AU Temp sensor grommet

[ARL111]

Urgent help required, I was swapping out the temp sensor for my AU coolant tank and the grommet for the temp sensor disintegrated and I can't find one in NZ.

I dont really want to buy a new coolant tank just for the grommet.

can anyone help me please.

Thanks in advance.

Jason.

[macman]

I assume you're referring to the level-low sensor in the high-series coolant tanks.

From past experience, the replacement sensor comes with the grommet (when purchased new as a spare part anyway).

But you can buy the grommet separately (on ebay or your local parts supplier) - https://www.ebay.com.au/itm/GENUINE-...L/300566115155

If you need the car driving and can't wait for postage for the above item, you could try a wrecker - even if you get a tank without the sensor, you can still use it, just obviously can't connect the sensor. BUT it's only a low-level warning sensor so AFAIK it won't affect drivability/safety as long as you visually make sure your coolant isn't low (dash may still alert you the level is low).

[Bill M]

Is this it?
https://www.ebay.com.au/itm/GENUINE-...frcectupt=true

[ARL111]

Originally Posted by Bill M

Is this it?
https://www.ebay.com.au/itm/GENUINE-...frcectupt=true

Yes it is thanks. Just ordered some

[ARL111]

Originally Posted by macman

I assume you're referring to the level-low sensor in the high-series coolant tanks.

From past experience, the replacement sensor comes with the grommet (when purchased new as a spare part anyway).

But you can buy the grommet separately (on ebay or your local parts supplier) - https://www.ebay.com.au/itm/GENUINE-...L/300566115155

If you need the car driving and can't wait for postage for the above item, you could try a wrecker - even if you get a tank without the sensor, you can still use it, just obviously can't connect the sensor. BUT it's only a low-level warning sensor so AFAIK it won't affect drivability/safety as long as you visually make sure your coolant isn't low (dash may still alert you the level is low).

Thank you very much, just ordered two.

[Bill M]

Oops! I think macman had it right first. I didn't see his post.
Good luck with the fix ARL111.
cheers
Bill