2 right doors 1 left door. RH door 1 has a good frame and striker area, but the skin isnt great at all. RH door 2 is in good overall nick, has some surface rust and a few bubbles of stuff coming up down in the lower sill area, striker ok. Nothing too ugly yet. LH door is basically the same condition as RH door 2, except there is a rust bubble in the middle of the sill instead of at the end of it, and the striker area needs fixing. Can use either the spare door shell or I can supply a good striker repair section to weld into place. All the doors are easily repairable.
$200 for the lot. (very fair considering 1 good XA coupe door is worth $300+ on its own)

Boot....standard coupe bootlid. will need to be paint stripped and has a few older repairs in the end bit that goes over the tail lights. part of the skin has some filler in it. I dont know how deep, I got another bootlid, so didnt investigate further.
$50

C pillar moulds coupe....These have been rechromed and present as best as possible. They still have the factory bubbles that you cannot remove, but present as reconditioned items. These are fairmont/gt items to suit the full length stainless trims of those models.
$150 for the pair
Donny

The stuff quoted above is still available people....Some prices attached as well. Im going away to Valla for the week, leaving in the morning (Thursday 30th), so will answer any PM's when I am back.

[XB74GS]

[QUOTE=Big Mike]I'm still looking for a fuel cap and ring in decent condition - not too fussed about pins or the internal plunger but the shell and latch need to be ok. Chrome or part painted not sure which I'd rather - if anyone has a spare?

Hey Mike,
It might be my turn to help you with this one. :voldar02:
I know I've got one in the shed, so I'll dig it out & get back to you.
Cheers
Todd.

[thefargo]

I'm thinking of replacing the steering in the xb coupe with a power steering set up. Does anyone have the parts as surplus?

[Big Mike]

@ Todd - thanks!

@ thefargo - I have some of the bits, not everything; do you know what you need? Pretty sure you're kinda local too.

@ georgevlah - how's them pics coming?

[Paull]

I am chasing a coupe rear window chrome mould (will be painted black so black or chrome would be excellent) for an XC. I have a few extra door top chrome moulds (front and rear) and some C pillar moulds that I am willing to trade or pay the requested amount if any one has a set.

[cob115]

Originally Posted by Paull

I am chasing a coupe rear window chrome mould (will be painted black so black or chrome would be excellent) for an XC. I have a few extra door top chrome moulds (front and rear) and some C pillar moulds that I am willing to trade or pay the requested amount if any one has a set.

gday paul cant help you with the rear window mould ,but im intrested in buying your door moulds ,pm sent cheers pat

[DJR-351]

I know these are as rare as rocking horse $#it but has anybody got a reasonably clean/straight pair of front XA Guards they would like to sell me. : : :

[351ZF]

Got a set but I live up Townsville way.

[DJR-351]

Originally Posted by 351ZF

Got a set but I live up Townsville way.

Cheers PM sent....

[XB74GS]

G'day all,
Just wondering if someone has a V8 tail shaft to suit an XB coupe with a single rail gear box & 9 inch diff.
Not too worried about yoke or uni's.
Any help appreciated. Located in Sydney.

Thankyou
Todd

[Big Mike]

Got one that's virtually new with DANA uni's and the lot - to suit V8 single rail but with the other diff. Any use to you? Transport?

[YVA60]

Originally Posted by gtp292

Try again,

I'm looking for the chrome strip that sits on top of the drivers door for my XA GT Coupe resto.

I have 2 passenger side strips in excellent condition. Happy to swap or purchase outright.

Ta.

Did you get this? I know where there is one. How much do you want for the left side? It is door right?

[YVA60]

http://www.fordforums.com.au/showthr...5&highlight=xb

Browse this.

[RIPGMH]

Anyone have or know where to get, XA Coupe Tail light Lens? Must be excellent condition.

[Auslandau]

Second mortgage on its way!!

Unless someone here has a good set, I have only seen them appear on Ebay ...... last pair and regarded as NOS went around the $1000 mark.



| [/url] |

[cob115]

Originally Posted by georgevlah

If any one has a dash pad and auto console in vgc for sale please pm me. Prefer local Sydney but will pay postage for right item.

howdy george ,iv got dash oridgional redoing my xb dash pad ,expencive compaird to if u can get a good 2nd hand one,hard to get nowadays with out cracks ,but they do top work and make it look like factory ,they also repaire recon centre consoles factory door trims ,theyll be redoing my xc cobra door trims next year , in holden hill south aust ,webb www.dashoriginal.com.au
ph 83693000

[GT-GTF]

Originally Posted by cob115

howdy george ,iv got dash oridgional redoing my xb dash pad ,expencive compaird to if u can get a good 2nd hand one,hard to get nowadays with out cracks ,but they do top work and make it look like factory ,they also repaire recon centre consoles factory door trims ,theyll be redoing my xc cobra door trims next year , in holden hill south aust ,webb www.dashoriginal.com.au
ph 83693000

Cheers Pat. I managed to get my hands on a mint console and dash from my cousin at Fairford Spares out of an old V8 Fairmont sedan he recently bought for wrecking. They are sitting snugly in my coupe!

[Pinkbits]

Only an hour to go.
http://cgi.ebay.com.au/XB-coupe-rear-seat_W0QQitemZ140285157958QQcmdZViewItemQQptZAU_Ca r_Parts_Accessories?hash=item140285157958&_trksid= p3286.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A 1318
Damn thing won't let me copy and paste!