E Series Edit Arriving Nov!!

**Bluepower** · 24-10-2006, 04:00 PM

I have been advised that E series Edit products will be availible to tuners beginning next month.

Pricing is still yet to be assorted, but first in will be getting the killer deals.

Please feel free to book in your E series now.

Chris Finnin
Bluepower Racing Developments

Craig · 24-10-2006, 04:17 PM

Put me down for a EL fairmont 6cyl sedan please dude......

dansedgli · 24-10-2006, 04:35 PM

How would these Edit's go on a forced E series?

Can they be tuned for fairly high boost levels? 15psi+?

Is there problems with the map sensor above these levels?

347_XR8 · 24-10-2006, 05:33 PM

What about cars (i.e mine) running a uni-chip setup...guessing wouldn't need a edit?

**Bluepower** · 24-10-2006, 05:43 PM

Guys, give me the 4 digit alpha numeric code off your computers, im full time writing tunes as we speak...

FRDGAL · 24-10-2006, 05:55 PM

About time. They've been promising this for far too long so it's good to hear that it's finally ready for market and bookings are being taken. I have a feeling there's about to be alot of very happy (and quick) e-series boys & girls :eclipsee_

347_XR8 · 24-10-2006, 05:58 PM

Will call ya tomorrow Chris

**Chris** · 25-10-2006, 09:55 AM

been having a great flick through the software, looks like a snap!

cArSiK · 25-10-2006, 10:40 AM

Are these units an Edit in the sense of a FLASH uploded onto the PCM or is it a plug in chip to override parameters like chiptorque? Sounds interesting!

CHeers
James

Craig · 25-10-2006, 11:51 AM

Dude change my order to 3 please.

EL 6cyl x 2
EF 6cyl x 1

**Professor Farnsworth** · 25-10-2006, 12:10 PM

codes sent via pm! BOOK ME IN SCOTTY

**Chris** · 25-10-2006, 12:36 PM

ok, been going through all the codes, some are good, some are not.

The numbers must be read off the PCM. 4 obvious alpha-numeric digits.

pricing to come soon..........

Sprint_ED · 25-10-2006, 05:49 PM

THANK GOD

BOOK ME IN

XR8 Sprint, 2DDA,

but i might call you and confirm

Redrum · 25-10-2006, 06:07 PM

Great news Chris. This is good for my project EL down the track, now just need that promotion to finance that cruiser (race motor).

**Professor Farnsworth** · 25-10-2006, 06:20 PM

lol @ my code being not supported yet

Gunns · 26-10-2006, 07:27 PM

Put me down. (finally it is here)

1TUFFUTE · 27-10-2006, 08:54 PM

how long will the tuning take on average do ya think

FPV8U · 31-10-2006, 10:41 PM

Will this program tune XH falcon utes as i have a mate who may be interisted, could you give me a rough price too chris just an estimate to throw at him as he's a bit of a tight @$$?

**Chris** · 01-11-2006, 07:50 AM

Quote:

Originally Posted by FPV8U

Will this program tune XH falcon utes as i have a mate who may be interisted, could you give me a rough price too chris just an estimate to throw at him as he's a bit of a tight @$$?

hee hee buddy i know the type.........

When this software was coined to be released, my early hopes were that we could do these edits for around the 750 mark, as we feel that is comensurate with value/age/mods to vehicles.

unfortunately, that wont happen, I was surprised at my own buy prices for the modules, but i know this is at the SCT US end, not Capa's fault.

Its looking like the introductory deal will be $1100-1200 somewhere, depending upon car and mods, I did promise EEC4 and 5 owners an introductory deal, after the initial cars are done, the price will be reset to a normal RRP, approx 1495 or thereabouts.

Chris

EA6 · 01-11-2006, 08:16 AM

What will your average retune cost after the initial purchase?

cArSiK · 01-11-2006, 08:32 AM

Quote:

Originally Posted by cArSiK

Are these units an Edit in the sense of a FLASH uploded onto the PCM or is it a plug in chip to override parameters like chiptorque? Sounds interesting!

CHeers
James

^ does anyone know the answer to my question ?

:

**Chris** · 01-11-2006, 08:57 AM

Quote:

Originally Posted by EA6

What will your average retune cost after the initial purchase?

at this stage, nothing

:

**Chris** · 01-11-2006, 08:57 AM

Quote:

Originally Posted by cArSiK

^ does anyone know the answer to my question ?

:

plug in reprogrammable chip

ORSMEB · 01-11-2006, 11:12 PM

Hey Chris,
I will seriously be wanting this! I'll be in touch

banarcus · 02-11-2006, 09:34 AM

Any V8 guys that have a auto and need a 3DFA, give me a PM. Might be able to do a swap.

XR6TickfordBoy · 04-11-2006, 05:56 PM

Do u have the software yet? as I had my car booked in at G&D and they had to cancel as the software isnt in yet. How much would u charge for my car (EL XR6, extractors, hi-flo cat, 2.5" exhaust, pod filter in air box). I would also be interested in getting a cam installed and tuned at the same time so if u could give me a quote on a package that would be much appreciated!

**Chris** · 04-11-2006, 09:29 PM

Hi mate,

G and D are waiting for the software, as are ourselves. Feel free to contact me on monday and im happy to work through some packages with you.

I can assure you that it now appears that we (site sponsors) will all reciece the products at the same time.

Chris

**Professor Farnsworth** · 05-11-2006, 02:10 AM

Quote:

Originally Posted by Chris

Hi mate,

G and D are waiting for the software, as are ourselves. Feel free to contact me on monday and im happy to work through some packages with you.

I can assure you that it now appears that we (site sponsors) will all reciece the products at the same time.

Chris

Chris how are we going with the 'odd' computer code that I and a few other members have ? busting to get this tune!

Richard_86 · 06-11-2006, 11:31 PM

Just wondering if i'd possibly be able to get a price for the edit on an EL with a Jim Mock DEV3HL kit, looking at getting all this done early next year when i finish getting the finances.

Sprint_ED · 11-11-2006, 12:13 AM

chris, any updates on this ???