Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Race Brakes Sydney

Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link

Reply
 
Thread Tools Display Modes
Old 19-11-2013, 08:45 PM   #1
Oscar of Markoz
FF.Com.Au Hardcore
 
Oscar of Markoz's Avatar
 
Join Date: Sep 2005
Location: Bonnyrigg Heights, NSW
Posts: 572
Default Info needed

Hey Guys
I have a brake booster and master cylinder that haven't been on the car for quite a few years. Do you guys have a tool that could bench test both for leaks and proper operation?

Also, I have a TF cortina running the hoppers stoppers brake kit, which consists of AU XR8 twin spot calipers up front on falcon discs. The booster is from a Gemini I beleive, not 100 sure, and the Master is a 1" from a XB Falcon.
The rear currently is commodore discs and calipers. But they could be changed to something alittle narrower down the line.

Do you think the Booster is adequate to this setup? Iam after something that isn't as touchy on the brakes as most new cars but still able to pull up well when necessary.

Any info would be great. Thanks

Oscar of Markoz is offline   Reply With Quote Multi-Quote with this Post
Old 20-11-2013, 09:48 AM   #2
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
Default Re: Info needed

Quote:
Originally Posted by Oscar of Markoz View Post
Hey Guys
I have a brake booster and master cylinder that haven't been on the car for quite a few years. Do you guys have a tool that could bench test both for leaks and proper operation?

Also, I have a TF cortina running the hoppers stoppers brake kit, which consists of AU XR8 twin spot calipers up front on falcon discs. The booster is from a Gemini I beleive, not 100 sure, and the Master is a 1" from a XB Falcon.
The rear currently is commodore discs and calipers. But they could be changed to something alittle narrower down the line.

Do you think the Booster is adequate to this setup? Iam after something that isn't as touchy on the brakes as most new cars but still able to pull up well when necessary.

Any info would be great. Thanks
We send them away to get tested and the Cortina set up may be ok i don't think it is over done and you can change brake pads for better bite if needed.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:04 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL