AU Parts Data - Page 7

JeffAU1 · 02-09-2006, 10:08 AM

Also after the following items, part numbers and costings if you have them please

Chrome Door Handles - Inside (To fit AU Series 1) (Each or pair or set of 4)
Chrome Button for Auto T-Bar (To fit AU Series 1)
Chrome Button for Handbrake (To fit AU Series 1)

Thanks again

**russellw** · 02-09-2006, 11:07 AM

Quote:

Originally Posted by JeffAU1

Hey Russ

Whats the part number for the AU Series 1 Mudflaps

Does the part come with all screws etc needed, or are they seperate, and if seperate what item numbers

Jeff

ER 16360 A KIT - MUDFLAP - REAR, LESS BODY STYLING KIT $32.40
AU2 16360 A KIT - MUDFLAP - REAR, LESS BODY STYLING KIT, 4 DR SED $33.80
AU2 16360 KT KIT - MUDFLAP - REAR, WITH SIDE SKIRTS, LESS XR BODY KIT, 4 DR SED, (-)XR $31.30
ER 16268 A KIT - MUDFLAP, LESS BODY STYLING KIT, FRONT $31.10
AU3 16268 KTA KIT - MUDFLAP, WITH SIDE SKIRTS, LESS XR BODY KIT, FRONT, 4 DR SED, (-)XR $33.80

These are kits and come complete with all mounting hardware.

Cheers
Russ

**russellw** · 02-09-2006, 11:11 AM

Quote:

Originally Posted by JeffAU1

Also after the following items, part numbers and costings if you have them please

Chrome Door Handles - Inside (To fit AU Series 1) (Each or pair or set of 4)
Chrome Button for Auto T-Bar (To fit AU Series 1)
Chrome Button for Handbrake (To fit AU Series 1)

Thanks again

The article HERE in our tech section has all the AU trim bits listed.

Cheers
Russ

JeffAU1 · 02-09-2006, 12:04 PM

Quote:

Originally Posted by russellw

ER 16360 A KIT - MUDFLAP - REAR, LESS BODY STYLING KIT $32.40
AU2 16360 A KIT - MUDFLAP - REAR, LESS BODY STYLING KIT, 4 DR SED $33.80
AU2 16360 KT KIT - MUDFLAP - REAR, WITH SIDE SKIRTS, LESS XR BODY KIT, 4 DR SED, (-)XR $31.30
ER 16268 A KIT - MUDFLAP, LESS BODY STYLING KIT, FRONT $31.10
AU3 16268 KTA KIT - MUDFLAP, WITH SIDE SKIRTS, LESS XR BODY KIT, FRONT, 4 DR SED, (-)XR $33.80

These are kits and come complete with all mounting hardware.

Cheers
Russ

Do you know which one I would use for a AU1 Future Sedan, No body Kit ?

JeffAU1 · 02-09-2006, 12:04 PM

Quote:

Originally Posted by russellw

The article HERE in our tech section has all the AU trim bits listed.

Cheers
Russ

WOW thanks

**russellw** · 02-09-2006, 08:25 PM

Quote:

Originally Posted by JeffAU1

Do you know which one I would use for a AU1 Future Sedan, No body Kit ?

The very first one in each set - the ones that start ER.

Cheers
Russ

JeffAU1 · 02-09-2006, 11:26 PM

Quote:

Originally Posted by russellw

The article HERE in our tech section has all the AU trim bits listed.

Cheers
Russ

Sorry Russ, but im not that clever with cars.

In the below pic is both the t-bar shifter and the handbrake lever, both with the silver button, (Yes i have circled these to make sure i am explaining myself correctly) and i need them in the same colour as the interior of my car

The link you gave me shows the handbrake as:
AU Leather Handbrake:
ER 2760 B6 about $200 plus the boot.

But i dont know if this is the right one, and in the right colour... also i could nto find the correct t-bar with chrome button

thanks again

Crash Lander · 03-09-2006, 07:50 AM

I had DL LTD once and had to replace the leather T-bar auto handle. Cost me $300!! They nfitted slightly the wrong colour, so I made them change it.

JeffAU1 · 03-09-2006, 08:31 AM

Quote:

Originally Posted by Crash Lander

I had DL LTD once and had to replace the leather T-bar auto handle. Cost me $300!! They nfitted slightly the wrong colour, so I made them change it.

But the interior is the one thing i dislike about my car, so i think its $300 well spent

JeffAU1 · 05-09-2006, 11:02 PM

Russell,

Whats the part number/cost for a AU Left Electric Door Mirror with Glass/Cap ?

**russellw** · 06-09-2006, 11:44 PM

Quote:

Originally Posted by JeffAU1

Russell,

Whats the part number/cost for a AU Left Electric Door Mirror with Glass/Cap ?

BA 17683 DP MIRROR HEAD - EXTERIOR REAR VIEW, LH, PAINT TO SUIT, $150.00

If you want the individual bits then use the Parts Database Search Tool and search under mirror.

Cheers
Russ

xr6vct1999 · 12-09-2006, 05:59 PM

Hi russellw !
I have AU 1999 xr6 vct 5sp
I was told today i need new clutch and asked how much was told $1400 fitted. My reaction was am geting new car for that price. My question the f3zz7563a is that the right one i assume it is ford part number and price? Is there an aftermarket kit that could be used ?

cheers

**russellw** · 12-09-2006, 06:26 PM

I would have thought the relevant bits were these ones:

EDTVE 7563 A PLATE CLUTCH PRESS, (4.0L SOHC EFI 6 CYL (VCT) 5 SPEED MANUAL (T5) OR 4.0L SOHC EFI 6 CYL (HP) 5 SPEED MANUAL (T5)) 537.00

Not sure which actual clutch plate.

