Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 21-08-2006, 03:23 PM   #1
Mittsze
Starter Motor
 
Join Date: Aug 2006
Posts: 1
Default Spark Plugs & Firing Order Help

Hi ya i took the plugs out and clean them but i pulled the leads right out i dont know where they go back to FORD LASER K.C 1985 G.L
IS IT 1432 STARTING ON THE MARK ON THE DIZZIE THAT STROKE MARK AND GOING TOWARDS THE DRIVER WAY- IE FACING THE F/ WINDOW CLOCKWAYS SAY 1 AFTER THE STROKE 4 3 2 ALSO NOW I TAKE IT THAT ON THE LEFT SIDE OF THE MOTOR IS CL 4 THEN TO THE RIGHT 3 2 1 HELP GOT ANY PICTURES ITS MY 18 YEAR OLD SONS CAR AND DOES NOT KNOW ANY THING JUST HOW TO TURN THE KEY. HELP IAM DEAD AND I HAVE FLATEN THE BATREY TRYING TO GET THE PLUGS RIGHT WHERE IS CL 1 ON THE DIZZIE AFTER THAT STROKE MARK GOING CLOCKWISE YO MUMS HOME .....FFFFFFFF MITTSZE. HELP :

Mittsze is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2006, 07:58 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

first cylinder on compression stroke timing pully should be on TDC
1432 is most four cylinder engines
take the cap off make sure the rotor is pointng on number one lead on the dissy cap
then to the plug

to get direction ---the next cylinder should be four to compress if not you are turning the engine the wrong way hope that helps
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL