|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
Thread Tools | Display Modes |
11-01-2006, 11:44 PM | #1 | ||
Regular Member
Join Date: Dec 2005
Posts: 205
|
gday fellas
jjm here (cbf changing accounts) installing a head unit in an ef and need to know which cables in the car loom is the black, yellow and red cables, i know that the wires are yellow = green yellow red = blue white black = black , brown (correct me if im wrong) also apon cuttin the yellow (green yellow) wire, i heard that "click click" noise and the smart lock light went off, but still locked ok, inside outside and remote, if i cut it will the smart lock go, or will be ok? cheers fellas |
||
12-01-2006, 12:05 AM | #2 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 342
|
ok by the Gregorys Book
(Black)Black is your ground or - on the batt (Blue and White)yellow should be the +12v from the Batt and (Black and Pink)red should be ignition switch im not to sure bout the colour but thats what was in the book. best bet to do is check the power with a light tester or multimeter and click click noise could of been a relay clicking or you mite of popped a fuse
__________________
FG XR8, 6spd auto, dual zone, sat nav, camera, leather, k N filter, Quad exhaust. |
||
12-01-2006, 12:08 AM | #3 | ||
Regular Member
Join Date: Dec 2005
Posts: 205
|
I know how to wire, all i need to know is weather to cut the green yellow wire that the smartlock wont switch off.
|
||
12-01-2006, 12:12 AM | #4 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 342
|
oh ok, i think the smartlock hasnt got anything to do with the radio.
__________________
FG XR8, 6spd auto, dual zone, sat nav, camera, leather, k N filter, Quad exhaust. |
||
12-01-2006, 12:13 AM | #5 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 342
|
if you cut the cable and the smartlock light went off, all i mite be is a fuse.
Just check all the fuses see if any are popped
__________________
FG XR8, 6spd auto, dual zone, sat nav, camera, leather, k N filter, Quad exhaust. |
||
12-01-2006, 01:35 AM | #6 | ||
Regular Member
Join Date: Dec 2005
Posts: 205
|
ANOTHER NEW PROBLEM ;)
figured out the wires, works, accept, everytime put on lights (parkers) blows a fuses) how can this be? whats the problem? cheers |
||
12-01-2006, 08:12 AM | #7 | ||
Regular Member
Join Date: Jan 2005
Location: Geelong
Posts: 342
|
There should be a brown wire there this wire is used to turn the lights on the stock headunit when you turn on the headlights, just make sure its not touching anything prob best to cut the end of it so there no copper showing and tape it up.
__________________
FG XR8, 6spd auto, dual zone, sat nav, camera, leather, k N filter, Quad exhaust. |
||