The F3ZZ unit is also a pressure plate plate but I suspect it's a V8 one.

xr6vct1999 · 12-09-2006, 06:45 PM

Thanks for your reply. Look i realy have no idea as F3ZZ was the most expensive i thought it could be it. And to confirm these are ford part numbers and prices is it gst inclusive?

Thanks for your help.

**russellw** · 12-09-2006, 06:56 PM

These are Ford part numbers - prices were correct last December when we created the DB but they won'tr be now inevitably.

Cheers
Russ

**Mechan1k** · 13-09-2006, 01:20 AM

Quote:

Originally Posted by JeffAU1

Sorry Russ, but im not that clever with cars.

In the below pic is both the t-bar shifter and the handbrake lever, both with the silver button, (Yes i have circled these to make sure i am explaining myself correctly) and i need them in the same colour as the interior of my car

The link you gave me shows the handbrake as:
AU Leather Handbrake:
ER 2760 B6 about $200 plus the boot.

But i dont know if this is the right one, and in the right colour... also i could nto find the correct t-bar with chrome button

thanks again

It should be that grey colour ... I have the handbrake and boot with chrome button sitting at home ready to swap in ... only problem is .... I need to pull the driver's seat out to swap it over (it's the only way to do it too).

handbrake and boot was over $200 from memory ... as the handbrake is the entire ratchet mechanism as well with cable to mount under the floor of the car.

xr6vct1999 · 13-09-2006, 01:44 PM

russellw thanks it is much appreciated. Yes the prices must heve gone up as the $ 1400 was ford service workshop price. I asked the guy how much if i supply the clutch he sad just labor and machining of the fly wheel $ 580 so that leaves $ 820 for clutch.

Thanks

Funtime25 · 21-11-2006, 11:33 PM

I am after the rear boot badge that is located in the centre of the rear boot lid for a LTD AUII

**russellw** · 21-11-2006, 11:59 PM

Quote:

Originally Posted by Funtime25

I am after the rear boot badge that is located in the centre of the rear boot lid for a LTD AUII

It appears to be obsolete.
The BA one is BL F42528 A NAME PLATE, LTD, LTD

Cheers
Russ

Duffman · 25-12-2006, 12:28 PM

hay russel you wouldn't happen to know how much a headlight switch would be? Just the standard black one in the forte... mine is broken :( thanks

**russellw** · 27-12-2006, 12:46 PM

All of about $11 or so.

AU 11666 A

Cheers
Russ

Duffman · 24-01-2007, 10:23 PM

Thanks Russell. For anyone interested the head light switch (all of it) that plugs into the loom costs $48 from ford.

phibza_XR6 · 14-03-2007, 09:11 PM

hey, just wondering does anyone happen to no if the fuel tank sender unit in
the sedan is the same in the utes.

Chippar · 15-03-2007, 09:49 AM

Mate, I've checked everywhere and everywhich way but I can't find any info on an AU Falcon Drive Belt/Serpentine Belt e.g. part No. or price. What am I doing wrong or isn't it listed?

Chippy..

**russellw** · 16-03-2007, 10:31 PM

Quote:

Originally Posted by chippitydip

Mate, I've checked everywhere and everywhich way but I can't find any info on an AU Falcon Drive Belt/Serpentine Belt e.g. part No. or price. What am I doing wrong or isn't it listed?

Chippy..

AJK6 956 BELT, 4.0L SOHC EFI 6 CYL (VCT) $65.80 AJK6 995 BELT, (4.0L SOHC EFI 6 CYL (MP) OR 4.0L SOHC EFI 6 CYL LPG OR 4.0L SOHC EFI 6 CYL (HP)) $46.00

Cheers
Russ

Chippar · 17-03-2007, 10:07 AM

Quote:

Originally Posted by russellw

AJK6 956 BELT, 4.0L SOHC EFI 6 CYL (VCT) $65.80 AJK6 995 BELT, (4.0L SOHC EFI 6 CYL (MP) OR 4.0L SOHC EFI 6 CYL LPG OR 4.0L SOHC EFI 6 CYL (HP)) $46.00

Cheers
Russ

Thanks for that Russ.

Chippy..

Grechie · 05-04-2007, 01:20 PM

Hey guys...

using the parts database, it failed for me, i was just wondering if you's could tell me what this AU Falcon part number is from :

WR2T-12A650-HB

Cheers

- Grechie

**russellw** · 09-04-2007, 06:30 PM

Quote:

Originally Posted by Grechie

Hey guys...

using the parts database, it failed for me, i was just wondering if you's could tell me what this AU Falcon part number is from :

WR2T-12A650-HB

Cheers

- Grechie

The number should be RWR2T 12A650 = all of which series are ECU modules but I don't have an HB listed.

Cheers
Russ

namecrap · 07-06-2007, 06:40 PM

hi can u tell me what series au this ecu is from wr2a-12a650-cd

cheers

**russellw** · 07-06-2007, 09:51 PM

The prefix is incorrect but the 12A650 CD is from a 5 litre 200 kW T-Series with 4 speed auto so therefore it is a T1, TE50.

Cheers
Russ