|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-07-2007, 06:31 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2006
Posts: 11
|
Hi all
Still having trouble with the thermo fan not comming on in the ol" KF laser I have changed the fuse and the relay but still no go. The fan works ok if you connect it to the battery but won't come on when the car is running or idling . If i disconnect the thermo switch on the thermostat and ground the wire onto the engine block the relay clicks but fan still doesn't work . Anyone have any ideas as how to fix it before i take to it with a baseball bat cheers. Dayvo |
||
|
|
|
09-07-2007, 07:40 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
well relpace the wires between the sensor and fan including the push on connectors solder if possible
wires must be broken or corroded if still no good add a internal switch and rewire direct to the battery so you can watch the temp guage problem solved  :
__________________
My car goes Brumm Brumm |
||
|
|
|
thermo fan AAAAGGGGGGGHHHHHHHHH
Linear Mode
