|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
14-02-2018, 09:47 PM | #1 | ||
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Appologies up front for opening up a new thread just to post a question which might have been asked before.
I couldn't find anything satisfying I noticed today a whirring noise when my aircon compressor is engaged. It almost sounds like a faulty harmonic balancer or in a way like a supercharger on idle. The whirring noise changes with changing rpm's. Aircon seems fine....a bit week first on a very hot day parked in the sun all day but cools down after a while sitting on fan speed 4 and recirculation setting. I haven't done a re-charge in a while and its the first compressor. Ford Falcon Futura, year 2000 nearly 200000 original km's Any ideas?....the noise disappears when ac-compressor is not engaged and returns immediately when clutch engages. Would be happy about any answer and help.... |
||
15-02-2018, 01:15 AM | #2 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,331
|
The AU is fitted with an FS-10 compressor and there are rebuild kits for them that include the compressor bearing. It could also be the A/C compressor clutch that's on the way out although they tend to squeal.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
15-02-2018, 06:11 AM | #3 | ||
Regular Member
Join Date: Jan 2008
Location: Australia
Posts: 187
|
Hey Russel...
Its not really a squeal like a loose serpentine belt.....its a whirring sound when the compressor is engaged. It was very hot yesterday so i dont know if i can put it down to that. I checked the inlet and outlet lines and one was cold with condensed water on it and the other was warm and that seemed normal. I am too busy to do it myself. Ford would charge an arm and a leg and i'm not sure what other organisation is specialised in ac systems on cars in the Wollongong/ Shellharbour area. I hope its not the compressor and a regas will do. |
||
15-02-2018, 08:48 AM | #4 | ||
Regular Member
Join Date: Jan 2005
Location: vic
Posts: 436
|
Yes, check that it's not the clutch is not slipping. Replaced mine recently as it had an oil leak, and chewed the clutch out.
|
||
18-03-2018, 12:56 AM | #5 | ||
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 588
|
I have a similar problem with my 2002 AUIII Fairmont. The excessively noisy whirring only when the clutch is engaged, and also when the engine has been off for a while sometimes there's a bit of a squeal maybe 30 seconds after I take off. Can't see any obvious belt slipping but I notice the battery voltage is on the low side then suddenly shoots up to normal after the squeal.
Sounds like I have a buggered compressor AND clutch? How much do they cost to replace at a specialist? |
||
19-03-2018, 08:56 PM | #6 | ||
Regular Member
Join Date: Jan 2005
Location: vic
Posts: 436
|
Cost me $800 to have a new Sanden compressor fitted.
|
||
19-03-2018, 11:18 PM | #7 | ||
Regular Member
Join Date: Nov 2016
Posts: 205
|
I turn mine on but it never gets cold...think it needs to be regassed
__________________
[B]WTB (Syd)...AU 5.0 or xr8 4 speed auto transmission in good working cond /B] |
||
20-03-2018, 08:45 PM | #8 | ||
Regular Member
Join Date: Feb 2013
Posts: 43
|
my au compressor clutch seized .. heaps of smoke but stopped once a/c turned off . I bought a sanden compressor, receiver drier, and valve as a package off ebay for about $360 went to a/c place to get gas sucked out , put on new stuff ... my condenser was ok but I should have replaced then I would have had a completely new system $200 for condenser .$150 for regas its really good now.
if you are reading this and you have a weird smell in your car and carn't figure it out , it used to drive me crazy and I used to think it was oil on muffler or oil burning on engine , bad fuel etc. Once I replaced the compressor ..no more smell . it was the compressor clutch on the way out |
||
20-03-2018, 08:55 PM | #9 | ||
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Melbourne
Posts: 6,931
|
My 04 BA does the same. Took it to an auto A/C shop and they said it's pretty standard. Replacing will cost in the region of $800 to $1200. Bit of labour involved apparently as there are a few other linked parts that you need to take care of at the same time.
Recommended that i just ignore it until it completely dies. The A/C is still really cold all of the time so thats not a problem. Just the noise is really annoying, especially when going through underground car parks |
||
01-06-2018, 01:04 PM | #10 | ||
FF.Com.Au Hardcore
Join Date: Jun 2005
Posts: 588
|
Mine is now super noisy and it's also not cycling properly. If I switch AC on when cruising I can feel the car lurching as it kicks in and out, and the compressor only stays on for about a second each time (excessive friction causing overheat cutout?). Engine bay fan also starts up pretty quickly which didn't used to happen. Not sure it's worth spending $800+ on a repair, but ask me again once summer comes.
|
||