Genuine Ford Parts - Page 69

GTLEGEND · 17-07-2024, 03:36 PM

Quote:

Originally Posted by wickerd

Hi.I’m looking for a vrs gasket set to suit Boss 260 32v (2004 BA xr8 Ute)… any suggestions ? . I know that cheap ones aren’t necessarily good and good ones aren’t necessarily cheap .. any suggestions or advice would greatly appreciated . cheers

There used to be a genuine VRS kit for the 260 Boss,part number BAFP6079B, how ever long obsolete.

Suggest you try someone like Rocket Industries to see if there is an aftermarket equivalent through a brand like Fel Pro or the alike.

Maybe contact Herrod Performance in Melbourne who worked on this things as well.

GTLEGEND · 17-07-2024, 03:53 PM

Quote:

Originally Posted by Baminator

Howdy GT,

This may be a bit of a Hail Mary, but I'm looking for an Idle Speed Controller for my 1997 XH Falcon 4ltr. Figured it couldn't hurt to ask if any Genuine Ford NOS is still floating about, and if you even just happened to know the Ford part # that would be fantastic.

Cheers,
the Baminator

Hi mate,

More information required, GLi, Outback, XR etc? Even a VIN will help.

GT

GTLEGEND · 17-07-2024, 05:53 PM

Quote:

Originally Posted by fgpsi

Hi , GTLEGEND

Do you have or do you know where I can get some fresh airbox torx screws for the FG Falcons. Also anyone know what size they are/ part number

Cheers

Have a look below and advise which screw you are referring to. Note this is for 4.0L NA or Lpi, Turbo, V8 and earlier LPG vehicles have slightly different housings, which one are you referring to?

FG 4.0 Air Cleaner Non Turbo.png

fgpsi · 17-07-2024, 06:35 PM

Quote:

Originally Posted by GTLEGEND

Have a look below and advise which screw you are referring to. Note this is for 4.0L NA or Lpi, Turbo, V8 and earlier LPG vehicles have slightly different housings, which one are you referring to?

Attachment 107396

Thanks for the reply GTLEGEND

It's for an NA FG Mk II xr6. Looking at the image you uploaded its 9B600

GTLEGEND · 17-07-2024, 08:05 PM

Quote:

Originally Posted by fgpsi

Thanks for the reply GTLEGEND

It's for an NA FG Mk II xr6. Looking at the image you uploaded its 9B600

Part number is BG9B600C, unfortunately obsolete.

fgpsi · 17-07-2024, 08:24 PM

Quote:

Originally Posted by GTLEGEND

Part number is BG9B600C, unfortunately obsolete.

Damn that sucks . Wonder what I could use instead

GTLEGEND · 17-07-2024, 09:09 PM

Quote:

Originally Posted by fgpsi

Damn that sucks . Wonder what I could use instead

I would check out you local wreckes and get one from there, keep it all original..

gassa · 17-07-2024, 10:32 PM

Quote:

Originally Posted by fgpsi

Damn that sucks . Wonder what I could use instead

Hi Mate
I think i have a few screws if needed

Gassa

Baminator · 17-07-2024, 11:23 PM

Quote:

Originally Posted by GTLEGEND

Hi mate,

More information required, GLi, Outback, XR etc? Even a VIN will help.

GT

Yeah no worries didn't realise I'd left you high and dry for info. Just a plain old GLi running the log manifold. Not a BBM car sadly, although I thought all XH 4.0's had the same ISC?

Hope that helps.

GTLEGEND · 18-07-2024, 07:46 AM

Quote:

Originally Posted by Baminator

Yeah no worries didn't realise I'd left you high and dry for info. Just a plain old GLi running the log manifold. Not a BBM car sadly, although I thought all XH 4.0's had the same ISC?

Hope that helps.

The 4L ISC are all the same, V8 is different, but there are different sections of the catalogue and just wanted to make sure I was on the right one.

EF9F715A is part number, will check later and get back to you.

GTLEGEND · 18-07-2024, 09:08 AM

Quote:

Originally Posted by GTLEGEND

The 4L ISC are all the same, V8 is different, but there are different sections of the catalogue and just wanted to make sure I was on the right one.

EF9F715A is part number, will check later and get back to you.

No luck on the EF9F715A, keep an eye out on the usual places.

Baminator · 18-07-2024, 07:44 PM

Quote:

Originally Posted by GTLEGEND

No luck on the EF9F715A, keep an eye out on the usual places.

All good, thanks heaps GT.

**mad2** · 19-07-2024, 06:45 PM

Hi Legend

question today is - the 'egg crates' that support the front bumper, when did they change from the plain?.

examples below

the black lower pair are what i know/believe were standard on BA/BF, but i have NO idea what the white/black upper pair are off?. any chance you could explain what's the go is?.

Thanks

Ps.i believe the upper pair do not fit the later BF2 bumper.

GTLEGEND · 19-07-2024, 09:21 PM

Quote:

Originally Posted by mad2

Hi Legend

question today is - the 'egg crates' that support the front bumper, when did they change from the plain?.

examples below

image

the black lower pair are what i know/believe were standard on BA/BF, but i have NO idea what the white/black upper pair are off?. any chance you could explain what's the go is?.

