|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-03-2013, 07:04 PM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2007
Posts: 3
|
Any ideas guys
One of my coil packs spark is only coming out of 3/4 of outputs Is this unusual? Are the Super Cheap generic brand coil packs any good? If not what is the best brand to buy. Should I replace both? Cheers |
||
|
|
|
19-03-2013, 07:18 PM
|
#2 | |||
|
AU DIE HARD
  
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
 
|
How did you determine only 3 out of 4 were sparking ? If they are the originals it would be time to replace MSD or VDO are pretty good options check E bay they list a few at reasonable prices and yes Both would be a good idea
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .........................  .........................Quote:
|
|||
|
|
|
|
19-03-2013, 07:49 PM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2007
Posts: 3
|
Spark only came out of 3 of them whilst holding the lead out of them, then tried to earth the fourth one but still no spark
|
||
|
|
|
|
20-03-2013, 11:24 AM
|
#4 | ||||
|
Back to Le Frenchy
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
|
Quote:
Replace with MSD is the usual option, part# MSD8241.
__________________
Quote:
07 Renault Sport Megane F1 Team R26 #1397
|
||||
|
|
|
|
25-03-2013, 09:17 PM
|
#5 | ||
|
Q - CAR
Join Date: May 2011
Location: Central Coast ..
Posts: 746
|
__________________
AU FORD STROKER 347 Windsor Stroked; (10:2.1) / TFS 190 heads / TFS R Series 90 manifold / Accufab 85mm Race TB / 90mm Lightening MAF / K&N 90mm pod CAI / FTI custom cam (230-236 @ 50) / Bosch 36lb inject / MSD coil + leads / ASR 8lt sump / Mcleod RST Twin Plate Clutch / Pacemakers PH4006 + 3" single exhaust / BA Premium brake pac / Pedders Xtreme coil over shocks / 30mm Whiteline sway / 3.45 LSD / Custom FG bonnet / Ghia interior upgrade / Enkie Rims - staggered / Quarter Horse tuned. |
||
|
|
|
|
27-03-2013, 11:31 PM
|
#6 | ||
|
T-Series Club Member Vic
Join Date: Aug 2011
Location: Melbourne (South-East)
Posts: 2,755
|
I'd first try swapping out that lead as it sounds like you were still trying to use the same lead to see the spark between the coil and the lead. If the lead is shot the coil isn't going to be able to push a spark through air to a lead that is too shagged to help it get that spark to earth...
Yell out if you need help, I'm in Melbourne's south-east and have 2 spare leads (the long ones!) and coils. |
||
|
|
|
Au v8 coil pack
Re: Au v8 coil pack
Linear Mode
