|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
Thread Tools | Display Modes |
15-03-2007, 02:05 AM | #1 | ||
bumps in the trunk
Join Date: Apr 2006
Location: Perth
Posts: 93
|
Hi everyone,
another problem has arose, i fitted a sports cluster(ed i think)from the wreckers to replace my standard one, a part from the oil pressure gauge (need the sender thingy for it) not working, my fuel gauge isn't working. I fitted it on the other day and took it for a test to see if it was all good, everything worked except the odometer and oil pressure gauge, i went to get some fuel because i was low, i filled it up and came home. The past few days ive been driving around, the needle goes a little over full, and comes back about 2 mm's and stays there, i know ive driven enough to get it to about half a tank. So basicaly, it worked when i fitted it and stopped when i filled her up any ideas? thx
__________________
1994 NC Fairlane Ghia V8 1995 Ef Gli |
||
15-03-2007, 05:59 PM | #2 | ||
Aspiring mr efxr
Join Date: Jan 2006
Location: Albury - Wodonga
Posts: 1,185
|
in tank fuel sender may have sh!t its self as mine has. can happen out of the blue with no warning apparently. can only buy it genuine from ford. accessable from where u get to your fuel pump as it is mounted on the same unit. be aware this is only and idea and ur problem may be different.
__________________
EF Wagon Project: Standard = 99.6rwkw <!> 2.5" SuperCat cat back exhaust, Wade 1636 cam, K&N boxed pod (new dyno required Sony headunit, splits, 6.5"s and 2 x 12" with response precision amp = 135.5 dB Daily = Ae82 '85 corolla Fwd :togo: , 5 speed, 12" sub, 6x9's, green LED's the course i am studying: http://www.wodonga.tafe.edu.au/01_courses/course.jsp?id=AUR30905NANA |
||