|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-09-2017, 05:23 PM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2015
Posts: 2
|
Hey everyone
Local Ford dealer is telling me that whilst I have a few thousand ks left in my rear pads, if I change them, I need to change the rotors as well? I've never heard of changing rotors unless they are damaged by low pads or they're warped etc. Is this true or are they taking the ****? Apparently the ST rotors can't be machined as they would then be too thin? They've never been machined before, car has done 65000ks. Thanks! |
||
|
|
|
12-09-2017, 06:45 PM
|
#2 | ||
|
Regular Member
Join Date: Aug 2015
Posts: 163
|
Certainly not always. Only if there is an issue with them.
If they need replacing, then yes, replace them together. I have had a Stealership tell me the rotors needed replacing because there was a lip where the pad didn't run. When asked why the rotor needs replacing if the pad doesn't run there, he had no answer ! |
||
|
|
|
|
12-09-2017, 06:47 PM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2015
Posts: 2
|
Yeah that's what they said to me.
That the pads create a lip at the top and bottom. And new pads will only press against the lip as a result, reducing braking capability. I've never replaced rotors for the sake of it. Just seems like a waste? |
||
|
|
|
|
12-09-2017, 07:12 PM
|
#4 | ||
|
Regular Member
Join Date: Aug 2015
Posts: 163
|
Yeah....sounds like bull**** to me.
|
||
|
|
|
|
12-09-2017, 07:47 PM
|
#5 | ||
|
Barra Turbo > V8
  
Join Date: Jan 2005
Posts: 25,990
|
Put new pads on my old ST with about 70k odd kms never replaced discs. Rears were needing to be done soon though.
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6 -2022 Hyundai Tucson Highlander Diesel N Line |
||
|
|
|
Always change rotors with pads? LW ST
Linear Mode
