|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
29-06-2017, 10:21 PM | #1 | ||
Starter Motor
Join Date: Jun 2017
Posts: 2
|
Hello Everyone,
Any instructions on how to remove the boot off a 2000 Cougar? Thanks, K. |
||
30-06-2017, 05:52 AM | #2 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,248
|
It's not overly simple.
Open the hatch. Remove the package tray. Remove the driver's side holder for the package tray. Remove the driver side C-Pillar trim. Remove the driver side rear quarter panel trim - there are instruction on how to do this in our Technical Portal. Remove the three plugs that hold up the rear of the headlining. Use a small screwdriver to pop out the wiring harness plug from the roof. Trace the wiring down to the inside of the quarter panel and unplug it, then feed it back out. The wiring will come out with the hatch when you remove it. Have someone hold up the hatch and remove the support struts from the hatch by removing the clip with a small screwdriver. Pull the headlining down and remove the four 10mm nuts that hold the hatch liftgate on. Note: The liftgate is heavy and will require two people to remove. Cheers Russ
__________________
Observatio Facta Rotae
|
||