Thanks

Ps.i believe the upper pair do not fit the later BF2 bumper.

Hey mate,

Here are the relavent part numbers:

For BA BF XT, Futura, Fairmont, XR, Ghia, XL, XLT, RTV & All FPV

BAF217D926A: RHS 7/2002-9/2005
BAF17D926A: RHS 10/2005- 9/2006

BAF217D927A: LHS 7/2002-9/2005
BAF17D927A: LHS 10/2005-9/2006

BAF217D926A: RHS 10/2006 on
BAF217D927A: LHS 10/2006 on

LWB Fairlane/LTD take the below for all:

BAF217D926A: RHS
BAF217D927A: LHS

Hope that answers your question.

**mad2** · 20-07-2024, 07:52 AM

Quote:

Originally Posted by GTLEGEND

Hey mate,

Here are the relavent part numbers:

For BA BF XT, Futura, Fairmont, XR, Ghia, XL, XLT, RTV & All FPV

BAF217D926A: RHS 7/2002-9/2005
BAF17D926A: RHS 10/2005- 9/2006

BAF217D927A: LHS 7/2002-9/2005
BAF17D927A: LHS 10/2005-9/2006

BAF217D926A: RHS 10/2006 on
BAF217D927A: LHS 10/2006 on

LWB Fairlane/LTD take the below for all:

BAF217D926A: RHS
BAF217D927A: LHS

Hope that answers your question.

Thanks Legend, with that 09/2006 timeline is that roughly when they changed the front springs from the earlier BA shape?.

best see IF i canna find some part numbers on em 'crates' ......

cheers

bondy99 · 20-07-2024, 09:54 AM

The white I have is on the AU2, both front and rear.

**mad2** · 20-07-2024, 10:08 AM

Quote:

Originally Posted by bondy99

The white I have is on the AU2, both front and rear.

the white shown is not the same as the one you have on the AU and is only fitted to the front.

bondy99 · 20-07-2024, 10:30 AM

Might not be identical but I do have those fitted at the back, that's what was seen when we took the rear bumper off and towbar, CS123 had seen them also.

GTLEGEND · 20-07-2024, 04:51 PM

Quote:

Originally Posted by mad2

Thanks Legend, with that 09/2006 timeline is that roughly when they changed the front springs from the earlier BA shape?.

best see IF i canna find some part numbers on em 'crates' ......

cheers

Front spring change in BA seemed to happen around 7 or 8/2007 pending on model.

Citroënbender · 21-07-2024, 09:32 AM

“Long shot” again.

The bulb holders for B-series cornering lights. Were they serviced individually as spare parts, or was a compatible bulb holder used elsewhere on same era Fords?

GTLEGEND · 21-07-2024, 01:11 PM

Quote:

Originally Posted by Citroënbender

“Long shot” again.

The bulb holders for B-series cornering lights. Were they serviced individually as spare parts, or was a compatible bulb holder used elsewhere on same era Fords?

image

For early B Series Ghia cornering lamps from 7/02 to 9/03, yes bulb holders were sold seperate, part number BA13411B. Vehicles built after this the bulb holder was part of the lamp..

Citroënbender · 21-07-2024, 01:41 PM

Thank you. Looks like I have a hunt ahead of me, unless you know of a couple.

GTLEGEND · 22-07-2024, 08:06 AM

Quote:

Originally Posted by Citroënbender

Thank you. Looks like I have a hunt ahead of me, unless you know of a couple.

Globe holders or whole lamps?

**mad2** · 22-07-2024, 08:52 AM

Quote:

Originally Posted by GTLEGEND

Globe holders or whole lamps?

either.

Citroënbender · 22-07-2024, 08:54 AM

Just the holders, if you can please. The lamp bodies I have are reasonable, they look nicer than the blanking pieces so I might as well make them work.

GTLEGEND · 22-07-2024, 09:33 AM

I have these holders from cornering lamps and a set of good second hand lamps with holders too..

But for the life of me I cannot work out how to load a good picture on here, parts images seem ok as they are less than the size limit, but a picture goes over and don't load like the others do?

Citroënbender · 22-07-2024, 10:47 AM

I trust your knowledge of the holders being the right part - no picture required. If you tell me “kemm” I can leave an envelope under the doormat for tomorrow.

GTLEGEND · 22-07-2024, 01:01 PM

Quote:

Originally Posted by Citroënbender

I trust your knowledge of the holders being the right part - no picture required. If you tell me “kemm” I can leave an envelope under the doormat for tomorrow.

Would rather send you a pic as the holder has wiring connectors adjoining it. Send me a PM with an email and ill send a pic..

**mad2** · 22-07-2024, 01:04 PM

is there enough holders to go around?.

GTLEGEND · 22-07-2024, 01:08 PM

Quote:

Originally Posted by mad2

is there enough holders to go around?.

I only have 2 holders, but they have wiring plug attached and then a set of lamps including holders as per image that Citroen posted below.

They extra holders with wiring were in the same box and the lamps but my memory is vague as to what they are off. Best to view somoehow. If someone can advise how to post images, I would try.