Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 02-04-2013, 06:05 PM   #1
CONGO MILLENNIUM
Regular Member
 
Join Date: Sep 2011
Posts: 98
Default Replace cig socket in AU

I ve searched but I can't find how to replace the cig lighter socket in our AU2 forte. Can it come out from the front or does the centre dash need to come out to gain access? Some thing was jammed into the socket then removed now the fuse keeps blowing. 😠

CONGO MILLENNIUM is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 08:14 PM   #2
Evgeni
Auto Nerd
 
Evgeni's Avatar
 
Join Date: Feb 2012
Location: Sydney
Posts: 808
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: In recognition of the many hours spent scanning information for the benefit of AFF members. 
Default Re: Replace cig socket in AU

From memory you need to take the stereo out. This will give you access to the ciggy bolt that holds it in.
Evgeni is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 09:11 PM   #3
CONGO MILLENNIUM
Regular Member
 
Join Date: Sep 2011
Posts: 98
Default Re: Replace cig socket in AU

Thank you Evgeni apart from needing those u shaped thingies to take out the radio will I need to disconnect any thing else? ����������
CONGO MILLENNIUM is offline   Reply With Quote Multi-Quote with this Post
Old 02-04-2013, 09:32 PM   #4
Evgeni
Auto Nerd
 
Evgeni's Avatar
 
Join Date: Feb 2012
Location: Sydney
Posts: 808
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: In recognition of the many hours spent scanning information for the benefit of AFF members. 
Default Re: Replace cig socket in AU

Ok just had a look. Take the stereo out, take the ash tray out. There is 4 screws that hold the front panel in. Two behind the ash tray and the other two along the top outer edges of the stereo recess. This frees the front panel and it looks like the ciggy lighter just pushes in or pushes out once you undo the spade connector.
Evgeni is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2013, 02:29 AM   #5
CONGO MILLENNIUM
Regular Member
 
Join Date: Sep 2011
Posts: 98
Default Re: Replace cig socket in AU

Thanks mate ill give it a go
CONGO MILLENNIUM is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL