|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-10-2014, 09:09 PM
|
#1 | ||
|
WOGBOY69
Join Date: Nov 2007
Location: brisbane
Posts: 790
|
Hi all
i have a major problem with my peddal box. The sir clip that holds the pin cames of and my clucth peddal moves. Has anyone got any better ideas for this problem.... I was thinking even putting a bolt straite threw ...your thoughts..on this thanks |
||
|
|
|
08-10-2014, 10:28 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
are you able to drill a hole through the pin and pop a split pin in the drilled hole
if you use a bolt make sure its a nulox nut and flat washer that will hold
__________________
My car goes Brumm Brumm |
||
|
|
|
|
09-10-2014, 08:09 PM
|
#3 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Presume you mean the 1/8" thick square section circlip. Probably just stretched.
A photo would help to confirm the item. PM me your address and email...I'll send one to you gratis. |
||
|
|
|
|
09-10-2014, 09:16 PM
|
#4 | ||
|
WOGBOY69
Join Date: Nov 2007
Location: brisbane
Posts: 790
|
Hi dirty hands
that was my first thought . But drilling a hole while its still up there mite be very hard . I realy dont want to pull everything apart again. Booster and pedal box . Its a real pain. Such bad spots to work in. Allanv6gt i dont know about square section. Its at the end were the clucth pedal is round pin and it has a slot on the end of it to put a circlip . The circlip is very new maybe the clucth pedal has play in it and wants to kick out the peddal ..ill send you a pm.. |
||
|
|
|
|
09-10-2014, 09:18 PM
|
#5 | ||
|
WOGBOY69
Join Date: Nov 2007
Location: brisbane
Posts: 790
|
Hi all
just want to know can you pull the pin out while every thing still stays there . Or do you need to pull every thing out thoughts |
||
|
|
|
|
13-10-2014, 05:43 PM
|
#6 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Wogboy, PM today, and email sent yesterday with pics for confirmation of part
|
||
|
|
|
Peddal box pin capri 1972
Linear Mode
