|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-08-2008, 04:15 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2008
Posts: 2
|
Hi all,
I have a KQ xri 2.0 auto 2002 model laser. I think it has an FS02 engine. Trouble is, I can't read the oil level. I have tried both cold and hot but the oil is very thin (by a Ford dealer) and all I get is oil all the way up the stick to the spring with no discernible level visible. On all my other cars it has been really easy to tell. I have even left the dipstick out overnight and tried it first thing, when hot, 15 minutes after stopping and turning it 180 degrees. Gas station attendants can't read it either. Could I have the wrong dipstick, is there a fault with these or could oil somehow be getting caught in the dipstick tube? It is really annoying me as it is a great car and I wouldn't want anything to happen to the engine because the oil level wasn't topped up or topped up too much. It is serviced every 10000kms and due for one soon so I will ask then. Can anyone help me? Thanks  : |
||
|
|
|
30-08-2008, 08:31 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Highfields...QLD
Posts: 3,746
|
You should read the oil level with the engine cold not hot. If it still seems to leave no level then I'd lightly sandpaper one side of the stick to roughen up the surface so the oil stays on the dipstick. If its highly polished the oil will quickly run off.
|
||
|
|
|
Trouble reading oil level
Linear Mode
