|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-01-2022, 08:43 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2016
Location: Goulburn NSW
Posts: 316
|
Hi Brains trust...
Does anyone know how to disconnect the b****y tight ball joints from the steering knuckle? I have tried all the tricks. Hammering the knuckle. A ball joint separator. Even resorted to the ball joint wrecking wedge tool. I cannot get the stupid thing to let go..... Any hints?? PS - I have undone the nut 🤣
__________________
2012 MC Mondeo LX TDCi Wagon - Highway Hack 392K km and counting - Now gone 😢 2008 Peugeot 308 HDi - Highway Hack II 2008 Citroen C4 HDi - Highway Hack III 2010 Peugeot 308 HDi SW - Shaggin Wagon II 2016 VDJ200R Landcruiser GX Wagon - TTD V8 Power  !2017 Toyota RAV4 GX Wagon - Shopping trolley - Gone 2022 Volvo XC40 T4 Inscription - Shopping trolley II 2002 BMW R1150GS |
||
|
|
|
29-01-2022, 08:47 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,279
|
There's a couple of YouTube clips showing a hydraulic jack being used so maybe that's a last resort!
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
29-01-2022, 09:26 AM
|
#3 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
bigger hammer, I used a 4lb hammer to really thump it (wedge tool), and then hit the knuckle and it popped out. I should mention I'm not scared to wield a hammer but I know how to handle one too.
the other trick is to use heat on the knuckle side of the tapered hole and hit it. The heat on the knuckle will open the taper, hopefully helping in releasing the tierod end when hitting it some more blows. lol you can see why i removed my lower control arm when doing my suspension all those years back. It's tight as all buggery.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
|
29-01-2022, 03:06 PM
|
#4 | ||
|
Regular Member
Join Date: Feb 2016
Location: Goulburn NSW
Posts: 316
|
So I ended up removing the wishbone and knuckle, drilling out the rivets, then using the ball joint separator and a rattle gun, loaded the ball joint right up, then smacked the knuckle again with a hammer.
Ball joint exploded out of the knuckle, never to be seen again ������ Next problem. Pressing out the bearing. My 6 tonne press isn't up to the job. Any suggestions what size press I need?
__________________
2012 MC Mondeo LX TDCi Wagon - Highway Hack 392K km and counting - Now gone 😢 2008 Peugeot 308 HDi - Highway Hack II 2008 Citroen C4 HDi - Highway Hack III 2010 Peugeot 308 HDi SW - Shaggin Wagon II 2016 VDJ200R Landcruiser GX Wagon - TTD V8 Power !2017 Toyota RAV4 GX Wagon - Shopping trolley - Gone 2022 Volvo XC40 T4 Inscription - Shopping trolley II 2002 BMW R1150GS |
||
|
|
|
|
29-01-2022, 04:48 PM
|
#5 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
10t would do the job but might be best left to a workshop, so get the other side ready to go too, then pay once for the press.
Paying for a workshop to press some things is one job I'm happy to pay, especially if I'm not doing jobs that require a press often. Even if it sucks having to get into town to get it done.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
|
30-01-2022, 02:19 AM
|
#6 | ||
|
FG XR6 Ute & Sedan
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,450
|
You usually replace the whole lower wishbone arm as an assembly see https://www.ebay.com.au/itm/33430174...AAAOSwR7hh7OZP and https://www.ebay.com.au/itm/33430550...frcectupt=true and https://www.youtube.com/watch?v=OyO6qp0Uyes
__________________
regards Blue |
||
|
|
|
|
06-02-2022, 09:27 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Ivory Tower
Posts: 5,414
|
I've just bought a 2017 MD Titanium auto diesel hatch with just over 55k's on the odo. I'm going to have my local mechanic do a full inspection on it but just wondering, are the ball joints and wheel bearings a problem on these vehicles?
TIA.
__________________
2021 BMW M550i in Black Sapphire Metallic.
11.52 @ 120mph stock |
||
|
|
|
08-02-2022, 12:43 AM
|
#8 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
No they should last their typical service life given it's been treated normally.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
| This user likes this post: |
|
13-02-2022, 06:40 AM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
|
Bundybear, did you get this sorted?
Sent from my SM-G980F using Tapatalk
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||
|
|
|
|
13-02-2022, 11:11 AM
|
#10 | |||
|
Regular Member
Join Date: Feb 2016
Location: Goulburn NSW
Posts: 316
|
Quote:
__________________
2012 MC Mondeo LX TDCi Wagon - Highway Hack 392K km and counting - Now gone 😢 2008 Peugeot 308 HDi - Highway Hack II 2008 Citroen C4 HDi - Highway Hack III 2010 Peugeot 308 HDi SW - Shaggin Wagon II 2016 VDJ200R Landcruiser GX Wagon - TTD V8 Power !2017 Toyota RAV4 GX Wagon - Shopping trolley - Gone 2022 Volvo XC40 T4 Inscription - Shopping trolley II 2002 BMW R1150GS |
|||
|
|
|
Removing ball joint
Linear Mode
