|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
07-08-2008, 10:56 PM | #1 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
ok so i know this is a massive safty isue so i kinda wanna fix it as soon as i can, the rear passanger seat belt will not wind its self back in.
I pulled the pannel from the wall thinking hat the belt might have got twited some where but it hadent. and well now imn stuck on what to do. it takes about 5 mins for me to manual feed it back in and made it so u cant use the seatbelt by putting it behind the chair. anyone know how i can fix this ? |
||
07-08-2008, 11:15 PM | #2 | ||
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
only fix is replacement. the internal clockspring which is responsible for the retraction of teh seatbelt has broken and there is no fix for that.
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO Can't live with it, can't live without it! |
||
09-08-2008, 09:16 PM | #3 | ||
Moderator
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
|
Pretty much what Evilchief said ... and they can be a bit of a PITA to replace ... if it is your centre one ... have fun.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
09-08-2008, 09:22 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: May 2008
Posts: 1,536
|
hang on guys.... stop always looking at worst case.
When you take it out wash it in warm soapy water. More often than not they aren't stuffed they are just dirty. The best way to clean is as I just stated. At the end of the day it's worth a go b4 just replacing and throwin away money if it isn't needed. |
||
09-08-2008, 11:04 PM | #5 | ||
Fantastic Plastic
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
|
Just to mention too ( this happened to my drivers seat belt ), pull the belt out all the way and check it is not freyed on the edges of the belt, this can cause it to jam and retract very slow/ or not at all. If the belt is freyed at all , get a cigarette lighter and burn/melt off the freyed edges of the belt.
__________________
------------------------------------------------------------ :eclipsee_ |
||
11-08-2008, 09:55 PM | #6 | ||
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
hey there isnt any freys in it as far as i can see... how do i tkae the entire emchanism off the lining of the car ?
and how much would i be looking at for a brand new one? somone said you cant get them from wreckers due to ssafty concerns or somethibng |
||
12-08-2008, 08:48 PM | #7 | ||
Starter Motor
Join Date: Aug 2007
Posts: 5
|
Seems to be a common fault for the AU, I had one replaced under warranty and paid for the other one which cost $98.94 for the belt and $70.00 labour to fit from Ford. They gave me a lone car while they had mine which was an AU and both its rear belts were stuffed.
|
||
12-08-2008, 11:47 PM | #8 | ||
Donating Member
Join Date: Dec 2006
Posts: 5,532
|
Take it out of the car and examine it by taking off plastic C pillar lining and undoing torx bolt that holds it in, also undo torx bolt that holds other end to the floor under the seat
Most of the times the plastic liner on the seatbelt spool breaks and jams it from retracting properly. When seatbelt is out of the car pull it completely out (as in totally unrolled from the spool) and look at the plastic liner part. Best way to describe it is like a spool of electric cable, imagine the drum of the cable and the seatbelt winding back onto it. You want to check the plastic drum part, under the plastic is a metal axle bit that does the rolling up. If you see this plastic part cracked just break it ALL off, you must get rid of all the plastic bits though and it should retract like normal. The plastic is there to stop the belt fraying but will not affect seatbelt operation, if it looks frayed you should replace it anyway. If the clock spring is broken it wont retract at all, yours sounds like it slowly retracts so I think you should be able to get away with the fix above. |
||
13-08-2008, 08:24 AM | #9 | ||
FF.Com.Au Hardcore
Join Date: Nov 2007
Location: Riff
Posts: 12,395
|
^^ sounds interesting, i also have this same problem. Will give it a go this weekend.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
13-08-2008, 10:27 AM | #10 | ||
Starter Motor
Join Date: Aug 2007
Posts: 5
|
Let us now how Jastel's fix go's for your rear belts.Also exercise caution when removing plastic trims, as they break easily around the clips.
|
||
27-06-2010, 05:48 PM | #11 | ||
Starter Motor
Join Date: Feb 2010
Posts: 17
|
so, if it is a front seat belt problem... HOW DO YOU GET THE PILLAR COVER BACK ON???
Thanks for any help ) |
||
29-06-2010, 10:32 PM | #12 | ||
Resident AFF detailer
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
|
22 month threadmine... :( R.I.P.
__________________
No longer an 'active' detailer. |
||
30-06-2010, 08:01 AM | #13 | |||
Audi S3
Join Date: May 2005
Location: Sydney.
Posts: 8,307
|
Quote:
line it up where the clips go, and bang it back in. and for relevance, both my rear belts are dead i need to do this
__________________
|
|||
30-06-2010, 08:52 AM | #14 | ||
Walking with God
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
|
I have one in the rear of the SR that could use a little TLC.
GK
__________________
2009 Mondeo Zetec TDCi - Moondust Silver 2015 Kia Sorento Platinum - Snow White Pearl 2001 Ducati Monster 900Sie - Red Now gone! 1999 AU1 Futura Wagon - Sparkling Burgundy On LPG Want a Full Life? John 10:10 |
||
30-06-2010, 01:39 PM | #15 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
Mine broke on me, i just replaced it, was a easier option, never had a problem since
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
19-04-2016, 10:44 PM | #16 | ||
Starter Motor
Join Date: Apr 2016
Location: Brisbane
Posts: 14
|
Hello,
Thanks for your input to this problem. I have a couple of questions please regarding repairing a non retracting rear seat belt on my AU series 2 Fairmont Ghia The plastic trim on the 'C' pillar seems fragile and it is advised to be careful to avoid breaking of the snap clips. Question:- best method to get it off? and how are they attached? Question:- can the clock spring be easily replaced if found broken. The belt retracted about 10 cm but stopped so I am hoping its just needs tensioning. I will follow your advice about removing broken plastic bits etc. Hoping you can help. |
||
04-07-2021, 09:49 PM | #17 | ||
Regular Member
Join Date: Dec 2020
Posts: 33
|
In my experience... just a point of view. Silicone spray on seatbelts is a quick caryard fix all dealers know about, temporary. The spray does not fare well over time with heat inside the cabin. It becomes sticky then a redo is needed.
With AU's, ba & bf too, I've always had long term success with WD40 on the "hidden" part of the belt in the pillar & the spring roll itself. I first thoroughly clean, vacuum & wipe down all inner pillar surfaces, plastics, & belt itself with eucalyptus spray from woolies. With the cover plastics removed & the belt extended simply spray the recoil unit & the belts, liberally with WD40. Yes it will attract dust but is good for about 5 years before a reclean. Those plastics can also get pretty sharp from belt drag so give them a light sand to round edges on the inside. You will find the recoil is much stronger & the belt will retract nicely to sit vertical in the pillar with no "hand feeding". |
||
This user likes this post: |
05-07-2021, 09:51 PM | #18 | ||
Starter Motor
Join Date: Apr 2016
Location: Brisbane
Posts: 14
|
Thankyou for your advice.
Regards, |
||