|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-09-2005, 08:53 AM
|
#1 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
Rercently a mate has given me a set of au sr side skirts, ive had them painted up but im not sure how to fit them... they dont look like they would be too hard but im not sure where to start... can anyone help please?
also am fitting an xr series 2/3 front to my series 1 forte will have pics soon. |
||
|
|
|
01-09-2005, 09:00 AM
|
#2 | ||
|
Nat D
Join Date: Jul 2005
Posts: 1,131
|
hey mate about the front xr skirt? how hard is that to do?? how much has it cost you in total and who did u get parts from?
cheers, Nat |
||
|
|
|
|
01-09-2005, 01:27 PM
|
#3 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
To fit skirts
1. Remove the plastic clips holding the inner wheel guard on (only need to remove 3 from the front and 2 or 3 from the back). 2. If you have the rubber strip along the door sills, remove it (pull up, it should just "snap" out) 3. Slide skirt on to sill (easier to do with the doors open) 4. Locate front and rear of skirt against the body - the inner wheel cover then goes over the skirt ends. 5. Secure skirt in wheel well using plastic clips, or self tapping scres (12mm x 8 or 10G ones should do). 6. Replace plastic clips removed at step 1 7. Replace rubber strip removed at step 2 (I ended up using screws to secure mine as the original clips wouldn't fir properly). 8. Drink beer. All done
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
01-09-2005, 02:22 PM
|
#4 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
Nat... its not cheap but i think its worth it... $400 for the front xr bar 2nd hand... $200 to have it painted. $400 for the headlights... havent got the indicators yet but ford sell them for about $70 each. I havent fitted it yet so im not sure how hard it will be but it shouldnt be too bad. will let you know when its done... am picking up the bar from the spray shop tonight will hopefully get a chance to fit it this weekend. Parts can be hard to find, just call around wreckers and ask... try and find a 2nd hand bar in good nick same colour as your car - will save you $$$ for painting it. I got the lights from the headlight hospital... there is a member of this site "thedok" who runs it ask him about lights... and i got the bar from ace taxi's - 165 nepean hwy mentone, dont know the number, look it up in the white pages if u cant find it let me know and ill get u the number. by the way you need to have a series 1 bonnet, xr front will not fit series 2or3 bonnet. good luck!
|
||
|
|
|
|
01-09-2005, 02:24 PM
|
#5 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
Cheers for the skirts info jc!
|
||
|
|
|
AU side skirts
Linear Mode
