|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-08-2021, 03:01 PM
|
#1 | ||
|
Regular Member
Join Date: Dec 2020
Posts: 33
|
So this is the 2nd time I have done this, a rookie mistake, & now my airbag light, code 18, is on again.
In my rush to put my new seats in, I disconnected the yellow electrical connectors under the seats, undid the torx bolts, popped the new seats in, & reconnected the yellow plugs for the pretensioners.... whoops,..... I didn't disconnect the battery first, & it threw a soft code 18 into the ute. So my hint is, assuming your wiring, plugs, & pretensioners are in good condition... In this order!...Disconnect the battery first, then your yellow connector plugs, do your work on the car, reconnect yellow plugs, then reconnect battery, all in That order. Otherwise the local garage has to clear that code to get your airbag light off. My little eBay $50 scanner cannot clear abs and airbag codes... bugger. Lesson learned.... again. Hope this helps someone. |
||
|
|
AU 2 3 airbag light on- handy tip
Linear Mode
